Search results for "bass super neck":
Products
Easy Neck Diatonic 24 inch Scale
$45.00
Quality Crafted Guitar Neck | Easy to Install
24 inch Scale
Perfect for boxes that are 9" long
Suitable for 3,4 and 5 string builds
9/16" thick headstock
Nut is installed but not slotted
1 3/8" width at nut
1 1/2" width at 12th fret
Fretboard length is 17.5"
Overhang is 1 1/8"
Overall length 23 3/4"
Face fret markers are included
Fret board shim included
Bone Nut
Hanger bolt and hardware included Use 10MM socket or wrench.
Okume construction with rosewood fingerboard
Headstock Tuner template is available
The perfect neck for your next build. The Easy Neck is completely finished and ready to go. Simply reinforce your box and bolt the neck on. Solid Okume construction with a rosewood fret board set for 24 inch scale. The neck is meticulously sanded and the Okume portion has a spray finish. The rosewood fret board is unfinished. The Easy Neck is similar to the Super Neck and installation techniques are the same so the following video applies.
Bridge placement template
Watch This Video:
Lucky 13 Flat Pup with or without harness.
from $15.00
In some builds it is preferred to place the pickup under the lid of the box,
this practice is often referred to as "ghosting". Many builders have had good success using the MGB Mini Box Buckers for these applications. MGB is proud to introduce our new Lucky 13 flat pup designed for ghosting.
By adding more wire and strengthening the magnetic field we have a solid solution. These new pickups measure 13k ohms plus. We have found in testing that the pickups work well when the distance from the pickup to the strings is .5". Make sure the magnets face the strings.
Measuring 2.56" by 1.6" and .3" thick, these pickups can be used on 3,4 and 6 string builds. Works with our 6 string Boxbucker covers.
Also available with harness installed and tested.
View all available covers here.
Super Sixer bridge placement template
$6.00
This template is helpful for locating the bridge when using a Super Sixer bolt on neck.
Always check to confirm 25.5 inch distance from the fret side edge of the nut to front the edge of saddle.
Oliva 135 Year Anniversary Box
from $150.00
MGB kits are made for people with a fundamental knowledge of building stringed instruments. There are many videos available on our Youtube Channel that can provide help. We are also available by phone to help.
MGB kits are made to order and can take a few extra days to prepare. They may ship in a few days or could take up to a week.
Kit includes everything needed to complete this attractive 3/4 string instrument. Available with antique brass hardware.
Included are:
13” x 9" x 2 1/2" box that is fully machined and ready for assembly.
25 1/2 inch scale MGB Super Neck (our best neck) Rosewood and Maple fretted neck with face fret markers. The neck utilizes a zero fret and is predrilled for 3 or 4 tuners. Mounting hardware is included.
MGB Hot Tuna pickup with 500k push pull pot harness soldered tested and ready to install. This allows switching between single coil and humbucker operation.
Antique brass tuners, bridge, strap pins, surface jack plate and protective corners.
Includes a pack of .013, .017, .026 or .013, .017, .026 and .036 strings.
Use a 10mm deep well socket for tuners and 7/16" for the neck hanger bolt.
This can purchased as a Ready To Build kit, It can also be purchased assembled, tested and tuned in the Ready To Play selection.
Assembly available HERE
Remember the price includes free packing and shipping, a $25 value.
License Plate Guitar Kit
$125.00
MGB kits are made for people with a fundamental knowledge of building stringed instruments. There are many videos available on our Youtube Channel that can provide help. We are also available by phone to help.
MGB kits are made to order and can take a few extra days to prepare. They may ship in a few days or could take up to a week.
Easy to assemble kit includes everything needed to build a 3 or 4 string license plate guitar, using your favorite 6x12 inch license plate.
Kit includes:
Reinforced Sapele body specifically made for license plate builds. The body is reinforced and machined with necessary mounting holes for adding components.
Kit includes Deluxe Easy Neck.
Lucky 13 pickup with harness ready to install. Pickup has double sided tape and can be mounted on the back of the license plate near the neck.
Hardware includes tuners, strings, stainless steel tailpiece, knobs, strap pins and screws.
