MGB Fat Bottom Guitar Body Kit MGB Fat Bottom Guitar Body Kit
MGB Fat Bottom Guitar Body Kit $45.00
Note: current Fat Bottom kits do not include the neck notches.  MGB Guitars is proud to introduce its Fat Bottom guitar body kit. This is the same body that MGB has used to create his unique cigar box mosaic guitars. Measuring roughly 12 inches by 16 inches the kit includes a 1/4 top panel, two ¾ inch thick center rings and a 1/4 inch bottom panel that includes pilot holes on the back side should you wish to mount with screws. Current product does not include the slot at the top. Approximately 2” in depth/thickness. Shaped more like a traditional guitar this blank box provides a perfect canvass for creating your own piece of art. Check out the gallery of pictures to see what Mike and others have done with these bodies. Veteran Made in the USA Roughly 12 inches by 16 inches Includes a 1/4 top panel with a cut out for a 1 ½ inch neck, two ¾ inch thick center rings and a 1/4 inch bottom panel Approximately 2” in depth/thickness. Includes pilot holes on the back side to mount with screws Plywood construction with birch veneer   Note: Sanding & Assembly of this kit is required.  Assembly Tips for the MGB Fat Bottom Body Kit: To assemble the 2 inner rings, we recommend applying a generous amount of wood glue on the top of the "inner bottom" layer, apply the "inner top" layer over top of it, and use several clamps to tightly hold in place. Be sure to wipe any excess glue away. Let the glue dry fully before removing from clamps.  If the cigar box mosaic look is something you are interested in, this is how we lay it out. After you decide where each piece is going to be placed, use wood glue to apply to the top.   The back panel is lined with pre-drilled holes so that you can screw to the inner rings. You can wood glue the back as well if you prefer not to use screws, simply flip the back panel over so that the pre-drilled holes are facing inside and out of view.   
MGB Comet Guitar Body Kit MGB Comet Guitar Body Kit
MGB Comet Guitar Body Kit $40.00
MGB Guitars is proud to introduce its Comet guitar body kit. This is the same body that MGB has used to create his unique cigar box mosaic guitars. Measuring roughly 11 inches by 15 inches the kit includes a 1/4 top panel with a cut out for a 1 ½ inch neck, two ¾ inch thick center rings and a 1/4 inch bottom panel that includes pilot holes on the back side should you wish to mount with screws. Approximately 2” in depth/thickness. This blank box provides a perfect canvass for creating your own piece of art. Check out the gallery of pictures to see what Mike and others have done with these bodies. Veteran Made in the USA Roughly 11 inches by 15 inches Includes a 1/4 top panel with a cut out for a 1 ½ inch neck, two ¾ inch thick center rings and a 1/4 inch bottom panel Approximately 2” in depth/thickness Includes pilot holes on the back side to mount with screws Plywood construction with birch veneer   Note: Sanding & Assembly of this kit is required. 
Easy Box Double Sided Enclosure Easy Box Double Sided Enclosure
Easy Box Double Sided Enclosure from $19.50
MGB Guitars is proud to introduce their Easy Box enclosure. This innovative enclosure has two sides with two distinct uses. One with a sound hole and one with out. This box was designed and built using the same principles used in acoustic instrument construction. The box is built using purfling and braces to create an incredibly strong and rigid structure. Additional reinforcements were added to key locations to allow when securing bridges. Cover plates are available to cover the sound hole when it is on the back side.  Measuring  9 3/4 inches by 7 inches and 2 1/2 thick the box is made from thin ply with a top veneer of Sapele. IT comes in two versions one is unfinished and the other has several coats of spray finish. This box provides a perfect canvass for creating your own piece of musical art. The photo of the box split in two is to show the placement of internal components. Roughly 7 inches by 9.75 inches Approximately 2 1/2 inches deep Acoustic side includes 2 3/8 inch sound hole The box head is a full 5/8 thick Multiply construction with Sapele veneer .
Bigfoot Easy Box Double Sided Enclosure Bigfoot Easy Box Double Sided Enclosure
Bigfoot Easy Box Double Sided Enclosure $25.00
MGB Guitars is proud to introduce their Bigfoot Easy Box enclosure. This innovative enclosure has two sides with two distinct uses. One with a sound hole and one with a Bigfoot sound hole. This box was designed and built using the same principles used in acoustic instrument construction. The box is built using purfling and braces to create an incredibly strong and rigid structure. Additional reinforcements were added to key locations to allow when securing bridges. Cover plates are available to cover the sound hole.  Measuring  9 3/4 inches by 7 inches and 2 1/2 thick the box is made from thin ply with a top veneer of Sapele. IT comes in two versions one is unfinished and the other has several coats of spray finish. This box provides a perfect canvass for creating your own piece of musical art. The photo of the box split in two is to show the placement of internal components. Roughly 7 inches by 9.75 inches Approximately 2 1/2 inches deep Acoustic side includes 2 3/8 inch sound hole The box head is a full 5/8 thick Multiply construction with Sapele veneer   .