Search results for "spacer plate":

This bridge shim is intended for use with 3 string hardtail bridges. This allows for increasing the height of the string on your build!  

This bridge shim is intended for use with 4 string hardtail bridges. This allows for increasing the height of the string on your build!

This bridge riser is intended for use with 4 string hardtail bridges. This allows for furthering the height of the string on your build!

Perfect for keeping strings aligned when using a zero fret. Available in Cherry, Maple or Rosewood. 1.5" wide, .3 " tall and .2 inches thick. Remove mask on Cherry and Maple before gluing in place. Make sure strings rest firmly on the zero fret, adjust slots if need be.

2.0  inches by 2.5 inches, mounting screw included.

This plate is perfect for mounting a hard-tail bridge and a rail style pickup.   Available in chrome, black or gold finish. Available for 3 and 4 string MGB bridges Made from 1/8 inch sturdy acrylic Includes mounting screws  Works with MGB Hot Rail (20631) and blade style pickups   Use the T-Plate template for help in locating mounting holes

Use this template for marking locations of string slots on the nut. Has suggested locations for both 3 and 4 string builds.

MGB Guitars is proud to introduce their Easy Box LP enclosure. The box is built using purfling and braces to create an incredibly strong and rigid structure.   Made to fit most standard modern 6" by 12" license plates. Opening measures 6 inches by 12 inches.  Measuring 7 1/4 inches by 13 1/8 inches and 1 7/8 thick the box is made from thin ply with a top veneer of Sapele  Box is finished with a semi gloss oil product Mounting holes are provided for the volume and tone control. This box works perfectly with the Super Neck and Easy Neck. With a Super Neck the bridge or saddle will be roughly 4 1/4 inches from the left edge of the plate. Ghosting  any MGB Flat pup on the back side of the plate provides solid output. Secure with double sided tap, hot glue or epoxy, make sure to have the magnet face the strings. This box provides a perfect canvass for creating your own piece of musical art. Search EBAY for a cool vanity plate. Roughly 7 1/4 inches by 13 1/8 inches Approximately 1 7/8 inches deep The box head wall is a full 5/8 thick Multi-ply construction with Sapele veneer Plate mounting hardware included  .

The Easy Fretter is a pre loaded and ready to go fretboard that is sized to fit the 2 inch material found at the big box stores. 25 1/2 inch scale 19 3/8 inches long 1 1/2 inches wide  .24 inch thick Available in Maple or Rosewood 21 frets Face fret markers  Zero fret installed  Zero fret is .020 taller than other frets Rosewood string spacer included for either 3 or 4 strings Use woodworking glue to secure the fretboard to the neck. Strongly encourage using a clamping caul to help keep the neck and fret board straight. The string spacers mount at the end to keep the strings aligned. 

Due to the random thickness of box walls it is often a challenge to install a jack. Jack plates are very handy in that they work well with any wall thickness.  It is often a challenge to mount the plate squarely on the box. This new template from MGB allows you to drill mounting holes for the four jack plate screw holes. Simply drill a 7/8 inch hole in the wall of the box, feed the jack through the opening and secure it to the plate. Then secure the plate to the box. Place the round portion on the back of the template into the 7/8s hole and then drill the four mounting holes using a 1/16 inch or 2 mm bit.  Secure the jack to the plate then install on the box. Click here for the Jack Plate.

Birch 3 inch cover plate with hardware. 

MGB kits are made for people with a fundamental knowledge of building stringed instruments. There are many videos available on our Youtube Channel that can provide help. We are also available by phone to help. MGB kits are made to order and can take a few extra days to prepare. They may ship in a few days or could take up to a week. An original design by MGB. Included are: 12" x 6  3/4" x 2 1/2" Atabey box that is fully machined, reinforced and ready for assembly. 25 1/2 inch scale Super Neck (our best cbg neck) Rosewood and Okume fretted neck predrilled for 3/4 tuners. Neck reinforcement plate is included. Uses a zero fret and string spacer is installed.  MGB Hot Tuna mini humbucker pickup with harness which includes push pull pot to select single coil or humbucker.  Mounting hardware and knobs. Black Tuners, bridge, strap pins, jack plate and back cover. Includes of .009, .013, .017, .026 .036 and .046 strings. Use a 7/16 inch deep well socket for the neck hanger bolt and a 10 mm socket or wrench to tighten tuner ferules.  Assembly available HERE Remember the price includes free packing and shipping, a $25 value.  

Cherry 3 inch cover plate with hardware. 

MGB kits are made for people with a fundamental knowledge of building stringed instruments. There are many videos available on our Youtube Channel that can provide help. We are also available by phone to help. MGB kits are made to order and can take a few extra days to prepare. They may ship in a few days or could take up to a week. Kit includes everything needed to complete this attractive 3/4 string instrument. Included are: 9 1/2" x 7 1/4" x 2" box that is fully machined, reinforced and ready for assembly. 24 inch scale Easy Neck Rosewood and Okume fretted neck predrilled for 3/4 tuners. Neck reinforcement plate is included. String slots on nut are filed Hot Rail pickup with harness installed. Push/pull switch on tone pot allows selecting between single coil and humbucker.  Mounting hardware and knobs. Gold tuners, bridge, strap pins and  black back cover. Includes a black jack plate. Includes appropriate packs of .013,  .017, .026 and .036 strings. Use a 7/16 inch deep well socket for the neck hanger bolt and a 10 mm socket or wrench to tighten tuner ferules.  Assembly available HERE Remember the price includes free packing and shipping, a $25 value. Helpful video HERE. Frank McGrogan gives it a spin.