All products
3/4 String Mini Box Bucker Covers
Accessories
Bass Guitar Parts
Best Selling Products
Buy Cigar Box Guitar Parts
Buy Guitar Bridges
Buy one, get 50% off a second one
CBGLife™ Accessories & More
CBGLife™ Hats
Cigar Box Guitar Builders
Cigar Box Guitar Kits
Decorative Hardware For Guitars
Discontinued
Guitar Accessories
Guitar Boxes & Bodies
Guitar Control Plates
Guitar Electronics Parts
Guitar Fretboards
Guitar Input Jacks
Guitar Knobs
Guitar Necks
Guitar Pickups
Guitar Resonator Cone & Cover
Guitar Strap Button
Guitar String Retainers
Guitar Strings
Guitar Tailpieces
Guitar Tools
Guitar Tuners
Made in the USA
MGB CBG Collection
MGB Deals
New Guitar Parts
Newest Products
Ready to Play
Sound Hole Covers
Trim Rings & Covers
Ukulele Guitar Parts
U-Bass Kit- Fretted or Fretless
$80.00
This kit does not include a box. This kit includes all the items needed to build a 20 (see note below on intonation) inch scale electric U-Bass. The neck is made of Okume and the fret board and bridge are made of Walnut. Polyurethane strings are provided as well as a bone nut that is fitted to the strings. The neck includes a hanger bolt for mounting to the box. The minimum box length that can be used is 12 inches and a box that is 13 inches or longer is recommended. Make sure to reinforce the box and we suggest using a 27093 reinforcement plate.
The heavy duty tuners are made specifically for this type of instrument. Unlike other tuners you will need to disassemble the tuner to install it in head stock. Remove the screw, gear and axle before installing the tuner body. Reassemble and and add washer and ferrule. Tighten with a 15mm wrench. Normal string winders will not work and we suggest you use our 24010 winder which will accommodate the oversized knobs on these tuners.
Due to the mass and size of the strings we have found that a scale length of 20.3 inches works better for intonation. The strings are anchored on the bridge using knots on the inside of the box. Our 41003 template is available for aligning and positioning the bridge. The bridge can be glued to the box however we prefer using screws and finish washers. When the bridge is installed the string clearance holes can be drilled through the box top.
The electronics package includes a compensated piezo pickup, preamp/equalizer, tuner and battery box. Included are template/trim rings for mounting the components. The battery box uses two 2032 (not included) round batteries which are installed positive side up. A plug will need to be installed in the jack for the tuner to operate. Tune to EADG.
Special note: As the strings are soft and the leading edge of the nut is quite sharp, oftentimes the strings will bind on the nut and the gears will grind till they fail. The solution is to lift the strings over the nut as you tighten the tuners.
Check online for videos on installing U-Bass strings.
U-Bass Tuner Set of four
$22.00
Special note: As the strings are soft and the leading edge of the nut is quite sharp, oftentimes the strings will bind on the nut and the gears will grind till they fail. The solution is to lift the strings over the nut as you tighten the tuners
Easy to install. Includes two right and two lefts. Fits headstocks that are .500 inch thick. Fits hole that is .525 inch.
Ukulele Carry Bag
from $9.00
High quality padded ukulele carry bag.
Heavy padded Cordura construction
Waterproof and dust proof
Front panel pocket
Carry handle and back pack straps
24 x 9 x 3 inches
Sized for Concert Ukuleles and smaller instruments
Undercrown Hot Tuna 6 String
$150.00
MGB kits are made for people with a fundamental knowledge of building stringed instruments. There are many videos available on our Youtube Channel that can provide help. We are also available by phone to help
Kit includes everything needed to complete this attractive 6 string instrument.
Included are:
11.5" x 7" x 2.25" box that is fully machined, reinforced and ready for assembly.
25.5 inch scale Toasted Tele Style Maple and Rosewood fretted neck predrilled for 6 tuners. String slots on nut are filed
MGB Hot Tuna black pickup with push pull harness allows you to go from single coil to humbucker.
Black knobs, tuners, bridge, strap pins, jack plate and Sapelli back cover.
Includes a set of strings.
Assembly available HERE
Zero Fret String Spacer
from $1.00
Perfect for keeping strings aligned when using a zero fret. Available in Cherry, Maple or Rosewood. 1.5" wide, .3 " tall and .2 inches thick. Remove mask on Cherry and Maple before gluing in place. Make sure strings rest firmly on the zero fret, adjust slots if need be.
Zoomy Basic Box Kit
$60.00
Build your own 50s retro cbg using the new Zoomy box from MGB. Easy to assemble and totally customizable. Can be used for 3,4 or 6 string guitars. Made primarily for use with bolt on necks and works perfectly with MGB Easy Necks, Super Necks and the Super Sixer Neck. Since the box is not symmetrical around the center line, it is recommended that you use a neck template to help locate the bridge. Can also be used for a U Bass.
