Guitar Tools

Includes the following:  3- 1/4-20 by 3 inch hanger bolts 3- 6mm by 2 inch Phillips head hanger bolts with 2 nuts  6- washers 1- 1/4-20 hanger bolt driver    

A perfect stand for displaying your CBG. Sits on the floor, cabinet or shelf. Metal construction with protective foam cover.  Cradles boxes that are 6 1/2 inches wide and up to 3 1/2 inches deep.

New from MGB. The Klutch is a portable guitar stand providing great neck support and  prevents guitar slide. It also sits upright to help with changing strings or cleaning the guitar. Fits in your case, your pocket, gig bag, and in the back of your amp Firmly sits on stools, chairs, amps, tables, and counters Made from a TPV (ThermoPlastic Vulcanizate) for no more scratches or burn marks on  your necks Used on many tube stands or wall hangers Made in the USA

Guide for marking or drilling mounting holes in 2.5 inch holes. Made to work with all MGB 3 inch cover plates.

This template allows the builder to accurately locate any of the MGB Flat Pups and mark the necessary holes for mounting the cover. it easy to use, simply: I identify and mark the centerline of the box. Select the appropriate pickup on the template. Mark the mounting holes and the wire hole for the pickup. Drill a one inch hole when using a RSG pickup where the pickup is already soldered to a harness.  Install the pickup/cover. The template provides the name and part number of all MGB Flat Pups and the cover options.

This handy template allows the builder to accurately mark the locations for potentiometers. Align the template with the lower left corner of the box. Then mark the holes through the template with an awl. Drill the holes using a 5/16s drill. Brad point drill bits work well. Note we also mark our bits with colored tape to help find them quickly.

MGB is pleased to announce our latest template, this template will aid in locating our Tele Style bridges. Precise location of these bridges is critical in making a cbg that will be easy to tune and intonate. It will also aid in getting the strings properly located/centered in relation to the fret board. This template works with our Easy Neck, Super Neck and Super Sixer Neck. It works with our 3 String XL bridges, 4 String Bridges and our 6 String Bridges.  Using the E-System is easy. Mark the center line of the box. We suggest using Blue tape and a pencil or pen Position the body of the template on the box lining it up with the center line and the neck end of the box.  Temporarily secure the template with Blue tape. Each insert is marked with the neck/bridge combination that it is meant to work with. Select the appropriate template insert that matches the neck and bridge you are using. Before attaching the bridge to the box do a dry fit and make sure the distance from the nut to leading edge of the saddles corresponds to the sale length. This is a critical step, always confirm that the location of the bridge is correct before drilling and installing screws.