Sold out
Rosewood Slotted Finger Fret Board | 25.5 Rosewood Slotted Finger Fret Board | 25.5
Rosewood Fret Board | 25.5" Scale $12.50
Beautiful High Quality Rosewood Check the length of the fretboard at the 12th fret down from nut end, it should measure 12 3/4 inches. Trim at nut end as needed 0.25 inches thick 18.5 inches long 1.63 inches wide at the narrow end 2.06 inches wide at the wide end 25.5 inch scale length Suitable for 3 or 4 or 6 string applications   Perfect for builders who want to build their necks but want a precisely made finger board. Board is .25 inches thick, 18.5 inches long, 1.63 inches wide at the narrow end and 2.06 inches wide at the wide end. Board is set for 25.5 inch scale and is suitable for 3 and 4 string applications. Made of genuine rosewood, all boards were hand selected for premium color and grain pattern.
Fret Wire Kit - 2.4 mm x  22 pieces 10-Pack Bulk Fret Wire 19ft
Fret Wire Kit - 2.4 mm x 24 pieces $6.00
22 piece nickel-silver medium fret wire kit ready to be installed into a slotted neck. Nickel-silver Medium fret wire 22 Piece 2.4mm Complete dimension info in images 
Fretboard Clamping Caul
Fretboard Clamping Caul $22.50
Outstanding Support. Made from heavy duty aluminum, for greater support and durability. Dimensions: 1.5 “ x 1" x 23.5" Evenly distributes pressure. Heavy duty aluminum clamping caul helps keep your neck and fretboard flat through the gluing process. Watch this video!
3-Pack Fret Marker Small | Black
3-Pack Fret Marker Small | Black $2.50
3-Pack Fret Marker Small | Black is 1/16 inch in diameter. Easy to install. Mark locations for markers. Drill shallow hole using 1/16 inch flat bottom or brad point drill bit. Test drill depth on a scrap piece of wood. Glue markers in place using super glue and cut down flush. Carefully sand to finished height. Black 3-Pack 1/16" Diameter
Black Fret Markers
Black Fret Markers $2.50
<p>Black fret markers are 1/4 inch in diameter. Easy to install. Mark locations for markers. Drill shallow hole using 1/4 inch flat bottom or brad point drill bit. Test drill depth on a scrap piece of wood. Glue markers in place using super glue. Carefully sand to finished height. If you drill too deep you can stack two markers to fix the problem.</p><ul><li>Black</li><li>10-Pack</li><li>1/4" Diameter</li></ul>
Imitation Pearl Fret Markers
Imitation Pearl Fret Markers $3.00
Imitation pearl fret markers are 1/4 inch in diameter. Easy to install. Mark locations for markers. Drill shallow hole using 1/4 inch flat bottom or brad point drill bit. Test drill depth on a scrap piece of wood. Glue markers in place using super glue. Carefully sand to finished height. If you drill too deep you can stack two markers to fix the problem. Imitation Pearl 10-Pack 1/4" Diameter
Sold out
Diatonic Maple Slotted Fretboard | 25.5
Diatonic Maple Slotted Fretboard | 25.5" Scale $17.50
Perfect for builders looking to build their necks but want a precisely slotted finger/fret- board. Using a diatonic scale layout these are often used on dulcimers. This fret board is pre-cut with 16 slots and includes a nut slot. Look of the fretboard will vary from piece to piece due to the nature of wood. Ready to be cut/sanded down to preferred size! Species: Maple 21" Long 2" Width 16 Pre-Slotted Frets Suitable for 3 or 4  string applications 25.5 inch scale length Handmade in the USA
10-Pack Bulk Fret Wire 19ft 10-Pack Bulk Fret Wire 19ft
20824 from $23.00
Medium fret wire in bulk.  Nickel silver Medium fret wire size Straight 11 inch length cuts Ships in 25 piece bundles  Complete dimension info in images 1 bundle equals .42 pounds and works out to 54.76 per pound 2 bundles equal .84 pounds and works out to $52.38 per pound 4 bundles equals 1.69 pounds and works out to $50.89 per pound 8 bundles equal 3.38 pounds and works out to $47.33 per pound
MGB Zebrano Slotted Fretboard | 25.5 MGB Zebrano Slotted Fretboard | 25.5
MGB Zebrano Slotted Fretboard | 25.5" Scale $21.00
Perfect for builders looking to build their necks but want a precisely slotted finger/fret- board. This fret board is pre-cut with 24 slots and includes a nut slot. Width is 2.5 inches along the full length. Length will vary from 22-24" long.  Look of the fretboard will vary from piece to piece due to the nature of wood. Ready to be cut/sanded down to preferred size! Species: Zebrano 22" - 24" Long 2.5" Width 24 Pre-Slotted Frets Suitable for 3, 4 or 6 string applications 25.5 inch scale length Handmade in the USA
Maple Fret Board | 25.5
Maple Fret Board | 25.5" Scale $9.50
Beautiful High Quality Maple 0.25 inches thick 19 inches long 1.63 inches wide at the narrow end 2.25 inches wide at the wide end 25.5 inch scale length Suitable for 3 or 4 or 6 string applications   Perfect for builders who want to build their necks but want a precisely made finger board.    Check the length of the fretboard at the 12th fret down from nut end, it should measure 12 3/4 inches. Trim at nut end as needed.
