All products
3/4 String Mini Box Bucker Covers
Accessories
Bass Guitar Parts
Best Selling Products
Buy Cigar Box Guitar Parts
Buy Guitar Bridges
Buy one, get 50% off a second one
CBGLife™ Accessories & More
CBGLife™ Hats
Cigar Box Guitar Builders
Cigar Box Guitar Kits
Decorative Hardware For Guitars
Discontinued
Guitar Accessories
Guitar Boxes & Bodies
Guitar Control Plates
Guitar Electronics Parts
Guitar Fretboards
Guitar Input Jacks
Guitar Knobs
Guitar Necks
Guitar Pickups
Guitar Resonator Cone & Cover
Guitar Strap Button
Guitar String Retainers
Guitar Strings
Guitar Tailpieces
Guitar Tools
Guitar Tuners
Made in the USA
MGB CBG Collection
MGB Deals
New Guitar Parts
Newest Products
Ready to Play
Sound Hole Covers
Trim Rings & Covers
Ukulele Guitar Parts
White Knob Volume or Tone
$0.75
Quality guitar hardware from MGB Guitars.
Perfect for any style guitar
Plastic construction
White finish
Gibson style look
White Pearl over Black knob
$4.50
Quality guitar hardware from MGB Guitars.
Slip on style
.825 inches tall
.75 diameter
Price per each
Wire Harness with Volume/Tone/Blending
$5.50
MGB wire harness for multiple pickups with volume/tone/blending allows infinite pickup placement and broader range of sound and tone.
Presoldered v/t/blending pots and input jack
Wire harness designed for multi pickup set up
Wiring Harness w/ Push-Pull Pots
$7.50
Pre-soldered jack, push-pull pot, with a capacitor.
To connect a push-pull harness to a Box Bucker Gen 2 or any other split coil pickup connect as follows. There is a long black wire which is the ground wire for the bridge. The shorter black wire includes a white lead that goes to the hot on the pickup , the bare jacket wire goes to the ground from the pickup. The center tap wires, usually red/green connect to one of the top tabs on the switch.
Push the knob in for humbucking and pull out for single coil.
Presoldered jack
Push-Pull Pot
Capacitor
Wise Man 5 String CBG
$150.00
MGB kits are made for people with a fundamental knowledge of building stringed instruments. There are many videos available on our Youtube Channel that can provide help. We are also available by phone to help.
Kit includes everything needed to complete this attractive 5 string instrument. Available with gold hardware.
Included are:
11 1/2” x 6 3/4" x 2 1/2" box that is reinforced, fully machined and ready for assembly.
25.5 inch scale MGB Special Neck , available with Maple or Rosewood fret boards with side and face markers. The neck is predrilled for 5 tuners.
MGB Gold Hot Tuna with 500k push pull pot harness soldered, tested and ready to install. This allows switching between single coil and humbucker operation.
Gold tuners, Single Shot Bridges, strap pins and knobs.
Pack of .010, .013, .017, .026 and .036 strings. Tune to GDGBG.
Neck mounting hardware.
Assembly available HERE
Zero Fret String Spacer
from $1.00
Perfect for keeping strings aligned when using a zero fret. Available in Cherry, Maple or Rosewood. 1.5" wide, .3 " tall and .2 inches thick. Remove mask on Cherry and Maple before gluing in place. Make sure strings rest firmly on the zero fret, adjust slots if need be.
Zippy 3 String Neck | 20 Inch Scale
from $45.00
Quality Crafted Guitar/Ukulele Neck | Install Ready
Easy to Install
20 Inch Scale 19 Frets
3 String Ready
Sanded, Finished and ready to use
Overall Length 19”
Nut and Tuners Included, Some Assembly Required
Hardwood Construction with Rosewood Fingerboard
Ready to go out of the box. Solid hardwood construction with a synthetic fret board. The neck is sanded and has a spray finish. The Rosewood fret board is unfinished. The overall length is 16 inches and the fret board overhangs the neck by 2-3/4 inches. The neck is 1-3/8 inches wide at the nut and 1 -7/8 inches wide at other end. The nut is set to the right height. Mounting is easy using the hanger style bolt.
Zippy 4 String Neck | 20 Inch Scale
from $45.00
Quality Crafted Guitar Neck | Install Ready
Easy to Install
20 Inch Scale 19 Frets
4 String Ready
Sanded, Finished and ready to use
Overall Length 19"
Pre-slotted Nut, Some Assembly Required
Available with Chrome, Gold or Black tuners.
Hardwood Construction with Rosewood Fingerboard
Ready to go out of the box. Solid hardwood construction with a synthetic fret board. The neck is sanded and has a spray finish. The Rosewood fret board is unfinished. The overall length is 16 inches and the fret board overhangs the neck by 2-3/4 inches. The neck is 1-3/8 inches wide at the nut and 1 -7/8 inches wide at other end. The nut is set to the right height and is pre-slotted. Mounting is easy using the hanger style bolt.
