All products
3/4 String Mini Box Bucker Covers
Accessories
Bass Guitar Parts
Best Selling Products
Buy Cigar Box Guitar Parts
Buy Guitar Bridges
Buy one, get 50% off a second one
CBGLife™ Accessories & More
CBGLife™ Hats
Cigar Box Guitar Builders
Cigar Box Guitar Kits
Decorative Hardware For Guitars
Discontinued
Guitar Accessories
Guitar Boxes & Bodies
Guitar Control Plates
Guitar Electronics Parts
Guitar Fretboards
Guitar Input Jacks
Guitar Knobs
Guitar Necks
Guitar Pickups
Guitar Resonator Cone & Cover
Guitar Strap Button
Guitar String Retainers
Guitar Strings
Guitar Tailpieces
Guitar Tools
Guitar Tuners
Made in the USA
MGB CBG Collection
MGB Deals
New Guitar Parts
Newest Products
Ready to Play
Sound Hole Covers
Trim Rings & Covers
Ukulele Guitar Parts
MGB Micro Pup 3/4 String Single Coil Flat Pickup
$10.00
These low-profile pickups are designed specifically for surface mounting on cigar box guitars. They eliminate the need for cutting a large hole in the box and slotting the neck. Simply mount on the surface of the box and run the wire through a small hole to connect with the rest of the electronics.
This pickup is rated at 3k, so it's nice and hot for guitar installations! Make sure the magnets face the strings.
Dimensions: 1.7" x .96" with a thickness of .23"
Covers not included, find covers here.
MGB Mini Box Bucker Pickup 4.0 | 3/4 String
$12.00
These low-profile pickups are designed specifically for surface mounting on cigar box guitars. They eliminate the need for cutting a large hole in the box and slotting the neck. Simply mount on the surface of the box and run the wire through a small hole to connect with the rest of the electronics. Make sure the magnets face the strings.
Dimensions are 1.75" wide, 1.65" tall and .23" thick.
Covers not included, find covers here.
Mini Box Bucker Mounting Ring or Covers not included
Traditional Strap Button | Black
$2.50
Traditional style strap button for mounting guitar straps. Can be installed anywhere on your guitar. Comes with felts and matching hardware.
Classic look
Matching hardware included
One felt per button
Also comes in Gold & Chrome
MGB Concert Ukulele Guitar Kit
from $37.50
Minimum box length is 8 inches. Includes 15 inch scale neck that is sanded and finished. Neck has hanger bolt and hardware for easy mounting on any box. Fretboards is Rosewood. Frets and fret board installed, includes bone nut. Four high quality enclosed tuners with hardware. Rosewood bridge with bone saddle and two filler plugs. Four labeled nylon strings.
Ukulele Kit Includes:
Neck w/hanger bolt & hardware
4 Enclosed Tuners (2 left & 2 right) & tuner hardware
Nylon strings (labeled)
Rosewood bridge w/bone saddle (two filler plugs)
Available with Chrome, Black or Gold tuners
Note: Box/body not included!
Check out the Deluxe Concert kit.
Watch This Video:
Watch This Video:
050
MGB Five Dolla Make It Holla Pickup | 3/4/6 String
$5.00
The perfect single coil pickup for those builds where cost is an issue. Don't let the low price fool you, this 4.5K pickup has lots of snap, check the video for a sound sample. The coil measures 2 1/2 inches long by 3/8 inches wide and 3/8 inches tall. You can select an optional cover or create your own. To install, cut a small slot in the top and install the pickup assembly. Hardware included. Connect to our Volume/Tone/Jack Harness and you have a great electronics package at a very reasonable price.
Quality Guitar Pickups from MGB Guitars & Parts.
4.5K Pickup
Single Coil Pickup Measures: 2-1/2" x 3/8" x 3/8"
Dovydas on a CBG w/ MGB Five Dolla Make it Holla Pickup:
Josh Barter on the MGB Classico Fat Bottom Guitar MGB Five Dolla Make it Holla Pickup:
Volume/Tone/Jack Harness no
$11.00
High quality 500K Volume & Tone pots. Premium jacked wire with heat shrink connections.
Premium jacked wire
Connections sealed with heat shrink
High quality 500K potentiometers
.047 mfd cap
Watch this video!
Watch this video!
Fret Wire Kit - 2.4 mm x 24 pieces
$6.00
22 piece nickel-silver medium fret wire kit ready to be installed into a slotted neck.
Nickel-silver
Medium fret wire
22 Piece
2.4mm
Complete dimension info in images
3-Pack Economy 500K Volume/Tone/Jack Harness
$11.00
Includes 500k volume pot and 500k tone pot with .047 mfd cap. Harness includes the ground wire for bridge and leads for connection to pickup or piezo. Mounting hardware included.
500k volume pot
500k tone pot
.047 mfd cap
Watch this video!
Traditional Strap Button | Chrome
$2.50
Traditional style strap button for mounting guitar straps. Can be installed anywhere on your guitar. Comes with felts and matching hardware.
