Sold out
3-Pack Economy Volume/Tone/Jack Harness
3-Pack Economy 250K Volume/Tone/Jack Harness $9.50
Includes 250k volume pot and 250k tone pot with .047 mfd cap. Harness includes the ground wire for bridge and leads for connection to pickup or piezo. Mounting hardware included. 250k volume pot 250k tone pot .047 mfd cap Watch this video!
Sold out
3-Pack Economy Volume/Tone/Jack Harness
3-Pack Economy 500K Volume/Tone/Jack Harness $11.00
Includes 500k volume pot and 500k tone pot with .047 mfd cap. Harness includes the ground wire for bridge and leads for connection to pickup or piezo. Mounting hardware included. 500k volume pot 500k tone pot .047 mfd cap Watch this video!
Volume/Tone/Jack Harness
Volume/Tone/Jack Harness no $11.00
High quality 500K Volume & Tone pots. Premium jacked wire with heat shrink connections. Premium jacked wire Connections sealed with heat shrink High quality 500K potentiometers .047 mfd cap Watch this video! Watch this video!
Economy 3-Way Volume/Tone/Jack Harness
Economy 3-Way Volume/Tone/Jack Harness $7.00
Includes 250 or 500k volume pot and matching tone pot with .047 mfd cap. Harness includes the ground wire for bridge and leads for connection to pickup or piezo. Includes a 3-way installed switch. Mounting hardware included. 500k volume pot 500k tone pot .047 mfd cap Watch this video!
Wiring Harness w/ Push-Pull Pots
Wiring Harness w/ Push-Pull Pots $7.50
Pre-soldered jack, push-pull pot, with a capacitor. To connect a push-pull harness to a Box Bucker Gen 2 or any other split coil pickup connect as follows. There is a long black wire which is the ground wire for the bridge. The shorter black wire includes a white lead that goes to the hot on the pickup , the bare jacket wire goes to the ground from the pickup.  The center tap wires, usually red/green  connect to one of the top tabs on the switch. Push the knob in for humbucking and pull out for single coil. Presoldered jack Push-Pull Pot Capacitor
Standard Guitar Jack with Shielded 12” Lead
Standard Guitar Jack with Shielded 12” Lead $3.00
Standard jack w/ shielded single conductor lead. Standard jack 12" lead Single conductor wire
Volume Pot
Volume Pot $2.50
500K volume potentiometer.
Tone Pot
Tone Pot $3.00
500K tone potentiometer with .047 mfd capacitor.
Green Cap | Guitar Tone Capacitor
Green Cap | Guitar Tone Capacitor $0.75
A high-quality capacitor with a well-balanced mix of lows, mids, and highs. Great for any electric guitars or homemade instruments. High Quality - Brand New Well balanced mix of lows, mids, & highs. 0.047uf
Control Plate | Chrome Control Plate | Chrome
Control Plate | Chrome $12.50
Quality guitar hardware from MGB Guitars. Pre wired Chrome finish Watch this video!
Control Plate | Black Control Plate | Black
Control Plate | Black $12.50
Quality guitar hardware from MGB Guitars. Pre wired Black finish Watch this video!
Control Plate | Gold Control Plate | Gold
Control Plate | Gold $13.50
Quality guitar hardware from MGB Guitars. Pre wired Gold finish Watch this video!
Shielded Single Conductor 18 Single and Double conductor wires with shield 18
Single and Double conductor wires with shield 18" from $0.50
Quality guitar hardware from MGB Guitars. Single  and Double shielded conductor for wiring components.
9V Battery Holder
9V Battery Holder $3.50
Quality Guitar Hardware from MGB Guitars Wire in a 9V battery for active pickup configurations.
10-Pack Small Heat Shrink Tubing 1/8” x 1”
10-Pack Small Heat Shrink Tubing 1/8” x 1” $1.50
Perfect for heat shrinking two single conductor small wires. 10-pack Black color Measures 1/8" x 1.125"
10-Pack Large Heat Shrink Tubing 3/16” x 1
10-Pack Large Heat Shrink Tubing 3/16” x 1" $1.50
Perfect for heat shrinking two single conductor small wires. 10-pack Black color Measures 3/16” x 1.75 "
20-Pack Small Tie Wraps 3
20-Pack Small Tie Wraps 3" $1.50
Small tie wraps for wire management. 3" length. 20 per pack.