The top can be easily modified to accept your favorite pickup.
There is no limit on what can be used on the top surface; paint, stain, laminates, veneers or just about any type of art you like. Amazon sells a wide selection of colorful pick guard materials that are the perfect size. We suggest using contact cement to secure the laminate.
Secure the top plate to the body ring using the screws provided. Make sure the body is pressed into the ring well resting on the flange. Install the neck and electronics then secure the back plate in place.
Kit includes:
Machined and ready to finish top and bottom pine plates.
Predrilled oak neck bolt block.
Formed and predrilled aluminum body ring.
Hardware and extra long 1/4 20 hanger bolt included.
Check HERE for Zoomys that are half assembled using one of our preselected laminates.
Zoomy Camo Kits
from $150.00
Build your own 50s retro/camo style cbg using the new Zoomy Kit from MGB. Easy to assemble. Available in 3 or 4 string models. Available in two Camo colors; blue and gray.
Kit includes:
Kit does not include the emblems or flag, these can be easily found on Amazon, search emblems.
Finished body ready to assemble with selected camo pattern, Blue body has bright dipped aluminum body ring, Gray body has a black anodized body ring.
Easy neck with Maple fret board predrilled for tuners on the Blue camo kit.
Deluxe Easy neck with Rosewood fret board predrilled for tuners on the Brown camo kit.
Nut is pre-slotted and may need further adjustment
Blue comes with Chrome Hot Tuna tuners, knobs and strap pins Gray comes with antique brass hardware
Hot Tuna pickups have Push Pull pot harness
Reinforcement plate
Strings 36, 26 and 17 for 3 string or 36, 26,17 and 13 for four string
Bottom plate with screws, ready for customer supplied finish
Add tuners to headstock and mount neck on body. Install electronics and bridge in predrilled holes. Install strings. Finish the back plate as desired. Secure the back plate in place. Some minor additional sanding may be required to get the back plate to fit
Assembly available HERE
Zoomy CBG Kit...Yellow Cracked Ice
$150.00
Build your own 50s retro style cbg using the new Zoomy Kit from MGB. Easy to assemble. Available in 3 or 4 string models.
Kit includes:
Finished body ready to assemble
Easy neck with Maple fret board predrilled for tuners
Nut is pre-slotted and may need further adjustment
Chrome tuners, knobs and strap pins
Chrome Hot Tuna with Push Pull pot harness
Reinforcement plate
Strings 36, 26 and 17 for 3 string or 36, 26,17 and 13 for four string
Bottom plate with screws, ready for customer supplied finish
Add tuners to headstock and mount neck on body. Install electronics and bridge in predrilled holes. Install strings. Finish the back plate as desired. Secure the back plate in place. Some minor additional sanding may be required to get the back plate to fit
Assembly available HERE
Zoomy with Black Band
$175.00
Build your own 50s retro/camo style cbg using the new Zoomy Kit from MGB. Easy to assemble. Available in 3 or 4 string models. Available in two cool laminates; Charcoal Boomerang or Copper Top.
Kit includes:
Finished body ready to assemble with selected Charcoal Boomerang or Copper Top laminate
Charcoal Boomerang kit includes Fins Easy neck predrilled for tuners and black hardware.
Copper Top kit includes Snowflake Easy neck predrilled for tuners and antique brass hardware.
Nut is pre-slotted and may need further adjustment
Hot Tuna pickups have Push Pull pot harness
Reinforcement plate
Strings 36, 26 and 17 for 3 string or 36, 26,17 and 13 for four string
Bottom plate is covered with black laminate with screws, ready for customer supplied finish
Add tuners to headstock and mount neck on body. Install electronics and bridge in predrilled holes. Install strings. Finish the back plate as desired. Secure the back plate in place. Some minor additional sanding may be required to get the back plate to fit
Assembly available HERE
Zoomy...Ready To Go
$75.00
Build your own 50s retro cbg using the new Zoomy box from MGB. Easy to assemble and easy to add the electronics of your choice. Can be used for 3,4 or 6 string guitars. Made primarily for use with bolt on necks and works perfectly with MGB Easy Necks, Super Necks and the Super Sixer Neck. Since the box is not symmetrical around the center line, it is recommended that you use a neck template to help locate the bridge. Can also be used for a U Bass.
The tops come in five cool and colorful laminates. The Zoomy RTG comes in twos styles; blank and Hot Tuna ready. The top plate is secured to the body ring. Install the neck and electronics. Finish the back plate as needed. Secure the back plate in place. Some minor additional sanding may be required to get the back plate to fit
Kit includes:
Top assembly including top plate, body ring and predrilled oak neck block.
Bottom plate ready for finish
Hardware and extra long 1/4 20 hanger bolt included.
If you want to take a different direction on the laminate check HERE
