Search results for "bass":

Minimum box length is 7 inches. Box not included. Includes 11 inch scale neck that is sanded and finished. Neck has hanger bolt and hardware for easy mounting on any box. Frets and real Rosewood fret board installed, includes pre-slotted nut. Four high quality enclosed tuners with hardware. Rosewood bridge with saddle and two filler plugs. Four labeled nylon strings. Watch the Concert Ukulele kit video but make sure to check for 11 inch scale length. Ukulele Kit Includes: Neck w/hanger bolt & hardware 4 Enclosed Tuners (2 left & 2 right) & tuner hardware Nylon strings (labeled) Rosewood bridge w/bone saddle (two filler plugs) Note: Box/body not included! Watch This Video: Watch This Video:

This aluminum resonator cone is great for adding that unique resonator sound to your next build! Dimensions: 6" Diameter x 0.47" Height/Depth. It creates a unique sound & has great tone. Fits 5 1/4 inch hole Made from aluminum for durability. Learn more about this Resonator by watching the below video!

Heavy duty industrial grade piezo disc. Defined solder pads makes soldering easier and minimizes damages. This has been our favorite piezo for many years and used on a large quantity of our builds. 3 pack 35mm discs / 1-38" diameter Solder pads

Molded plastic knob suitable for all knob applications. Fits snugly and securely on standard pots. Part it .500 inches long and measures .550 on the bottom end and .540 at the top. Recommend using a 9/16 drill and gluing in place. Plastic Also available in 100 pack

Perfectly Pitched To A440. Designed to offer accurate tuning, it delivers clear tone and sound. Made from stainless steel for durability. Simple yet effective its suitable for tuning any instrument. This genuine tuning fork gives you a more interesting way to test pickups and piezos. Tuned to A440.

Available in chrome, black and gold these ferrules are used to guide and anchor strings. The measure .36" long and .36 wide at the top flange, the knurled center measures .29". Use a 5/16" drill to make a hole. Press the ferrule into the hole and use a small amount of glue if desired. 12 ferrules are provided in a poly bag.

New from MGB. Low cost high quality tuners.  Pack includes 2 right and 2 lefts. For 1/2 inch headstock. Available in black or chrome. Use 5/16 drill for ferrule and 1/4 drill for axle. Brad point drills work best Available in individual pack or 3 Pack

MGB Maple Biscuit Bridge for Resonators Made from well aged maple. Easy to stain or paint. Some sanding required. Oversized to allow a perfect, final fit to your instrument. Watch this video!

A very handy tool for testing components. You can connect the leads on your pickup directly to your amp. You can also use the alligator clips to make additional connections.

MGB Mini Top Hat Knob Smaller than standard knob Fits standard v/t pots Lower profile and shorter width allow unobtrusive access to v/t

This template is helpful for locating the bridge when using an Easy Neck. Always check to confirm 24 inch distance from the front of neck to front the edge of saddle.

Designed to work with our MGB Micro Pup 3/4 String Single Coil Flat Pickup Dimensions: 1.4" x 2.7" with a thickness of .25" Antique Brass finish Includes hardware Compatible with: MGB Micro Pup 3/4 String Single Coil Flat Pickup Shim Available here.

Imitation pearl fret markers are 1/4 inch in diameter. Easy to install. Mark locations for markers. Drill shallow hole using 1/4 inch flat bottom or brad point drill bit. Test drill depth on a scrap piece of wood. Glue markers in place using super glue. Carefully sand to finished height. If you drill too deep you can stack two markers to fix the problem. Imitation Pearl 10-Pack 1/4" Diameter

Designed to work with our 3/4 String Mini Box Bucker Pickups. Aluminum stamped Plated black finish Includes black hardware Compatible with: MGB Mini Box Bucker Pickup 4.0 | 3/4 String Shim available here.

The Easy Connector is a quick and easy way to connect electrical components without solder. Strip the wires back 1/4" then press the lever and insert the wire. There are 6 openings along the ground end for connecting all the grounds to a common. There are 4 openings along each side for splicing wires, for example connecting the the hot wire from a pickup to the hotwire on a harness. These spring style connectors provide a solid connection which provide a solid reliable connection. They are sized for 20-24 gauge wires which are commonly used on components.