Wire Harness with Volume/Tone/Blending Wire Harness with Volume/Tone/Blending
Wire Harness with Volume/Tone/Blending $5.50
MGB wire harness for multiple pickups with volume/tone/blending allows infinite pickup placement and broader range of sound and tone. Presoldered v/t/blending pots and input jack Wire harness designed for multi pickup set up
Jack Plate Jack Plate
Jack Plate $2.00
1.3 inches by 1.3 inches, with a .37 inch hole. Hardware included Available in Chrome or Black
RSG Pickup- Mini Box Bucker or Micro Pup RSG Pickup- Mini Box Bucker or Micro Pup
RSG Pickup- Mini Box Bucker or Micro Pup from $19.50
The RSG pickup is a complete system that includes a pickup, harness and cover ready to install. Uses an MGB 4.0 Mini Box Bucker pickup which is soldered to a 500K economy harness, or a 3.0 Micro Pup and 250K harness. The pickup is secured into a cover. This pickup can be mounted anywhere between the neck and the bridge to provide excellent sound. The cover is .3 inches thick so make sure there is a .3 difference between the top of the frets and the top of the box. Assembly is quick and easy, simply drill a one inch hole at the pickup location and feed the jack and pots through the hole, secure the pickup with the provided screws then mount the pots and the jack. The RSG pickups are available in four popular finishes including shiny aluminum, black, gold and antique brass. Each pickup is fully tested to insure optimum performance. 
Cable Piezo
Cable Piezo $7.50
Cable piezo Piezo section is 3.5 inches long Cable section is 12 inches long 2.5mm plug  Plug can be removed wire can be connected to other components
MGB Preamp Equalizer MGB Preamp Equalizer
MGB Preamp Equalizer $17.50
Included is a preamp/equalizer, tuner and battery box. Works with all piezos that connect with a 2.5mm plug.  Included are template/trim rings for mounting the components. The battery box uses two 2032  round batteries (not included) which are installed positive side up. Wire management components are included. A plug will need to be installed in the jack for the tuner to operate.  Click here for Router Template
Test Lead Kit Test Lead Kit
Test Lead Kit $4.00
A very handy tool for testing components. You can connect the leads on your pickup directly to your amp. You can also use the alligator clips to make additional connections.
Guitar Cable 20 foot long Guitar Cable 20 foot long
Guitar Cable 20 foot long $12.50
Includes 1/4inch straight and right angle metal connectors, ensures a secure connection to any instrument, pedal, or amp jack.  Pliable 20ft guitar cable protected by high-quality pvc jacket and braided tweed cloth outer jacket, minimzing twisting, kinking and tangling.  Black with gray accent cotton weave outer jacket. Suitable for mixer, power amplifier, effects pedals, equalizer, electronic organ, electric guitar, electric bass and other electronic equipment. 
Ghost Pups with harness Ghost Pups with harness
Ghost Pups with harness from $17.50
In some builds it is preferred to place the pickup under the lid of the box, this practice is often referred to as "ghosting". Many builders have had good success using the MGB flat pups for these applications.  MGB is proud to introduce our new Ghost Pups. These flat pups/harness assemblies are ideal for ghosting. The pickups include a high quality 3M adhesive pad for securing the pup to the lid of the box. They work best if the surface of the box is relatively smooth. Additional adhesive such as E6000 may be needed for rough surfaces. The harnesses includes volume and tone pots along with a jack. A ground wire for the the bridge and the hardware are also included.  500k pots are used on the double coil pickups and 250k pots are included on the single coil pickups. The Lucky 13 and Point Five O are stronger pickups and best suited where the distance to the string is greater than 1/4 inch.
Preamp Marking/Router Template Preamp Marking/Router Template
Preamp Marking/Router Template $5.00
Works for the Tuner/Preamp or the 9 volt preamp Suggest using Amana Tool's 47222 router bit
9 Volt Preamp/Equalizer Kit 9 Volt Preamp/Equalizer Kit
9 Volt Preamp/Equalizer Kit $21.00
Preamp/equalizer 9v (battery not included) Mounting hardware included Cable Piezo Includes template/trim ring with screws Includes jack plate, drill 1 inch clearance hole Includes modified ukulele saddle Works perfectly with all MGB ukulele kits Preamp/Equalizer router template