All products
3/4 String Mini Box Bucker Covers
Accessories
Bass Guitar Parts
Best Selling Products
Buy Cigar Box Guitar Parts
Buy Guitar Bridges
Buy one, get 50% off a second one
CBGLife™ Accessories & More
CBGLife™ Hats
Cigar Box Guitar Builders
Cigar Box Guitar Kits
Decorative Hardware For Guitars
Discontinued
Guitar Accessories
Guitar Boxes & Bodies
Guitar Control Plates
Guitar Electronics Parts
Guitar Fretboards
Guitar Input Jacks
Guitar Knobs
Guitar Necks
Guitar Pickups
Guitar Resonator Cone & Cover
Guitar Strap Button
Guitar String Retainers
Guitar Strings
Guitar Tailpieces
Guitar Tools
Guitar Tuners
Made in the USA
MGB CBG Collection
MGB Deals
New Guitar Parts
Newest Products
Ready to Play
Sound Hole Covers
Trim Rings & Covers
Ukulele Guitar Parts
MGB Fat Bottom Guitar Body Kit
$45.00
Note: current Fat Bottom kits do not include the neck notches. MGB Guitars is proud to introduce its Fat Bottom guitar body kit. This is the same body that MGB has used to create his unique cigar box mosaic guitars. Measuring roughly 12 inches by 16 inches the kit includes a 1/4 top panel, two ¾ inch thick center rings and a 1/4 inch bottom panel that includes pilot holes on the back side should you wish to mount with screws. Current product does not include the slot at the top. Approximately 2” in depth/thickness. Shaped more like a traditional guitar this blank box provides a perfect canvass for creating your own piece of art. Check out the gallery of pictures to see what Mike and others have done with these bodies.
Veteran Made in the USA
Roughly 12 inches by 16 inches
Includes a 1/4 top panel with a cut out for a 1 ½ inch neck, two ¾ inch thick center rings and a 1/4 inch bottom panel
Approximately 2” in depth/thickness.
Includes pilot holes on the back side to mount with screws
Plywood construction with birch veneer
Note: Sanding & Assembly of this kit is required.
Assembly Tips for the MGB Fat Bottom Body Kit:
To assemble the 2 inner rings, we recommend applying a generous amount of wood glue on the top of the "inner bottom" layer, apply the "inner top" layer over top of it, and use several clamps to tightly hold in place. Be sure to wipe any excess glue away. Let the glue dry fully before removing from clamps.
If the cigar box mosaic look is something you are interested in, this is how we lay it out. After you decide where each piece is going to be placed, use wood glue to apply to the top.
The back panel is lined with pre-drilled holes so that you can screw to the inner rings. You can wood glue the back as well if you prefer not to use screws, simply flip the back panel over so that the pre-drilled holes are facing inside and out of view.
Body Kit Mesh Binding
$7.50
Polypropylene mesh strap material perfect for all MGB guitar body kits. 1-7/8" x 52" Roll.
MGB Fat Bottom F-Hole & Box Bucker Pickup Pre-Cut Top
$15.00
Note: current Fat Bottom kits do not include the neck notches. This is an optional top to use with our MGB Fat Bottom Guitar Body Kit with pre-cut f-holes and MGB "Box Bucker Gen 2" holes. Ready for sanding and finishing. Current product does not include the slot at the top.
Note: Pickup is not included.
Compatible with the following pickups:
MGB "Box Bucker Gen 2" Humbucker | 3 String Pickup
MGB "Box Bucker Gen 2" Humbucker | 4 String Pickup
MGB Fat Bottom F-Hole Pre-Cut Top
$15.00
Note: current Fat Bottom kits do not include the neck notches. This is an optional top to use with our MGB Fat Bottom Guitar Body Kit with pre-cut f-holes. Ready for sanding and finishing. Current product does not include the slot at the top.
Easy Box Double Sided Enclosure
from $19.50
MGB Guitars is proud to introduce their Easy Box enclosure. This innovative enclosure has two sides with two distinct uses. One with a sound hole and one with out. This box was designed and built using the same principles used in acoustic instrument construction. The box is built using purfling and braces to create an incredibly strong and rigid structure. Additional reinforcements were added to key locations to allow when securing bridges. Cover plates are available to cover the sound hole when it is on the back side.
