Search results for "bass short=strings":

Our 2nd generation humbucker pickup specifically designed for use in cigar box guitars & homemade instruments! The best just got better, we listened to our customers and made some improvements. The cover and frame are now rosewood, we have also added a black fiber baseplate to add strength and style. We still use Alnico 5 magnets which add more focus and enhanced dynamics. Enamel-coated magnet wire delivers warm vintage-style tones. These pickups available in 3 and 4 string configuration measure 8.8k. This new model also includes wiring for split coils for those wanting to separate the coils. Another quality guitar pickup from MGB Guitars. Black wire is hot, green/braid is ground and red/white are where the coils connect.   Note: Also available with our push pull pot harness. This allows you to easily move from a single coil pickup to a humbucker by simply pushing or pulling the tone knob. Soldered sealed and tested. This is our favorite setup at MGB Guitars. Quality Guitar Pickup by MGB Guitars Specifically designed for cigar box guitars & homemade instruments.  Rosewood cover and trim ring No noise sound Alnico 5 magnets Rosewood / Carbon Fiber Construction Watch Video: Audio Sample of MGB Box Bucker Gen 2

Quality Crafted Guitar Neck | Easy to Install 25.5 inch Scale Suitable for 6 string builds Head stock is pre-drilled for tuners 22 frets installed and nicely finished Truss rod installed 0.6" thick headstock 1 5/8" width at nut 2" width at 12th fret Overall length 25 3/4" Top and side fret markers are included Plastic slotted Nut Hanger bolt is installed and hardware is included 1/8 inch fret board shim is included as well as thin back angle shim Box should be 10 inches in length Maple construction with rosewood fingerboard Bridge placement template The perfect neck for your next six string build. The neck is completely finished and ready to go. Simply reinforce your box and bolt the neck on. The finger board is radiused just like high end guitar necks. Solid maple construction with a rosewood fret board set for 25.5  inch scale. The neck is meticulously sanded and the maple portion has a spray finish. The rosewood fret board is unfinished. Watch This Video:

MGB kits are made for people with a fundamental knowledge of building stringed instruments. There are many videos available on our Youtube Channel that can provide help. We are also available by phone to help. MGB kits are made to order and can take a few extra days to prepare. They may ship in a few days or could take up to a week. Kit includes everything needed to complete this attractive 3/4 string instrument. Available with black hardware. Included are: 11 1/2” x 8 1/4" x 1 3/4" Plascencia box that is fully machined and ready for assembly. Box is distressed and has several coats of finish. 24 inch scale MGB Easy Neck  Rosewood and Okume fretted neck  with fin style face markers. The neck is predrilled for 3 or 4 tuners. Nut is pre slotted but may need adjustment. Neck reinforcement plate is included. MGB black smoothie pickup with 500k harness soldered tested and ready to install.  Black tuners, bridge, strap pins, surface jack plate. Pack of .013, .017, .026 or .013, .017, .026 and .036 strings. Use a 10mm deep well socket for the neck hanger bolt.  Assembly available HERE Remember the price includes free packing and shipping, a $25 value.  

6-string Gold hard-tail bridge perfect for electric guitars. Top-loading. Sturdy metal construction, bright mirror-like gold finish. Gold mounting screws and allen wrench included. Individually adjustable string saddles allow exact intonation adjustments 6-string Gold hard-tail bridge perfect for electric guitars. Top-loading. Sturdy metal construction, bright mirror-like gold finish. Gold mounting screws and allen wrench included. Individually adjustable string saddles allow exact intonation adjustments Also available in Black and Chrome finishes. Easy Bridge Placement Template HERE  

Set includes 4 30 inch strings for baritone ukuleles. Strings are numbered 1-4 and sizes included are .026 and .031 in nylon and .029 and .037 in metal wrapped strings. Tuning is dgbe.

6-string Black hard-tail bridge perfect for electric guitars. Top-loading. Sturdy metal construction, bright mirror-like gold finish. Black mounting screws and allen wrench included. Individually adjustable string saddles allow exact intonation adjustments 6-string Black hard-tail bridge perfect for electric guitars. Top-loading. Sturdy metal construction, bright mirror-like gold finish. Black mounting screws and allen wrench included. Individually adjustable string saddles allow exact intonation adjustments Also available in Gold and Chrome finishes. Easy Bridge Placement Template HERE 

2-pack of neck trim short, for 1-1/2" necks. Hardware included. Made of birch plywood.

MGB kits are made for people with a fundamental knowledge of building stringed instruments. There are many videos available on our Youtube Channel that can provide help. We are also available by phone to help. MGB kits are made to order and can take a few extra days to prepare. They may ship in a few days or could take up to a week.Kit includes everything needed to complete this attractive 3/4 string instrument. Available with black hardware. Included are: 10” x 7" x 2 1/2" Camacho box that is fully machined and ready for assembly. 25.5 inch scale MGB Super Neck  Rosewood and Maple fretted neck with face fret markers. The neck utilizes a zero fret and is predrilled for 3 or 4 tuners. Neck reinforcement plate is included. MGB BK 2000 quad rail pickup with 500k push pull pot harness soldered tested and ready to install. This allows switching between single coil and humbucker operation.  Black or Chrome tuners, bridge, strap pins, surface jack plate. Pack of .013, .017, .026 or .013, .017, .026 and .036 strings. Use a 10mm deep well socket for tuners and 7/16' for the neck hanger bolt.  Assembly available HERE Remember the price includes free packing and shipping, a $25 value.

