Search results for "bass super neck":
Products
Mini Bass Kit with Box
$150.00
MGB kits are made for people with a fundamental knowledge of building stringed instruments. There are many videos available on our Youtube Channel that can provide help. We are also available by phone to help.
MGB kits are made to order and can take a few extra days to prepare. They may ship in a few days or could take up to a week.
This kit does include a box. This kit includes all the items needed to build a 20 (see note below on intonation) inch scale electric U-Bass. The neck is made of Okume and the fret board and bridge are made of Walnut. The boxes are made from Sapele and well reinforced for this application. Polyurethane strings are provided as well as a bone nut that is fitted to the strings. The neck includes a preinstalled hanger bolt for mounting to the box.
The heavy duty tuners are made specifically for this type of instrument. Unlike other tuners you will need to disassemble the tuner to install it in head stock. Remove the screw, gear and axle before installing the tuner body. Reassemble and and add washer and ferrule. Tighten with a 15mm wrench. Normal string winders will not work and we suggest you use our 24010 winder which will accommodate the oversized knobs on these tuners.
Due to the mass and size of the strings we have found that a scale length of 20.3 inches works better for intonation. The strings are anchored on the bridge using knots on the inside of the box. The bridge can be glued to the box however we prefer using screws and finish washers.
The electronics package includes a compensated piezo pickup, preamp/equalizer, tuner and battery box. Openings for the preamp and battery box are included. The battery box uses two 2032 (not included) round batteries which are installed positive side up. A plug will need to be installed in the jack for the tuner to operate. Tune to EADG.
Special note: As the strings are soft and the leading edge of the nut is quite sharp, oftentimes the strings will bind on the nut and the gears will grind till they fail. The solution is to lift the strings over the nut as you tighten the tuners
If you need help feel free to call Eric at 727 212 7221.
Assembly available HERE
Check online for videos on installing U-Bass strings.
U-Bass Tuner Set of four
$22.00
Special note: As the strings are soft and the leading edge of the nut is quite sharp, oftentimes the strings will bind on the nut and the gears will grind till they fail. The solution is to lift the strings over the nut as you tighten the tuners
Easy to install. Includes two right and two lefts. Fits headstocks that are .500 inch thick. Fits hole that is .525 inch.
Easy Neck Okume & Maple Fretted Neck | 24 inch Scale - Buy One Get One HALF OFF
$71.25
Quality Crafted Guitar Neck | Easy to Install
24 inch Scale
Perfect for boxes that are 9" long
Suitable for 3,4 and 5 string builds
9/16" thick headstock
Nut is installed but not slotted
1 3/8" width at nut
1 1/2" width at 12th fret
Fretboard length is 17.5"
Overhang is 1 1/8"
Overall length 23 3/4"
Face fret markers are included
Bone Nut
Hanger bolt and hardware included
Okume construction with Maple Fretboard
Headstock Tuner template is available
The perfect neck for your next build. The Easy Neck is completely finished and ready to go. Simply reinforce your box and bolt the neck on. Solid Okume construction with a Maple fret board set for 24 inch scale. The neck is meticulously sanded and the Okume portion has a spray finish. The Maple fret board is unfinished. Headstock has a male veneer layer showing. The Easy Neck is similar to the Super Neck and installation techniques are the same so the following video applies.
Bridge Placement Template
Easy Neck Okume & Maple Fretted Neck | 24 inch Scale
$47.50
Quality Crafted Guitar Neck | Easy to Install
24 inch Scale
Perfect for boxes that are 9" long
Suitable for 3,4 and 5 string builds
9/16" thick headstock
Nut is installed but not slotted
1 3/8" width at nut
1 1/2" width at 12th fret
Fretboard length is 17.5"
Overhang is 1 1/8"
Overall length 23 3/4"
Face fret markers are included
Bone Nut
Hanger bolt and hardware included
Okume construction with Maple Fretboard
Headstock Tuner template is available
The perfect neck for your next build. The Easy Neck is completely finished and ready to go. Simply reinforce your box and bolt the neck on. Solid Okume construction with a Maple fret board set for 24 inch scale. The neck is meticulously sanded and the Okume portion has a spray finish. The Maple fret board is unfinished. Headstock has a male veneer layer showing. The Easy Neck is similar to the Super Neck and installation techniques are the same so the following video applies.
Bridge Placement Template
"Shorty" 3 String Neck | 20 Inch Scale
from $45.00
Quality Crafted Guitar/Short Scale Neck | Install Ready
Easy to Install
20 Inch Scale 19 Frets
3 String Ready
.46 inch headstock, works best with style Ukulele tuners, included Chrome, Black or Gold
Sanded, Finished and ready to use
Overall Length is 19.125”
Neck Spacer is included
Nut and Tuners Included, Some Assembly Required
Okume Construction with Rosewood Fingerboard
Works well with MGB XL bridges
Ready to go out of the box. Solid hardwood construction with a rosewood fret board. The neck is finish sanded and has a spray oil finish. The Rosewood fret board is unfinished. The overall length is 16 inches and the fret board overhangs the neck by 2-3/4 inches. The neck is 1.6 inches wide at the nut and 2 inches wide at other end. The nut slots are filed but my need additional adjustment during set up. Mounting is easy using the hanger style bolt.
U-Bass Template
$10.00
Makes bridge placement a breeze
This template is specifically made for use with the U-Bass kit. Provides a the right location for the bridge. Always check to make sure the scale length is 20 5/16" at the bottom of the saddle where the lowest (G) string rests.
Tele neck 6 string
$75.00
MGB presents our new Tele style necks. These professional grade necks are perfect for your next 6 string build. Depending on your personal preferences, the frets may need additional treatment and fine tuning.
North American Maple Neck
Optional roasted Maple available
Satin poly finish
Rosewood Fretboard
22 Frets 18 inch radius 25.5 inch scale length
Pre slotted plastic nut installed
Face and side fret markers
Truss rod uses 4mm hex wrench included
Predrilled (10mm) for 6 inline tuners
Marking templates included
Digital file of the pocket shape is available no charge
Four String Bass Bridge | Chrome or Black
from $12.00
4 string bridge for bass guitar
Chrome or black finish
19mm string spacing on chrome 20mm on black
Easy Bridge Placement Template HERE
K-Nine Bass Flat Pup Covers
from $4.00
These covers are made specifically for the K-Nine bass pickups. they measure 3.65" by 2.0" by .32". Hardware included.
Shim available here.
Bass Tuner | Right Chrome or Black
$5.75
Closed chrome bass guitar tuner
One right side tuner
Chrome or black finish
Fits .6 inch thick headstock
U Bass Strings Black or Ivory
$15.00
Polyurethane strings for U Bass instruments. Strings measure .196, .165, .117 and .093 and 32 inches long.
Bass Jack | Chrome
$5.00
Input jack for bass guitar
Made to fit 1/4 inch instrument cable
Chrome finish
Bass Tuner Open | Left Chrome or Black
$5.75
Open chrome bass guitar tuner
One left side tuner
Chrome or black finish
Fits .6 inch thick headstock
Bass Tuner | Left Chrome or Black
$5.75
Closed chrome bass guitar tuner
One left side tuner
Chrome or Black finish
Fits .6 inch thick headstock
Bass Tuner Open | Right Chrome or Black
$5.75
Open chrome bass guitar tuner
One right side tuner
Chrome or black finish
Fits .6 inch thick headstock