Measuring 9 3/4 inches by 7 inches and 2 1/2 thick the box is made from thin ply with a top veneer of Sapele. IT comes in two versions one is unfinished and the other has several coats of spray finish. This box provides a perfect canvass for creating your own piece of musical art. The photo of the box split in two is to show the placement of internal components.
Roughly 7 inches by 9.75 inches
Approximately 2 1/2 inches deep
Acoustic side includes 2 3/8 inch sound hole
The box head is a full 5/8 thick
Multiply construction with Sapele veneer
.
Easy Box LP Enclosure
$40.00
MGB Guitars is proud to introduce their Easy Box LP enclosure. The box is built using purfling and braces to create an incredibly strong and rigid structure. Made to fit most standard modern license plates. Opening measures 6 inches by 12 inches.
Measuring 9 inches by 14 3/4 inches and 1 7/8 thick the box is made from thin ply with a top veneer of Sapele. Light sanding might be needed. Box can be stained or painted to taste. Mounting holes are provided for the volume and tone control. This box works perfectly with the Super Neck and Easy Neck. With a Super Neck the bridge or saddle will be roughly 4 1/4 inches from the left edge of the plate. Ghosting a Mini Box Bucker 8.0 on the back side of the plate provides solid output. Secure with hot glue or epoxy and make sure to have the magnet face the strings.
This box provides a perfect canvass for creating your own piece of musical art. Search EBAY for a cool vanity plate.
Roughly 9 inches by 14.75 inches
Approximately 1 7/8 inches deep
The box head wall is a full 5/8 thick
Multi-ply construction with Sapele veneer
Plate mounting hardware included
.
Filligree Easy Box XL Enclosure
$32.00
Measuring 12 inches by 8 inches and 2 1/2 thick the box is made from thin ply with a top veneer of Sapele. Attractive filigree pattern is laser engraved in top. Box includes matching back cover and control plate.
Roughly 12 inches by 8 inches
Approximately 2 3/8 inches deep
The box head is a full 5/8 thick
Multiply construction with Sapele veneer
.
Bigfoot Easy Box Double Sided Enclosure
$25.00
MGB Guitars is proud to introduce their Bigfoot Easy Box enclosure. This innovative enclosure has two sides with two distinct uses. One with a sound hole and one with a Bigfoot sound hole. This box was designed and built using the same principles used in acoustic instrument construction. The box is built using purfling and braces to create an incredibly strong and rigid structure. Additional reinforcements were added to key locations to allow when securing bridges. Cover plates are available to cover the sound hole.
Measuring 9 3/4 inches by 7 inches and 2 1/2 thick the box is made from thin ply with a top veneer of Sapele. IT comes in two versions one is unfinished and the other has several coats of spray finish. This box provides a perfect canvass for creating your own piece of musical art. The photo of the box split in two is to show the placement of internal components.
Roughly 7 inches by 9.75 inches
Approximately 2 1/2 inches deep
Acoustic side includes 2 3/8 inch sound hole
The box head is a full 5/8 thick
Multiply construction with Sapele veneer
.
Bigfoot Easy Box XL Double Sided Enclosure
$27.50
MGB Guitars is proud to introduce their Easy Box XL enclosure. This innovative enclosure has two sides with two distinct uses. One with a sound hole and one with Bigfoot sound hole. This box was designed and built using the same principles used in acoustic instrument construction. The box is built using purfling and braces to create an incredibly strong and rigid structure. Additional reinforcements were added to key locations to allow when securing bridges. Cover plates are available to cover the sound hole.
Measuring 11 1/2 inches by 8 inches and 2 1/2 thick the box is made from thin ply with a top veneer of Sapele. This box provides a perfect canvass for creating your own piece of musical art. The photo of the box split in two is to show the placement of internal components.
Roughly 11 1/2 inches by 8 inches
Approximately 2 3/8 inches deep
Acoustic side includes 2 5/8 inch sound hole
The box head and tail are a full 5/8 thick
Multiply construction with Sapele veneer
.
