Search results for "mini box bucker pickup":

These low-profile pickups are designed specifically for surface mounting on cigar box guitars. They eliminate the need for cutting a large hole in the box and slotting the neck. Simply mount on the surface of the box and run the wire through a small hole to connect with the rest of the electronics. Make sure the magnets face the strings.   Dimensions are 1.75" wide, 1.65" tall and .23" thick. Covers not included, find covers here. Cover template HERE. Mini Box Bucker Mounting Ring or Covers not included

The RSG pickup is a complete system that includes a pickup, harness and cover ready to install. Uses an MGB 4.0 Mini Box Bucker pickup which is soldered to a 500K economy harness, or a 3.0 Micro Pup and 250K harness. The pickup is secured into a cover. This pickup can be mounted anywhere between the neck and the bridge to provide excellent sound. The cover is .3 inches thick so make sure there is a .3 difference between the top of the frets and the top of the box. Assembly is quick and easy, simply drill a one inch hole at the pickup location and feed the jack and pots through the hole, secure the pickup with the provided screws then mount the pots and the jack. The RSG pickups are available in four popular finishes including shiny aluminum, black, gold and antique brass. Each pickup is fully tested to insure optimum performance. 

These low-profile pickups are designed specifically for surface mounting on cigar box guitars. They eliminate the need for cutting a large hole in the box and slotting the neck. Simply mount on the surface of the box and run the wire through a small hole to connect with the rest of the electronics. There are available in two versions; one is rated at 2k and is perfect for as a neck pickup, the other is 4K and perfect for a bridge pickup. Dimensions are 1.75" wide, 1.65" tall and .23" thick. Make sure the magnets face the strings.   Covers not included, find covers here.     Mini Box Bucker Mounting Ring or Covers not included

These low-profile pickups are designed specifically for surface mounting on cigar box guitars. They eliminate the need for cutting a large hole in the box and slotting the neck. Simply mount on the surface of the box and run the wire through a small hole to connect with the rest of the electronics. Dimensions are 1.75" wide, 1.65" tall and .23" thick. Looking for covers? Click HERE for a wide variety of pickup covers. Mini Box Bucker Mounting Ring or Covers not included

The RSG (Ready Set Go) pickup is a complete system that includes a pickup, harness and cover ready to install. Uses an MGB 4.0 Mini Box Bucker pickup which is soldered to a 500K economy harness, or a 3.0 Micro Pup and 250K harness. The pickup is secured in the cover. This pickup can be mounted anywhere between the neck and the bridge to provide excellent sound. These new wood covers are less than .25  inches thick and work well with MGBs Easy Necks, Super Necks and Easy Fretter fret boards with no need for addition spacing. Assembly is quick and easy, simply drill a one inch hole at the pickup location and feed the jack and pots through the hole, secure the pickup with the provided screws then mount the pots and the jack.  Each pickup is fully tested to insure optimum performance. 

These low-profile pickups are designed specifically for surface mounting on cigar box guitars. They eliminate the need for cutting a large hole in the box and slotting the neck. Simply mount on the surface of the box and run the wire through a small hole to connect with the rest of the electronics. 8.8k Pickup. Dimensions are 2.5" wide, 1.65" tall and .23" thick. Covers not included, find  6 string covers here. Cover template here.

Designed to work with our 3/4 String Mini Box Bucker Pickups. Aluminum stamped Plated gold finish Includes gold hardware Compatible with: MGB Mini Box Bucker Pickup 4.0 | 3/4 String Shim available here.

Our 2nd generation humbucker pickup specifically designed for use in cigar box guitars & homemade instruments! The best just got better, we listened to our customers and made some improvements. The cover and frame are now rosewood, we have also added a black fiber baseplate to add strength and style. We still use Alnico 5 magnets which add more focus and enhanced dynamics. Enamel-coated magnet wire delivers warm vintage-style tones. These pickups available in 3 and 4 string configuration measure 8.8k. This new model also includes wiring for split coils for those wanting to separate the coils. Another quality guitar pickup from MGB Guitars. Black wire is hot, green/braid is ground and red/white are where the coils connect.   Note: Also available with our push pull pot harness. This allows you to easily move from a single coil pickup to a humbucker by simply pushing or pulling the tone knob. Soldered sealed and tested. This is our favorite setup at MGB Guitars. Quality Guitar Pickup by MGB Guitars Specifically designed for cigar box guitars & homemade instruments.  Rosewood cover and trim ring No noise sound Alnico 5 magnets Rosewood / Carbon Fiber Construction Watch Video: Audio Sample of MGB Box Bucker Gen 2

  Designed to work with our 6 String Mini Box Bucker pickup. (Pickup not included) Stamped copper gold plated cover Includes gold hardware Dimensions: 3.45" x 2" x .39" Compatible with: MGB Mini Box Bucker Pickup 8.0 | 6 String Shim available here,

Designed to work with our 3/4 String Mini Box Bucker Pickups. Aluminum stamped Plated black finish Includes black hardware Compatible with: MGB Mini Box Bucker Pickup 4.0 | 3/4 String Shim available here.

  Designed to work with our 6 String Mini Box Bucker Pickup 8.0. (Pickup not included) Aluminum cover Includes black hardware Compatible with: MGB Mini Box Bucker Pickup 8.0 | 6 String Shim available here.

  Designed to work with our 6 String Mini Box Bucker pickup. (Pickup not included) Antique Brass finish cover Includes  hardware Compatible with: MGB Mini Box Bucker Pickup 8.0 | 6 String Shim available here.

Our 2nd generation humbucker pickup specifically designed for use in cigar box guitars! The best just got better, we listened to our customers and made some improvements. The cover and frame are now rosewood, we have also added a black fiber baseplate to add strength and style. We still use Alnico 5 magnets which add more focus and enhanced dynamics. Enamel-coated magnet wire delivers warm vintage-style tones. These pickups available in 3 and 4 string configuration measure 8.8k. This new model also includes wiring for split coils for those wanting to separate the coils. Another quality guitar pickup from MGB Guitars. Black wire is hot, green/braid is ground and red/white are where the coils connect.   Quality Guitar Pickup by MGB Guitars Specifically designed for cigar box guitars Rosewood cover and trim ring No noise sound Alnico 5 magnets Note: Also available with our push pull pot harness. This allows you to easily move from a single coil pickup to a humbucker by simply pushing or pulling the tone knob. Soldered sealed and tested. This is our favorite setup at MGB Guitars. Watch Video: Audio Sample of MGB Box Bucker Gen 2

Designed to work with our 3/4 String Mini Box Bucker Pickups. Aluminum stamped Plated black finish Includes black hardware Compatible with: MGB Mini Box Bucker Pickup 4.0 | 3/4 String

  Designed to work with our 6 String Mini Box Bucker pickup. (Pickup not included) Aluminum cover Includes chrome hardware Compatible with: MGB Mini Box Bucker Pickup 8.0 | 6 String Shim available here.