Classic look
Matching hardware included
One felt per button
Also comes in Gold & Black
Reinforcement plate for bolt on necks
$2.75
For use on all MGB bolt on necks. This one inch by three inch 11 gauge steel plate provides additional rigidity to the connection between the neck and the top of the box. The elongated slots accepts 1/4 inch or 10mm hanger bolts.
MGB Seven Fitty Screamin Pickup | 3/4/6 String
$7.50
Looking for an economic pickup with some real power? This little single coil packs a lot of punch into a small package. Measuring 2 3/4 by 3/4 by 3/8, it's easy to install, cut a small slot in your lid, glue the pickup in the optional cover and mount with screws. Feel free to experiment. Connect to our Volume/Tone/Jack Harness and you have a great electronics package at a very reasonable price.
With your own mounting ideas. The pickup checks in at 9K and will provide a really big sound at a reasonable price. Suitable for 3,4 and 6 string applications.
9K Pickup
Single Coil Pickup Measures: 2-3/4" x 3/4" x 3/8"
Pickup Audio Sample: MGB Seven Fitty Screamin Pickup Audio Sample on CBG
Quality Guitar Pickups from MGB Guitars & Parts.
Chrome Tuner | Left Single or 10 Pack
from $2.75
Standard peg style tuning key in chrome designed for any type of guitar. Reliable, no frills design. 16 to 1 ratio. Hardware included. Save 20% by buying 10 pack.
Fits .6 inch thick headstock
Get our 11MM drill bit sized perfectly for MGB tuners.
String Action Ruler
$4.00
Quick and precise measurements.
Made from durable stainless steel.
Get both inch and millimeter measurements from same ruler
Can be used on any stringed instrument.
One of the most important tools you can have when it comes to setting up your guitars for playing. The setup can make all the difference between a "good" guitar and "bad" guitar. Get precise measurements for string action, nut height, fret slot depth, and string to pole distance.
Jack Plate
$2.00
1.3 inches by 1.3 inches, with a .37 inch hole. Hardware included
Available in Chrome or Black
Antique Brass Finish Tuner | Right
$3.50
Antique brass peg style designed for any type of guitar. Reliable, no frills design. 16 to 1 ratio. Hardware included.
Fits .6 inch thick headstock
Get our 11MM drill bit sized perfectly for MGB tuners.
Faux Striker Plate Tailpiece
$4.50
Replica tailpiece.
Plated Steel Chrome or Black Chrome
For 3 and 4 string installations
Includes hardware
Includes strap pin pocket
3-Pack Economy 250K Volume/Tone/Jack Harness
$9.50
Includes 250k volume pot and 250k tone pot with .047 mfd cap. Harness includes the ground wire for bridge and leads for connection to pickup or piezo. Mounting hardware included.
250k volume pot
250k tone pot
.047 mfd cap
Watch this video!
MGB Rosewood Bridge w/Bone | 3/4 String
$3.50
Excellent floating bridge for 3 or 4 string applications. Light sanding required. Overall height with nut is .375".
Dimensions: 2" x 1.25" x .25"
Rosewood & Bone Pre-assembled
Antique Brass Finish Tuner | Left
$3.50
Antique brass peg designed for any type of guitar. Reliable, no frills design. 16 to 1 ratio. Hardware included.
Fits .6 inch thick headstock
Get our 11MM drill bit sized perfectly for MGB tuners.
Rosewood Fret Board | 25.5" Scale
$12.50
Beautiful High Quality Rosewood
Check the length of the fretboard at the 12th fret down from nut end, it should measure 12 3/4 inches. Trim at nut end as needed
0.25 inches thick
18.5 inches long
1.63 inches wide at the narrow end
2.06 inches wide at the wide end
25.5 inch scale length
Suitable for 3 or 4 or 6 string applications
Perfect for builders who want to build their necks but want a precisely made finger board. Board is .25 inches thick, 18.5 inches long, 1.63 inches wide at the narrow end and 2.06 inches wide at the wide end. Board is set for 25.5 inch scale and is suitable for 3 and 4 string applications.
Made of genuine rosewood, all boards were hand selected for premium color and grain pattern.
MGB Tenor Ukulele Guitar Kit
from $42.50
Minimum box length is 9 inches. Includes 17 inch scale neck that is sanded and finished. Neck has hanger bolt and hardware for easy mounting on any box. Frets and fret board installed, includes bone nut. Four high quality enclosed tuners with hardware. Rosewood bridge with bone saddle and two filler plugs. Four labeled nylon strings.
Ukulele Kit Includes:
Neck w/hanger bolt & hardware
4 Enclosed Tuners (2 left & 2 right) & tuner hardware
Nylon strings (labeled)
Rosewood bridge w/bone saddle (two filler plugs)
Note: Box/body not included!
Watch This Video:
Watch This Video:
MGB Mini Box Bucker Cover Aluminum Stamped| 3/4 String
$4.00
Designed to work with our 3/4 String Mini Box Bucker Pickups.
