All products
3/4 String Mini Box Bucker Covers
Accessories
Bass Guitar Parts
Best Selling Products
Buy Cigar Box Guitar Parts
Buy Guitar Bridges
Buy one, get 50% off a second one
CBGLife™ Accessories & More
CBGLife™ Hats
Cigar Box Guitar Builders
Cigar Box Guitar Kits
Decorative Hardware For Guitars
Discontinued
Guitar Accessories
Guitar Boxes & Bodies
Guitar Control Plates
Guitar Electronics Parts
Guitar Fretboards
Guitar Input Jacks
Guitar Knobs
Guitar Necks
Guitar Pickups
Guitar Resonator Cone & Cover
Guitar Strap Button
Guitar String Retainers
Guitar Strings
Guitar Tailpieces
Guitar Tools
Guitar Tuners
Made in the USA
MGB CBG Collection
MGB Deals
New Guitar Parts
Newest Products
Ready to Play
Sound Hole Covers
Trim Rings & Covers
Ukulele Guitar Parts
$35 Off Bass Super Neck-Maple and Rosewood Neck | 30 inch Scale
$50.00
Quality Crafted Guitar Neck | Easy to Install
30 inch Scale
Suitable for 4 string builds
Head stock is pre-drilled for bass tuners
22 jumbo frets installed
Truss rod installed
0.6" thick headstock
1 5/8" width at nut
2 3/16" width at 12th fret
Overall length 30"
Top and side fret markers are included
Plastic slotted Nut
Hanger bolt is installed and hardware is included
1/8 inch shim is included
Use MGB short scale (31") bass strings
Box should be 12 inches in length
Maple construction with rosewood fingerboard
The perfect neck for your next bass build. The neck is completely finished and ready to go. Simply reinforce your box and bolt the neck on. The finger board is radiused just like high end guitar necks. Solid maple construction with a rosewood fret board set for 30 inch scale. The neck is meticulously sanded and the maple portion has a spray finish. The rosewood fret board is unfinished.
Buy strings here.
Buy tuners and accessories here.
Watch This Video:
3 or 4 String Maple and Rosewood Neck | 25.5 inch Scale
$85.00
Quality Crafted Guitar Neck | Install Ready
25.5 Inch Scale
3 or 4 String Ready
3.75" x 6" Paddle Size
Overall Length 35.5"
10" Tailpiece
Maple Construction with Rosewood Fingerboard
The perfect neck for your next build. Suitable for 3 and 4 string cigar box guitars. Solid maple construction with a rosewood fret board set for 25.5 inch scale. A 3 and 3/4 by 6 inch paddle style headstock provides the perfect blank to create the shape you want. The neck is meticulously sanded and the maple portion has a spray finish. The rosewood fretboard is unfinished. The overall length is 35 1/2 inches and the tailpiece is 10 inches long. The main portion of the neck is 1-1/2 inches wide.
Deluxe Easy Neck 24 inch Scale
$60.00
Quality Crafted Guitar Neck | Easy to Install
This deluxe kit is similar to the standard product but includes white banding along both sides of the neck and black side fret markers.
24 inch Scale
Perfect for boxes that are 9" long
Suitable for 3,4 and 5 string builds
9/16" thick headstock
Nut is installed but not slotted
1 3/8" width at nut
1 1/2" width at 12th fret
Fretboard length is 17.5"
Overhang is 1 1/8"
Overall length 23 3/4"
Face fret markers are included, side markers not included
Bone Nut
Hanger bolt and hardware included
Okume construction with rosewood fingerboard
Headstock Tuner template is available
The perfect neck for your next build. The Easy Neck is completely finished and ready to go. Simply reinforce your box and bolt the neck on. Solid Okume construction with a rosewood fret board set for 24 inch scale. The neck is meticulously sanded and the Okume portion has a spray finish. The rosewood fret board is unfinished. The Easy Neck is similar to the Super Neck and installation techniques are the same so the following video applies.