Zoomy
$60.00
Build your own 50s retro cbg using the new Zoomy box from MGB. Easy to assemble and totally customizable. Can be used for 3,4 or 6 string guitars. Made primarily for use with bolt on necks and works perfectly with MGB Easy Necks, Super Necks and the Super Sixer Neck. Since the box is not symmetrical around the center line, it is recommended that you use a neck template to help locate the bridge. Can also be used for a U Bass.
The top can be easily modified to accept your favorite pickup.
There is no limit on what can be used on the top surface; paint, stain, laminates, veneers or just about any type of art you like. Amazon sells a wide selection of colorful pick guard materials that are the perfect size. We suggest using contact cement to secure the laminate.
Secure the top plate to the body ring using the screws provided. Make sure the body is pressed into the ring well resting on the flange. Install the neck and electronics then secure the back plate in place.
Kit includes:
Machined and ready to finish top and bottom pine plates.
Predrilled oak neck bolt block.
Formed and predrilled aluminum body ring.
Hardware and extra long 1/4 20 hanger bolt included.
Check HERE for Zoomys that are half assembled using one of our preselected laminates.
Zoomy Camo Kits
from $150.00
Build your own 50s retro/camo style cbg using the new Zoomy Kit from MGB. Easy to assemble. Available in 3 or 4 string models. Available in two Camo colors; blue and gray.
Kit includes:
Kit does not include the emblems or flag, these can be easily found on Amazon, search emblems.
Finished body ready to assemble with selected camo pattern, Blue body has bright dipped aluminum body ring, Gray body has a black anodized body ring.
Easy neck with Maple fret board predrilled for tuners on the Blue camo kit.
Deluxe Easy neck with Rosewood fret board predrilled for tuners on the Brown camo kit.
Nut is pre-slotted and may need further adjustment
Blue comes with Chrome Hot Tuna tuners, knobs and strap pins Gray comes with antique brass hardware
Hot Tuna pickups have Push Pull pot harness
Reinforcement plate
Strings 36, 26 and 17 for 3 string or 36, 26,17 and 13 for four string
Bottom plate with screws, ready for customer supplied finish
Add tuners to headstock and mount neck on body. Install electronics and bridge in predrilled holes. Install strings. Finish the back plate as desired. Secure the back plate in place. Some minor additional sanding may be required to get the back plate to fit
Assembly available HERE
Zoomy CBG Kit...Yellow Cracked Ice
$150.00
Build your own 50s retro style cbg using the new Zoomy Kit from MGB. Easy to assemble. Available in 3 or 4 string models.
Kit includes:
Finished body ready to assemble
Easy neck with Maple fret board predrilled for tuners
Nut is pre-slotted and may need further adjustment
Chrome tuners, knobs and strap pins
Chrome Hot Tuna with Push Pull pot harness
Reinforcement plate
Strings 36, 26 and 17 for 3 string or 36, 26,17 and 13 for four string
Bottom plate with screws, ready for customer supplied finish
Add tuners to headstock and mount neck on body. Install electronics and bridge in predrilled holes. Install strings. Finish the back plate as desired. Secure the back plate in place. Some minor additional sanding may be required to get the back plate to fit
Assembly available HERE
Zoomy with Black Band
$175.00
Build your own 50s retro/camo style cbg using the new Zoomy Kit from MGB. Easy to assemble. Available in 3 or 4 string models. Available in two cool laminates; Charcoal Boomerang or Copper Top.
Kit includes:
Finished body ready to assemble with selected Charcoal Boomerang or Copper Top laminate
Charcoal Boomerang kit includes Fins Easy neck predrilled for tuners and black hardware.
Copper Top kit includes Snowflake Easy neck predrilled for tuners and antique brass hardware.
Nut is pre-slotted and may need further adjustment
Hot Tuna pickups have Push Pull pot harness
Reinforcement plate
Strings 36, 26 and 17 for 3 string or 36, 26,17 and 13 for four string
Bottom plate is covered with black laminate with screws, ready for customer supplied finish
Add tuners to headstock and mount neck on body. Install electronics and bridge in predrilled holes. Install strings. Finish the back plate as desired. Secure the back plate in place. Some minor additional sanding may be required to get the back plate to fit
Assembly available HERE
Zoomy...Ready To Go
$75.00
Build your own 50s retro cbg using the new Zoomy box from MGB. Easy to assemble and easy to add the electronics of your choice. Can be used for 3,4 or 6 string guitars. Made primarily for use with bolt on necks and works perfectly with MGB Easy Necks, Super Necks and the Super Sixer Neck. Since the box is not symmetrical around the center line, it is recommended that you use a neck template to help locate the bridge. Can also be used for a U Bass.
The tops come in five cool and colorful laminates. The Zoomy RTG comes in twos styles; blank and Hot Tuna ready. The top plate is secured to the body ring. Install the neck and electronics. Finish the back plate as needed. Secure the back plate in place. Some minor additional sanding may be required to get the back plate to fit
Kit includes:
Top assembly including top plate, body ring and predrilled oak neck block.
Bottom plate ready for finish
Hardware and extra long 1/4 20 hanger bolt included.
If you want to take a different direction on the laminate check HERE
