All products
3/4 String Mini Box Bucker Covers
Accessories
Bass Guitar Parts
Best Selling Products
Buy Cigar Box Guitar Parts
Buy Guitar Bridges
Buy one, get 50% off a second one
CBGLife™ Accessories & More
CBGLife™ Hats
Cigar Box Guitar Builders
Cigar Box Guitar Kits
Decorative Hardware For Guitars
Discontinued
Guitar Accessories
Guitar Boxes & Bodies
Guitar Control Plates
Guitar Electronics Parts
Guitar Fretboards
Guitar Input Jacks
Guitar Knobs
Guitar Necks
Guitar Pickups
Guitar Resonator Cone & Cover
Guitar Strap Button
Guitar String Retainers
Guitar Strings
Guitar Tailpieces
Guitar Tools
Guitar Tuners
Made in the USA
MGB CBG Collection
MGB Deals
New Guitar Parts
Newest Products
Ready to Play
Sound Hole Covers
Trim Rings & Covers
Ukulele Guitar Parts
Easy Neck bridge placement template
$6.00
This template is helpful for locating the bridge when using an Easy Neck.
Always check to confirm 24 inch distance from the front of neck to front the edge of saddle.
Economy Bass Strings
$9.50
High quality bass strings. Strings measure .045, .065, .080 and .100 in diameter.
F Hole Template
$7.00
Traditional and Modern F hole template, includes 8 shapes sized from 3 inches to 7 inches. Use one side for one hole then flip the template for a mirrored shape. Made from 1/8 inch acrylic.
Fancy Easy Fretter Rosewood Fretboard
$23.50
NEW Style Easy Fretters! The Easy Fretter is a pre loaded and ready to go fretboard that is sized to fit the 2 inch material found at the big box stores.
25 1/2 inch scale
19 3/8 inches long
1 1/2 inches wide
.24 inch thick
21 frets
Face fret markers
Zero fret installed
Zero fret is .020 taller than other frets
Rosewood string spacer included for either 3 or 4 strings
Use woodworking glue to secure the fretboard to the neck. Strongly encourage using a clamping caul to help keep the neck and fret board straight. The string spacers mount at the end to keep the strings aligned.
Flush Mount Jack and Pot Template
$3.00
This template is used to create and opening for our flush mount jacks. It is also helpful in locating holes for pots.
Four on plate engraved Mandolin Style Tuners
$10.50
Includes one set right and one set left. Nickel plated with white pearloid knobs. Bushings and screws are included, 15 to 1 gear ratio. Shafts are .25 diameter and spaced one inch apart,
Four Pack Zero Frets
$3.00
Included are 4- 3 inch lengths of Jumbo fret wire. These can be placed in the zero fret slot. they are the perfect height when used with medium frets in the remaining slots.
Four String Wraparound Bridge
$14.50
Chrome four string wrap around bridge suitable for cbg builds. Saddles are spaced .6 inches apart and string width at bridge is 1.8 inches. Requires a larger than standard neck, one that is close to 2 inches and the box end.
These bridges are taller than standard bridges requiring the the stagger between the box face and fret height to be near .5 inches. The mounting post allow for fine adjustment to get the action height correct.
Template is included for laying out mounting hole locations. Simply line up the template on the centerline an scale length. Mark the holes and drill with a 12mm drill bit. You can use a smaller bit and file to size. Add backer to make sure top is close to .750 inches thick at the hole position.
Fuente Oscuro Bass (AKA Dreamsicle)
$175.00
MGB kits are made for people with a fundamental knowledge of building stringed instruments. There are many videos available on our Youtube Channel that can provide help. We are also available by phone to help.
Easy to build and fun to play, this new kit from MGB includes everything you need to build this cool 30 inch scale bass.
Kit includes:
16" x 10" Oscuro reinforced, machined and ready to go.
Maple Bass Super neck with Rosewood fretboard. Predrilled for tuners.
Nut is pre-slotted and may need further adjustment
Includes black tuners, strap pins and knobs.
Uses MGB K Nine bass pickup with black cover.
Reinforcement plate and back plate
Short scale MGB bass strings are .045, .065, .085 and .105
Add tuners to headstock and mount neck on body. Install electronics and bridge in predrilled holes. Install strings. Secure the back plate in place.
Assembly available HERE
Ghost Pups with harness
from $17.50
In some builds it is preferred to place the pickup under the lid of the box, this practice is often referred to as "ghosting". Many builders have had good success using the MGB flat pups for these applications. MGB is proud to introduce our new Ghost Pups. These flat pups/harness assemblies are ideal for ghosting. The pickups include a high quality 3M adhesive pad for securing the pup to the lid of the box. They work best if the surface of the box is relatively smooth. Additional adhesive such as E6000 may be needed for rough surfaces.