Bridge placement template
Watch This Video:
Easy Neck 24 inch Scale
$45.00
Quality Crafted Guitar Neck | Easy to Install
24 inch Scale
Perfect for boxes that are 9" long
Suitable for 3,4 and 5 string builds
9/16" thick headstock
Nut is installed but not slotted
1 3/8" width at nut
1 1/2" width at 12th fret
Fretboard length is 17.5"
Overhang is 1 1/8"
Overall length 23 3/4"
Face fret markers are included
Bone Nut
Hanger bolt and hardware included
Okume construction with rosewood fingerboard
Headstock Tuner template is available
The perfect neck for your next build. The Easy Neck is completely finished and ready to go. Simply reinforce your box and bolt the neck on. Solid Okume construction with a rosewood fret board set for 24 inch scale. The neck is meticulously sanded and the Okume portion has a spray finish. The rosewood fret board is unfinished. The Easy Neck is similar to the Super Neck and installation techniques are the same so the following video applies.
Bridge placement template
Watch This Video:
Easy Neck Diatonic 24 inch Scale
$45.00
Quality Crafted Guitar Neck | Easy to Install
24 inch Scale
Perfect for boxes that are 9" long
Suitable for 3,4 and 5 string builds
9/16" thick headstock
Nut is installed but not slotted
1 3/8" width at nut
1 1/2" width at 12th fret
Fretboard length is 17.5"
Overhang is 1 1/8"
Overall length 23 3/4"
Face fret markers are included
Fret board shim included
Bone Nut
Hanger bolt and hardware included Use 10MM socket or wrench.
Okume construction with rosewood fingerboard
Headstock Tuner template is available
The perfect neck for your next build. The Easy Neck is completely finished and ready to go. Simply reinforce your box and bolt the neck on. Solid Okume construction with a rosewood fret board set for 24 inch scale. The neck is meticulously sanded and the Okume portion has a spray finish. The rosewood fret board is unfinished. The Easy Neck is similar to the Super Neck and installation techniques are the same so the following video applies.
Bridge placement template
Watch This Video:
Easy Neck Non-Fretted Neck-Rosewood or Maple finger board
from $47.50
Quality Crafted Guitar Neck | Easy to Install
Perfect for boxes that are short as 9" long
Suitable for 3,4 and 5 string builds
9/16" thick headstock
Nut is installed but not slotted
1 3/8" width at nut
1 1/2" width at 12th fret
Fretboard length is 17.5"
Overhang is 1 1/8"
Overall length 23 3/4"
Bone Nut
Hanger bolt and hardware included
Okume construction with Rosewood or Maple fingerboard
Headstock Tuner template is available
The perfect neck for your next build. The EZNeck is completely finished and ready to go. Simply reinforce your box and bolt the neck on. Solid Okume construction with a rosewood or Maple fret board. The neck is meticulously sanded and the Okume portion has a spray finish. The rosewood fret board is unfinished. The EZNeck is similar to the Super Neck and installation techniques are the same so the following video applies.
Bridge placement template
Watch This Video:
Easy Neck Okume & Maple Fretted Neck | 24 inch Scale
$47.50
Quality Crafted Guitar Neck | Easy to Install
24 inch Scale
Perfect for boxes that are 9" long
Suitable for 3,4 and 5 string builds
9/16" thick headstock
Nut is installed but not slotted
1 3/8" width at nut
1 1/2" width at 12th fret
Fretboard length is 17.5"
Overhang is 1 1/8"
Overall length 23 3/4"
Face fret markers are included
Bone Nut
Hanger bolt and hardware included
Okume construction with Maple Fretboard
Headstock Tuner template is available
The perfect neck for your next build. The Easy Neck is completely finished and ready to go. Simply reinforce your box and bolt the neck on. Solid Okume construction with a Maple fret board set for 24 inch scale. The neck is meticulously sanded and the Okume portion has a spray finish. The Maple fret board is unfinished. Headstock has a male veneer layer showing. The Easy Neck is similar to the Super Neck and installation techniques are the same so the following video applies.
Bridge Placement Template
Easy Neck with Premium Fret Markers
from $60.00
Quality Crafted Guitar Neck | Easy to Install
24 inch Scale
Predrilled headstock with slotted nut available
Perfect for boxes that are 9" long or longer
Suitable for 3,4 and 5 string builds
9/16" thick headstock
Nut is installed but not slotted as standard
1 3/8" width at nut
1 1/2" width at 12th fret
Fretboard length is 17.5"
Overhang is 1 1/8"
Overall length 23 3/4"
Fin or Snowflake face fret markers are included
Hanger bolt and hardware included
Okume construction with rosewood fingerboard
Headstock tuner template is available
Available with tuner holes drilled and nut filed for either 3 or 4 strings.