Bulk Jumbo Fret Wire 230 inches
Bulk Jumbo Fret Wire 230 inches $19.00
Bulk fret wire in bulk.  Nickel silver Jumbo fret wire size Straight 11.5 inch length cuts Ships in 20 piece bundles 
Four Pack Zero Frets Four Pack Zero Frets
Four Pack Zero Frets $3.00
Included are 4- 3 inch lengths of Jumbo fret wire. These can be placed in the zero fret slot. they are the perfect height when used with medium frets in the remaining slots.
Zero Fret String Spacer Zero Fret String Spacer
Zero Fret String Spacer from $1.00
Perfect for keeping strings aligned when using a zero fret. Available in Cherry, Maple or Rosewood. 1.5" wide, .3 " tall and .2 inches thick. Remove mask on Cherry and Maple before gluing in place. Make sure strings rest firmly on the zero fret, adjust slots if need be.
Easy Fretter Pre-loaded fretboard Easy Fretter Pre-loaded fretboard
Easy Fretter Pre-loaded fretboard $15.00
The Easy Fretter is a pre loaded and ready to go fretboard that is sized to fit the 2 inch material found at the big box stores. It is made from black composite material.  Ultra smooth satin finished composite fretboard 25 1/2 inch scale 19 3/8 inches long 1 1/2 inches wide  .24 inch thick Available in Chromatic and Diatonic 21 frets on Chromatic and 13 on Diatonic  Face fret markers on Chromatic Zero fret installed  Zero fret is .020 taller than other frets Rosewood string spacer included for either 3 or 4 strings Use woodworking glue to secure the fretboard to the neck. Strongly encourage using a clamping caul to help keep the neck and fret board straight. The string spacers mount at the end to keep the strings aligned. 
Truss Rod 18 inch Truss Rod 18 inch
Truss Rod 18 inch $12.50
Two way action can correct either a backbow or upbow on a neck.  Twin steel rods and brass threaded blocks allow for precise adjustments to get the perfect alignment on the neck. 4mm hex wrench included. We suggest creating a slot about .25 inches wide .5 inches deep in the neck. Make sure the slot is deep enough so that fretboard does not rest on the brass nuts. Also use a dab of E6000 or silicone caulk under each nut to prevent them from moving, do not glue the rods. The slot should be long enough to conceal the adjustment nut under the neck and/or nut.
Small Nut Small Nut
Small Nut $1.50
Measuring 1.4 inches wide, .3 inches all and .2 inches thick these nuts are well suited for ukuleles and other builds with thinner fretboards. They are available blank, three or four string slots.
Sold out
Truss Rod Cover Truss Rod Cover
Truss Rod Cover $2.50
3 ply black with white center.  Screws included Two Pack
Easy Fretter-Maple or Rosewood fretboard Easy Fretter-Maple or Rosewood fretboard
Easy Fretter-Maple or Rosewood fretboard from $17.50
The Easy Fretter is a pre loaded and ready to go fretboard that is sized to fit the 2 inch material found at the big box stores. 25 1/2 inch scale 19 3/8 inches long 1 1/2 inches wide  .24 inch thick Available in Maple or Rosewood 21 frets Face fret markers  Zero fret installed  Zero fret is .020 taller than other frets Rosewood string spacer included for either 3 or 4 strings Use woodworking glue to secure the fretboard to the neck. Strongly encourage using a clamping caul to help keep the neck and fret board straight. The string spacers mount at the end to keep the strings aligned. 
Easy Fretter Rosewood Diatonic Pre-loaded fretboard Easy Fretter Rosewood Diatonic Pre-loaded fretboard
Easy Fretter Rosewood Diatonic Pre-loaded fretboard $17.50
The Easy Fretter is a pre loaded and ready to go fretboard that is sized to fit the 2 inch material found at the big box stores. It is made from Rosewood.  Ultra smooth satin finished composite fretboard 25 1/2 inch scale 19 3/8 inches long 1 1/2 inches wide  .24 inch thick 13 Frets on Diatonic  Zero fret installed  Zero fret is .020 taller than other frets Rosewood string spacer included for either 3 or 4 strings Use woodworking glue to secure the fretboard to the neck. Strongly encourage using a clamping caul to help keep the neck and fret board straight. The string spacers mount at the end to keep the strings aligned. 
Fancy Easy Fretter Rosewood Fretboard Fancy Easy Fretter Rosewood Fretboard
Fancy Easy Fretter Rosewood Fretboard $23.50
NEW Style Easy Fretters! The Easy Fretter is a pre loaded and ready to go fretboard that is sized to fit the 2 inch material found at the big box stores. 25 1/2 inch scale 19 3/8 inches long 1 1/2 inches wide  .24 inch thick 21 frets Face fret markers  Zero fret installed  Zero fret is .020 taller than other frets Rosewood string spacer included for either 3 or 4 strings Use woodworking glue to secure the fretboard to the neck. Strongly encourage using a clamping caul to help keep the neck and fret board straight. The string spacers mount at the end to keep the strings aligned.