Build your own 50s retro cbg using the new Zoomy box from MGB. Easy to assemble and totally customizable. Can be used for 3,4 or 6 string guitars. Made primarily for use with bolt on necks and works perfectly with MGB Easy Necks, Super Necks and the Super Sixer Neck. Since the box is not symmetrical around the center line, it is recommended that you use a neck template to help locate the bridge.   Can also be used for a U Bass.  The top can be easily modified to accept your favorite pickup.  There is no limit on what can be used on the top surface; paint, stain, laminates, veneers or just about any type of art you like. Amazon sells a wide selection of colorful pick guard materials that are the perfect size. We suggest using contact cement to secure the laminate.  Secure the top plate to the body ring using the screws provided. Make sure the body is pressed into the ring well resting on the flange. Install the neck and electronics then secure the back plate in place.  Kit includes: Machined and ready to finish top and bottom pine plates.  Predrilled oak neck bolt block.  Formed and predrilled aluminum body ring. Hardware and extra long 1/4 20 hanger bolt included.  Check HERE for Zoomys that are half assembled using one of our preselected laminates. Remember the price includes free packing and shipping, a $25 value.

MGB kits are made for people with a fundamental knowledge of building stringed instruments. There are many videos available on our Youtube Channel that can provide help. We are also available by phone to help. MGB kits are made to order and can take a few extra days to prepare. They may ship in a few days or could take up to a week. An original design by MGB. Included are: 12" x 6  3/4" x 2 1/2" Atabey box that is fully machined, reinforced and ready for assembly. 25 1/2 inch scale Super Neck (our best cbg neck) Rosewood and Okume fretted neck predrilled for 3/4 tuners. Neck reinforcement plate is included. Uses a zero fret and string spacer is installed.  MGB Hot Tuna mini humbucker pickup with harness which includes push pull pot to select single coil or humbucker.  Mounting hardware and knobs. Black Tuners, bridge, strap pins, jack plate and back cover. Includes of .009, .013, .017, .026 .036 and .046 strings. Use a 7/16 inch deep well socket for the neck hanger bolt and a 10 mm socket or wrench to tighten tuner ferules.  Assembly available HERE Remember the price includes free packing and shipping, a $25 value.  

Quick and precise measurements. Made from durable stainless steel. Get both inch and millimeter measurements from same ruler Can be used on any stringed instrument. One of the most important tools you can have when it comes to setting up your guitars for playing. The setup can make all the difference between a "good" guitar and "bad" guitar. Get precise measurements for string action, nut height, fret slot depth, and string to pole distance.

Standard peg style tuning key in chrome designed for any type of guitar. Reliable, no frills design. 16 to 1 ratio. Hardware included. Save 20% by buying 10 pack. Fits .6 inch thick headstock Get our 11MM drill bit sized perfectly for MGB tuners.

6-string Chrome hard-tail bridge perfect for electric guitars. Top-loading. Sturdy metal construction, bright mirror-like gold finish. Chrome mounting screws and allen wrench included. Individually adjustable string saddles allow exact intonation adjustments 6-string Chrome hard-tail bridge perfect for electric guitars. Top-loading. Sturdy metal construction, bright mirror-like gold finish. Chrome mounting screws and allen wrench included. Individually adjustable string saddles allow exact intonation adjustments Also available in Gold and Black finishes. Easy Bridge Placement Template HERE  

Traditional 3 string bridges have a narrow 12 mm spacing between strings. This places the strings close together and can can be challenging for players with bigger hands and fingers. The new MGB XL bridge solves that problem providing a bridge with ample spacing. The spacing between strings on the new XL Bridge is 16mm (0.625", just under 5/8") with total distance from string 1 to string 3 being 32mm or 1.25 inches which works perfectly with a 1 1/2 inch neck. This bridge is a "top-loading" style, which means that the strings are fed through the back plate of the bridge, then up and over the saddles. No drilling through the instrument/box is required  Each one is mounted securely by four screws, and a small hex wrench is also included for adjusting the small set screws that control string action height. The saddles can be adjusted by means of a screw at the back of the bridge to get the intonation just right, and small set screws at the front of each saddle let you set the string action height.  Perfect for 3-string cigar box guitars Sturdy metal construction Chrome, Black, Gold or Antique Brass finish Individually adjustable string saddles Mounting screws and wrench included Top-loading  Find XL Bridge shim HERE Easy Bridge Placement Template HERE E-System Bridge Locator Template HERE

Quality guitar hardware from MGB Guitars. Perfect for homemade instruments. Reminiscent of the Frisco bridge that spans the Mississippi at Memphis. At .6 inches this bridge is taller than most but can be cut or sanded to the right height.  String location notches are provided along the top edge. 3 string slots are spaced .5 inches apart and 4 string are .4 inches. Make sure to file the slots to provide a back angle falling off toward the tailpiece.  2 3/4 Inches wide and .6 inch tall. Easily sanded to get the right height. Light sanding required, suitable for staining or painting