The perfect neck for your next build. The Easy Neck is completely finished and ready to go. Simply reinforce your box and bolt the neck on. Solid Okume construction with a rosewood fret board set for 24 inch scale. The neck is meticulously sanded and the Okume portion has a spray finish. The rosewood fret board is unfinished.
The Easy Neck is similar to the Super Neck and installation techniques are the same so the following video applies.
Bridge placement template
Watch This Video:
Mandolin Kit
$60.00
This kit includes everything needed to build a Mandolin except for the body. The neck is Okume with a Walnut fretboard. Binding and face and side fret markers are included. The scale length is 13 3/4 inches. The neck also includes a truss rod. A compensated and adjustable Walnut bridge is included along with a chrome tailpiece. Tuners and a truss rod cover are included. Four pairs of stings are provided including .012, .016, .026 and .032 sizes. Tuning is GDAE.
Note: Keep in mind the tension created by 8 strings is substantial, all boxes will need additional reinforcement to handle the added stress. Make sure the top where the neck is connected is thick (close to 1/2" is ideal) and rigid. You will note that two hanger bolts are used to provide and solid connection between the neck and the box.
MGB Super Neck Template
$7.50
Makes bridge placement a breeze
This template is specifically made for use with the Super Neck. Provides a the right location for a 3 or 4 string hard tail bridge. Always check to make sure the scale length is 25.5".
MGB Super Neck-Maple and Rosewood Neck | 25.5 inch Scale w zero fret
$70.00
Quality Crafted Guitar Neck | Easy to Install
25.5 inch Scale
Includes zero fret and zero fret string spacers for 3 and 4 strings
Suitable for 3,4 and 5 string builds
0.6" thick headstock
1 3/8" width at nut
1 3/4" width at 12th fret
Top and side fret markers are included
Bone Nut
Hanger bolt and hardware included
Hanger bolts are installed.
Maple construction with rosewood fingerboard
Note: these neck now include a zero fret to aid in getting perfect action height. Make sure to notch the bone nut to align strings. Strings should rest fully on the zero nut, see pics.
The perfect neck for your next build. The Super Neck is completely finished and ready to go. Simply reinforce your box and bolt the neck on. Solid maple construction with a rosewood fret board set for 25.5 inch scale. The neck is meticulously sanded and the maple portion has a spray finish. The rosewood fret board is unfinished.
Watch This Video:
MGB Super Neck/ Easy Neck Headstock Tuner Hole Template
$7.50
Makes bridge placement a breeze
This acrylic template is specifically made for use with the Super Necks and Easy Necks. Provides a template for laying out tuner holes. The large number of holes provide ultimate flexibility in laying out holes for tuners as need for each build. Warning: make sure to check spacing if tuners are placed closely on one side.
U-Bass Template
$10.00
Makes bridge placement a breeze
This template is specifically made for use with the U-Bass kit. Provides a the right location for the bridge. Always check to make sure the scale length is 20 5/16" at the bottom of the saddle where the lowest string rests.
Zippy 3 String Neck | 20 Inch Scale
from $40.00
Quality Crafted Guitar/Ukulele Neck | Install Ready
Easy to Install
20 Inch Scale 19 Frets
3 String Ready
Sanded, Finished and ready to use
Overall Length 19”
Nut and Tuners Included, Some Assembly Required
Hardwood Construction with Rosewood Fingerboard
Ready to go out of the box. Solid hardwood construction with a synthetic fret board. The neck is sanded and has a spray finish. The Rosewood fret board is unfinished. The overall length is 16 inches and the fret board overhangs the neck by 2-3/4 inches. The neck is 1-3/8 inches wide at the nut and 1 -7/8 inches wide at other end. The nut is set to the right height. Mounting is easy using the hanger style bolt.
Zippy 4 String Neck | 20 Inch Scale
from $40.00
Quality Crafted Guitar Neck | Install Ready
Easy to Install
20 Inch Scale 19 Frets
4 String Ready
Sanded, Finished and ready to use
Overall Length 19"
Pre-slotted Nut, Some Assembly Required
Available with Chrome, Gold or Black tuners.
Hardwood Construction with Rosewood Fingerboard
Ready to go out of the box. Solid hardwood construction with a synthetic fret board. The neck is sanded and has a spray finish. The Rosewood fret board is unfinished. The overall length is 16 inches and the fret board overhangs the neck by 2-3/4 inches. The neck is 1-3/8 inches wide at the nut and 1 -7/8 inches wide at other end. The nut is set to the right height and is pre-slotted. Mounting is easy using the hanger style bolt.