The harnesses includes volume and tone pots along with a jack. A ground wire for the the bridge and the hardware are also included. 500k pots are used on the double coil pickups and 250k pots are included on the single coil pickups.
The Lucky 13 and Point Five O are stronger pickups and best suited where the distance to the string is greater than 1/4 inch.
Green or All Black Keystone Left
$2.50
Vintage relic style tuner. Drill 5/16 hole 1/4 deep from the front side. Use 1/4 inch drill to drill through the rest of the way. Insert ferrule from the front side and gently tap in place. Install tuner from back side and secure with small screw.
Green or All Black Keystone Right
$2.50
Vintage relic style tuner. Drill 5/16 hole 1/4 deep from the front side. Use 1/4 inch drill to drill through the rest of the way. Insert ferrule from the front side and gently tap in place. Install tuner from back side and secure with small screw.
Grommet Sound Hole Celtic Knot
$6.00
These grommet sound holes provide a creative touch to your build. Simply drill a 2 inch hole and drop the grommet in place. Use E6000 to glue in place. Available in real Cherry or Maple in either a Nickle, Gloss Black or Antique Brass finish.
Grommet Sound Hole Honey Comb
$6.00
These grommet sound holes provide a creative touch to your build. Simply drill a 2 inch hole and drop the grommet in place. Use E6000 to glue in place. Available in real Cherry or Maple in either a Nickle, Gloss Black or Antique Brass finish.
Grommet Sound Hole Sun Ray
$6.00
These grommet sound holes provide a creative touch to your build. Simply drill a 2 inch hole and drop the grommet in place. Use E6000 to glue in place. Available in real Cherry or Maple in either a Nickle, Gloss Black or Antique Brass finish.
Guitar Cable 20 foot long
$12.50
Includes 1/4inch straight and right angle metal connectors, ensures a secure connection to any instrument, pedal, or amp jack.
Pliable 20ft guitar cable protected by high-quality pvc jacket and braided tweed cloth outer jacket, minimzing twisting, kinking and tangling.
Black with gray accent cotton weave outer jacket.
Suitable for mixer, power amplifier, effects pedals, equalizer, electronic organ, electric guitar, electric bass and other electronic equipment.
Hanger Bolt Kit
$5.00
Includes 2 6mm by 2 inch hanger bolts, 4 nuts and 4 washers. Includes a 1.25 inch by 2 inch reinforcement plate
Havoc Three String Kit
$125.00
Kit includes everything needed to complete this attractive 3 string instrument
Included are:
8" x 10\" x 2" box that is fully machined, reinforced and ready for assembly.
24 inch scale Rosewood and Okume fretted neck predrilled for 3 tuners. Neck reinforcement plate is included. String slots on nut are filed
RSG style Micro pup with harness, mounting hardware and knobs.
Black jack plate, black strap pins and back cover plate.
.017, .026 and .036 strings.
Jack Plate
$2.00
1.3 inches by 1.3 inches, with a .37 inch hole. Hardware included
Available in Chrome or Black
K-Nine Bass Flat Pup
$13.00
Made for bass builds and measuring 9 Kohms, these new pickups are wide enough for 4 string bass builds. They will also work for guitar installations. These low-profile pickups are designed specifically for surface mounting on cigar boxes. They eliminate the need for cutting a large hole in the box and slotting the neck. Simply mount on the surface of the box and run the wire through a small hole to connect with the rest of the electronics. Make sure the magnets face the strings. Secure the pickup to the cover with double sided tape, hot melt glue or E6000. Cover not included.
Dimensions are 1.3" wide, 2.75" tall and .25" thick.
Find covers here
K-Nine Bass Flat Pup Covers
from $4.00
These covers are made specifically for the K-Nine bass pickups. they measure 3.65" by 2.0" by .32". Hardware included.
Kit Assembly Charge
$100.00
The MGB team can assemble any of the kits we sell.
Assembly includes:
Carefully assembled by experienced technicians at MGB facility in Florida
Complete setup including setting action height and intonation.
Inspected personally by Mike Breedlove
Careful packaging
To include gig bag, order HERE Bag does not fit 6 string and Bass Builds.
Loaded Bridge
$32.50
Template for string bridge including single coil pickup.
Chrome Finish
Four string
Bottom loading
7.5 K ohm rating
Hardware included
Template