Aluminum stamped
Satin Finish
Includes chrome hardware
Compatible with:
MGB Mini Box Bucker Pickup 2.0 | 3/4 String
MGB Mini Box Bucker Pickup 4.0 | 3/4 String
MGB Mini Box Bucker Cover Aluminum Stamped Plated Black | 3/4 String
$4.00
Designed to work with our 3/4 String Mini Box Bucker Pickups.
Aluminum stamped
Plated black finish
Includes black hardware
Compatible with:
MGB Mini Box Bucker Pickup 2.0 | 3/4 String
MGB Mini Box Bucker Pickup 4.0 | 3/4 String
Cigar Box Guitar Gig Bag | Large Plain
$28.00
Designed specifically with cigar box guitars in mind. Features a large pocket to hold accessories, carrying handle, backpack straps, and heavy-duty construction to ensure this bag will last. Dimensions in photos!
Designed specifically for cigar box guitars
Backpack straps & carrying handle
Heavy-duty construction
VIDEO: Cigar Box Guitar Gig Bag
MGB Baritone Ukulele Guitar Kit
from $42.50
Includes 20 inch scale neck that is sanded and finished. Neck has hanger bolt and hardware for easy mounting on any box. Fretboard is Rosewood. Frets and fret board installed, includes bone nut. Four high quality enclosed tuners with hardware. Rosewood bridge with bone saddle and two filler plugs. Four labeled nylon strings.
Baritone Ukulele Kit Includes:
Neck w/hanger bolt & hardware
4 Enclosed Tuners (2 left & 2 right) & tuner hardware
Nylon strings (labeled)
Rosewood bridge w/bone saddle (two filler plugs)
Note: Box/body not included!
Watch This Video:
Watch This Video:
Traditional Strap Button | Gold
$2.50
Traditional style strap button for mounting guitar straps. Can be installed anywhere on your guitar. Comes with felts and matching hardware.
Classic look
Matching hardware included
One felt per button
Also comes in Black & Chrome
Black Domed Top Knurl Knob
$2.00
Black Domed Top Knurl Knob
Extremely common knob thats often found on more modern guitars.
Perfect for any style guitar.
Black finish
Quality guitar hardware from MGB Guitars.
Piezo w/16" Lead & Jack | 35mm / 1-3/8" Disc
$4.00
Heavy duty industrial grade piezo disc. Defined solder pads makes soldering easier and minimizes damages. This has been our favorite piezo for many years and used on a large quantity of our builds.
35mm discs / 1-38" diameter
16" Lead
Pre-installed Jack w/ Hardware
Chrome Domed Top Knurl Knob
$2.00
Chrome Domed Top Knurl Knob
Extremely common knob thats often found on more modern guitars.
Perfect for any style guitar.
Chrome finish
Quality guitar hardware from MGB Guitars.
3-String Bridge | Chrome
$9.50
This is a chrome electric guitar-style hard-tail bridge, but made for 3-string cigar box guitars! It took us a long time to find a source for these, but now we got 'em! These bridges are "top-loading" style, which means that the strings are fed through the back plate of the bridge, then up and over the saddles. No drilling through the instrument/box is required!
The dimensions of these bridges are 1 31/32" (50mm) wide, 1 5/8" (41mm) deep and about 9/16" (14mm) tall. The spacing between strings is 12mm (0.472", just under 1/2") with total distance from string 1 to string 3 being 24mm or 0.945" - just under 1 inch. Each one is mounted securely by four screws, and a small allen wrench is also included for adjusting the small set screws that control string action height. See the listing photo with measurements (in millimeters) for more size specs. Basically these get used like any bottom-loading electric guitar bridge (like those on telecasters and such). You screw it to the top of the instrument, and the strings come up through holes in the instrument body (usually with a ferrule of some sort on the back to hold the string ball), and then up and over the individual string saddles. The saddles can be adjusted by means of a screw at the back of the bridge to get the intonation just right, and small set screws at the front of each saddle let you set the string action height. Overall it is fairly straightforward.
Perfect for 3-string cigar box guitars
Sturdy metal construction
Bright mirror-like chrome finish
Individually adjustable string saddles
Chrome mounting screws and allen wrench included
Top-loading
Easy Fretter Pre-loaded fretboard
$15.00
The Easy Fretter is a pre loaded and ready to go fretboard that is sized to fit the 2 inch material found at the big box stores. It is made from black composite material.
Ultra smooth satin finished composite fretboard
25 1/2 inch scale
19 3/8 inches long
1 1/2 inches wide
.24 inch thick
Available in Chromatic and Diatonic
21 frets on Chromatic and 13 on Diatonic
Face fret markers on Chromatic
Zero fret installed
Zero fret is .020 taller than other frets
Rosewood string spacer included for either 3 or 4 strings
Use woodworking glue to secure the fretboard to the neck. Strongly encourage using a clamping caul to help keep the neck and fret board straight. The string spacers mount at the end to keep the strings aligned.