A rosewood bridge that may need to be modified to fit around the letters to obtain the preferred action height.
Assembly is easy:
Mount harness/jack assembly to box. Feed ground wire through small hole where tail piece mounts.
Affix pickup to back side of plate.
Install tuners on headstock, use a small amount of super glue to secure the Rosewood string spacer on at the end of the fretboard just beyond the zero fret.
Mount neck on the body using reinforcement plate and hardware.
Mount plate to box using screws.
Install the tailpiece.
Install strings and only tighten lightly.
Locate the bridge where the fret saddle on the bridge is 24 inches from the nut. Modify the bridge to get the right action height.
Assembly available HERE
Remember the price includes free packing and shipping, a $25 value.
Single Shot Bass Bridge | Chrome or Black
$15.00
Four pack of single shot bridges for bass guitar
Chrome or black finish
Allows flexible string spacing
Tailpiece Maple or Rosewood 3 or 4 string
from $3.00
Perfect for securing strings to the end of the box.
Available in Rosewood or Maple
Approximately 1/4 inch thick
Available in 3 or 4 string
Hardware included
Bass Bridge with Piezo
$20.00
A perfect bridge and piezo combination for four string bass builds. Includes walnut bridge and compensated bar style piezo with four segments. Bridge measures 5.06 by .8 by .35 inches. Overall height of bridge and piezo is .53 inches. Recommended string spacing is .7 inches. Must use preamp with this piezo.
Tailpiece
Easy Box LP Enclosure Gen 2
$30.00
MGB Guitars is proud to introduce their Easy Box LP enclosure. The box is built using purfling and braces to create an incredibly strong and rigid structure. Made to fit most standard modern 6" by 12" license plates. Opening measures 6 inches by 12 inches.
Measuring 7 1/4 inches by 13 1/8 inches and 1 7/8 thick the box is made from thin ply with a top veneer of Sapele Box is finished with a semi gloss oil product Mounting holes are provided for the volume and tone control. This box works perfectly with the Super Neck and Easy Neck. With a Super Neck the bridge or saddle will be roughly 4 1/4 inches from the left edge of the plate. Ghosting any MGB Flat pup on the back side of the plate provides solid output. Secure with double sided tap, hot glue or epoxy, make sure to have the magnet face the strings.
This box provides a perfect canvass for creating your own piece of musical art. Search EBAY for a cool vanity plate.
Roughly 7 1/4 inches by 13 1/8 inches
Approximately 1 7/8 inches deep
The box head wall is a full 5/8 thick
Multi-ply construction with Sapele veneer
Plate mounting hardware included
.
Mini Bass Hardware/Electronics Kit
$25.00
Complete kit includes:
Walnut bridge
Equalizer and battery housing with cable
Piezo bridge
Templates with screws
Extra Thin- Mini Box Bucker or Micro Pup RSG
from $24.00
The RSG (Ready Set Go) pickup is a complete system that includes a pickup, harness and cover ready to install. Uses an MGB 4.0 Mini Box Bucker pickup which is soldered to a 500K economy harness, or a 3.0 Micro Pup and 250K harness. The pickup is secured in the cover. This pickup can be mounted anywhere between the neck and the bridge to provide excellent sound. These new wood covers are less than .25 inches thick and work well with MGBs Easy Necks, Super Necks and Easy Fretter fret boards with no need for addition spacing.
Assembly is quick and easy, simply drill a one inch hole at the pickup location and feed the jack and pots through the hole, secure the pickup with the provided screws then mount the pots and the jack.
Each pickup is fully tested to insure optimum performance.
Four String Wraparound Bridge
$14.50
Chrome four string wrap around bridge suitable for cbg builds. Saddles are spaced .6 inches apart and string width at bridge is 1.8 inches. Requires a larger than standard neck, one that is close to 2 inches and the box end.
These bridges are taller than standard bridges requiring the the stagger between the box face and fret height to be near .5 inches. The mounting post allow for fine adjustment to get the action height correct.
Template is included for laying out mounting hole locations. Simply line up the template on the centerline an scale length. Mark the holes and drill with a 12mm drill bit. You can use a smaller bit and file to size. Add backer to make sure top is close to .750 inches thick at the hole position.