Torano Exodus 4 String Kit
$125.00
Kit includes everything needed to complete this attractive 4 string instrument. Available in three or four string. Available in chrome, black or antique brass finishes.
Included are:
10" x 6.5" x 2.5" colorful box that is fully machined, reinforced and ready for assembly.
24 inch scale Okume and Maple fretted neck predrilled for four tuners. Neck reinforcement plate is included. String slots on nut are filed but may require minimal adjustments after assembly.
Powered by an MGB 750 pickup. Pickup is pre-soldered to harness and ready for easy installation.
Includes tuners, knobs and strap pins,
Includes a jack plate and back cover plate.
Includes a 3 pack of .013, .017 .026 and .036 strings.
Use a 7/16" socket or wrench to tighten hanger bolt and and 10 mm socket or wrench to tighten tuner ferules.
Assembly available HERE
Metal Resonator Kit 3 or 4 string
$175.00
MGB kits are made for people with a fundamental knowledge of building stringed instruments. There are many videos available on our Youtube Channel that can provide help. We are also available by phone to help.
Kit includes everything needed to complete this attractive resonator style box instrument. Available in three or four string. Although this a little more complicated build we are here to help, just give us a call.
Included are:
11" x 7" x 2.5" aluminum box that is fully machined, reinforced and ready for assembly.
24 inch scale Okume and Maple Deluxe Easy Neck predrilled for three or four tuners. Neck reinforcement plate is included. String slots on nut are filed but may require minimal adjustments after assembly.
Powered by an MGB 4.0 Mini Box Bucker pickup. Pickup is pre-soldered to harness and ready for easy installation.
Includes tuners, knobs and strap pins.
Resonator cone, cover, biscuit bridge with several shims for final action adjustment.
Includes a 3 pack of .013, .017 .026 or .013, .017 .026 and .036 strings.
Use a 7/16" socket or wrench to tighten hanger bolt and and 10 mm socket or wrench to tighten tuner ferules.
Assembly available HERE
Tabak Three String Kit
$95.00
Kit includes everything needed to complete this attractive 3 string instrument.
Included are:
11" x 6.5" x 2" box that is fully machined, reinforced and ready for assembly.
24 inch scale Easy Neck Rosewood and Okume fretted neck predrilled for 3 tuners. Neck reinforcement plate is included. String slots on nut are filed
Micro Pup with cover , mounting hardware and knobs.
Black tuners, bridge, strap pins and back cover.
Includes a black jack plate.
Includes a 3 pack of .017, .026 and .036 strings.
Use a 7/16 inch deep well socket for the neck hanger bolt and a 10 mm socket or wrench to tighten tuner ferules.
Assembly available HERE
Black Brickhouse 3 or 4 String Kit
$125.00
MGB kits are made for people with a fundamental knowledge of building stringed instruments. There are many videos available on our Youtube Channel that can provide help. We are also available by phone to help.
Kit includes everything needed to complete this attractive 3/4 string instrument.
Included are:
9 1/2" x 7 1/4" x 2" box that is fully machined, reinforced and ready for assembly.
24 inch scale Easy Neck Rosewood and Okume fretted neck predrilled for 3/4 tuners. Neck reinforcement plate is included. String slots on nut are filed
Hot Rail pickup with harness installed. Push/pull switch on tone pot allows selecting between single coil and humbucker.
Mounting hardware and knobs.
Black tuners, bridge, strap pins and back cover.
Includes a black jack plate.
Includes appropriate packs of .013, .017, .026 and .036 strings.
Use a 7/16 inch deep well socket for the neck hanger bolt and a 10 mm socket or wrench to tighten tuner ferules.
Helpful video HERE.
Assembly available HERE
Frank McGrogan gives it a spin.
Red Brickhouse 3 or 4 String Kit
$125.00
MGB kits are made for people with a fundamental knowledge of building stringed instruments. There are many videos available on our Youtube Channel that can provide help. We are also available by phone to help.
Kit includes everything needed to complete this attractive 3/4 string instrument.
Included are:
9 1/2" x 7 1/4" x 2" box that is fully machined, reinforced and ready for assembly.
