All products
3/4 String Mini Box Bucker Covers
Accessories
Bass Guitar Parts
Best Selling Products
Buy Cigar Box Guitar Parts
Buy Guitar Bridges
Buy one, get 50% off a second one
CBGLife™ Accessories & More
CBGLife™ Hats
Cigar Box Guitar Builders
Cigar Box Guitar Kits
Decorative Hardware For Guitars
Discontinued
Guitar Accessories
Guitar Boxes & Bodies
Guitar Control Plates
Guitar Electronics Parts
Guitar Fretboards
Guitar Input Jacks
Guitar Knobs
Guitar Necks
Guitar Pickups
Guitar Resonator Cone & Cover
Guitar Strap Button
Guitar String Retainers
Guitar Strings
Guitar Tailpieces
Guitar Tools
Guitar Tuners
Made in the USA
MGB CBG Collection
MGB Deals
New Guitar Parts
Newest Products
Sound Hole Covers
Trim Rings & Covers
Ukulele Guitar Parts
9 Volt Preamp/Equalizer Kit
$21.00
Preamp/equalizer 9v (battery not included)
Mounting hardware included
Cable Piezo
Includes template/trim ring with screws
Includes jack plate, drill 1 inch clearance hole
Includes modified ukulele saddle
Works perfectly with all MGB ukulele kits
Preamp/Equalizer router template
Bass Bridge with Piezo
$20.00
A perfect bridge and piezo combination for four string bass builds. Includes walnut bridge and compensated bar style piezo with four segments. Bridge measures 5.06 by .8 by .35 inches. Overall height of bridge and piezo is .53 inches. Recommended string spacing is .7 inches.
Tailpiece
Bass Tailpiece
$6.00
Perfect for four strings builds. This oak tailpiece measures 3 x 2 by .25 inches. Holes are .05, .065, '095 and .110 but can be easily enlarged if need
Bridge
Bass Thumb Rest
$5.00
Two pack of Rosewood thumb rests.
2 1/2 by 1/2 by 1/2 inches
Mounting Screws included
CBG Stand
$20.00
A perfect stand for displaying your CBG. Sits on the floor, cabinet or shelf. Metal construction with protective foam cover. Cradles boxes that are 6 1/2 inches wide and up to 3 1/2 inches deep.
Center Finder Scale 12 inch
$7.50
Easily find the center of a box. The perfect tool for cigar box guitar builders. Rigid aluminum (.07")construction.
Clip On Tuner
$8.00
Easy, fast and accurate tuning with MGB's clip on digital tuner.
A4 is 440 HZ
Range: A0 (27.5 HZ) - A6 (1760 HZ)
Back lit display
CR2032 Battery Included
360 Swivel
Easy Connector
from $3.00
The Easy Connector is a quick and easy way to connect electrical components without solder. Strip the wires back 1/4" then press the lever and insert the wire. There are 6 openings along the ground end for connecting all the grounds to a common. There are 4 openings along each side for splicing wires, for example connecting the the hot wire from a pickup to the hotwire on a harness. These spring style connectors provide a solid connection which provide a solid reliable connection. They are sized for 20-24 gauge wires which are commonly used on components.
Easy Floater Bridge
$6.00
This floating Rosewood bridge allows total flexibility in bridge placement. Dimensions are 3 1/2 by 1 1/8 inches and .35 inches tall. The length of the fret wire is 2.4, Suitable for 3,4 and 6 string builds. Can be easily glued in place once optimal location is determined.
Easy Fretter Pre-loaded fretboard
$15.00
The Easy Fretter is a pre loaded and ready to go fretboard that is sized to fit the 2 inch material found at the big box stores. It is made from black composite material.
Ultra smooth satin finished composite fretboard
25 1/2 inch scale
19 3/8 inches long
1 1/2 inches wide
.24 inch thick
Available in Chromatic and Diatonic
21 frets on Chromatic and 13 on Diatonic
Face fret markers on Chromatic
Zero fret installed
Zero fret is .020 taller than other frets
Rosewood string spacer included for either 3 or 4 strings
Use woodworking glue to secure the fretboard to the neck. Strongly encourage using a clamping caul to help keep the neck and fret board straight. The string spacers mount at the end to keep the strings aligned.
Easy Fretter Rosewood Diatonic Pre-loaded fretboard
$17.50
The Easy Fretter is a pre loaded and ready to go fretboard that is sized to fit the 2 inch material found at the big box stores. It is made from Rosewood.
Ultra smooth satin finished composite fretboard
25 1/2 inch scale
19 3/8 inches long
1 1/2 inches wide
.24 inch thick
13 Frets on Diatonic
Zero fret installed
Zero fret is .020 taller than other frets
Rosewood string spacer included for either 3 or 4 strings
Use woodworking glue to secure the fretboard to the neck. Strongly encourage using a clamping caul to help keep the neck and fret board straight. The string spacers mount at the end to keep the strings aligned.
Easy Fretter-Maple or Rosewood fretboard
from $17.50
The Easy Fretter is a pre loaded and ready to go fretboard that is sized to fit the 2 inch material found at the big box stores.
25 1/2 inch scale
19 3/8 inches long
1 1/2 inches wide
.24 inch thick
Available in Maple or Rosewood
21 frets
Face fret markers
Zero fret installed
Zero fret is .020 taller than other frets
Rosewood string spacer included for either 3 or 4 strings
Use woodworking glue to secure the fretboard to the neck. Strongly encourage using a clamping caul to help keep the neck and fret board straight. The string spacers mount at the end to keep the strings aligned.
Easy Neck bridge placement template
$6.00
This template is helpful for locating the bridge when using an Easy Neck.
Always check to confirm 24 inch distance from the front of neck to front the edge of saddle.
Economy Bass Strings
$9.50
High quality bass strings. Strings measure .045, .065, .080 and .100 in diameter.
F Hole Template
$7.00
Traditional and Modern F hole template, includes 8 shapes sized from 3 inches to 7 inches. Use one side for one hole then flip the template for a mirrored shape. Made from 1/8 inch acrylic.