24 inch scale Easy Neck Rosewood and Okume fretted neck predrilled for 3/4 tuners. Neck reinforcement plate is included. String slots on nut are filed
Hot Rail pickup with harness installed. Push/pull switch on tone pot allows selecting between single coil and humbucker.
Mounting hardware and knobs.
Gold tuners, bridge, strap pins and black back cover.
Includes a black jack plate.
Includes appropriate packs of .013, .017, .026 and .036 strings.
Use a 7/16 inch deep well socket for the neck hanger bolt and a 10 mm socket or wrench to tighten tuner ferules.
Helpful video HERE.
Assembly available HERE
Frank McGrogan gives it a spin.
Blue Mini Resonator Kit 3 or 4 string
$125.00
MGB kits are made for people with a fundamental knowledge of building stringed instruments. There are many videos available on our Youtube Channel that can provide help. We are also available by phone to help.
Kit includes everything needed to complete this attractive resonator style box instrument. Available in three or four string. Although this a little more complicated build we are here to help, just give us a call.
Included are:
10" x 5" x 3" aluminum box that is fully machined, reinforced and ready for assembly. All boxes are anodized blue.
24 inch scale Okume and Rosewood Easy Neck predrilled for three or four tuners. Neck reinforcement plate is included. String slots on nut are filed but may require minimal adjustments after assembly.
Powered by our new MGB US made pickup. Pickup is pre-soldered to harness and ready for easy installation.
Tuners, knobs. stainless tailpiece, strap pins and hardware.
Resonator cone, biscuit bridge with several shims for final action adjustment.
Includes a 3 pack of .013, .017 .026 or .013, .017 .026 and .036 strings.
Birch back cover can be stained painted or used a template for a custom back plate.
Use a 7/16" socket or wrench to tighten hanger bolt and and 10 mm socket or wrench to tighten tuner ferules.
Assembly available HERE
Ace of Spades Easy Box
$30.00
MGB Guitars is proud to introduce their Ace of Spades Easy Box enclosure. This box was designed and built using the same principles used in acoustic instrument construction. The box is built using purfling and braces to create an incredibly strong and rigid structure. Additional reinforcements were added to key locations to allow when securing bridges. Cover plate is included.
Measuring 9 3/4 inches by 7 inches and 2 1/2 thick the box is made from thin ply with a top veneer of Sapele. IT comes in two versions one is unfinished and the other has several coats of spray finish.
Roughly 7 inches by 9.75 inches
Approximately 2 1/2 inches deep
Acoustic side includes 2 3/8 inch sound hole
The box head is a full 5/8 thick
Multiply construction with Sapele veneer
.
6 String Leather Rose Kit
$175.00
MGB kits are made for people with a fundamental knowledge of building stringed instruments. There are many videos available on our Youtube Channel that can provide help. We are also available by phone to help.
Kit includes everything needed to complete this attractive 6 string instrument.
Included are:
11.375" x 6.25" x 2.375" box that is fully machined, reinforced and ready for assembly.
Box is also distressed and has four coats of finish and ready to go.
25.5 inch scale Super Sixer Maple and Rosewood fretted neck predrilled for 6 tuners. Neck reinforcement plate is included. String slots on nut are filed
MGB Hot Tuna pickup with push pull harness allows you to go from single coil to humbucker.
Antique brass knobs, tuners, bridge, strap pins, jack plate and Sapelli back cover.
Includes strings
Use a 7/16 inch deep well socket for the neck hanger bolt and a 10 mm socket or wrench to tighten tuner ferules.
Assembly available HERE
Gecko Easy Box AKA Milton
$25.00
MGB Guitars is proud to introduce their Gecko Easy Box enclosure. This box was designed and built using the same principles used in acoustic instrument construction. The box is built using purfling and braces to create an incredibly strong and rigid structure. Additional reinforcements were added to key locations to allow when securing bridges. Cover plate is included.
Measuring 9 3/4 inches by 7 inches and 2 1/2 thick the box is made from thin ply with a top veneer of Sapele. IT comes in two versions one is unfinished and the other has several coats of spray finish.
Roughly 7 inches by 9.75 inches
Approximately 2 1/2 inches deep
Acoustic side includes 2 3/8 inch sound hole
The box head is a full 5/8 thick
Multiply construction with Sapele veneer
.