All products
3/4 String Mini Box Bucker Covers
Accessories
Bass Guitar Parts
Best Selling Products
Buy Cigar Box Guitar Parts
Buy Guitar Bridges
Buy one, get 50% off a second one
CBGLife™ Accessories & More
CBGLife™ Hats
Cigar Box Guitar Builders
Cigar Box Guitar Kits
Decorative Hardware For Guitars
Discontinued
Guitar Accessories
Guitar Boxes & Bodies
Guitar Control Plates
Guitar Electronics Parts
Guitar Fretboards
Guitar Input Jacks
Guitar Knobs
Guitar Necks
Guitar Pickups
Guitar Resonator Cone & Cover
Guitar Strap Button
Guitar String Retainers
Guitar Strings
Guitar Tailpieces
Guitar Tools
Guitar Tuners
Made in the USA
MGB CBG Collection
MGB Deals
New Guitar Parts
Newest Products
Ready to Play
Sound Hole Covers
Templates
Trim Rings & Covers
Ukulele Guitar Parts
Bigfoot Easy Box Double Sided Enclosure
$25.00
MGB Guitars is proud to introduce their Bigfoot Easy Box enclosure. This innovative enclosure has two sides with two distinct uses. One with a sound hole and one with a Bigfoot sound hole. This box was designed and built using the same principles used in acoustic instrument construction. The box is built using purfling and braces to create an incredibly strong and rigid structure. Additional reinforcements were added to key locations to allow when securing bridges. Cover plates are available to cover the sound hole.
Measuring 9 3/4 inches by 7 inches and 2 1/2 thick the box is made from thin ply with a top veneer of Sapele. IT comes in two versions one is unfinished and the other has several coats of spray finish. This box provides a perfect canvass for creating your own piece of musical art. The photo of the box split in two is to show the placement of internal components.
Roughly 7 inches by 9.75 inches
Approximately 2 1/2 inches deep
Acoustic side includes 2 3/8 inch sound hole
The box head is a full 5/8 thick
Multiply construction with Sapele veneer
.
Deluxe Tailpiece 3 and 4 String
$7.50
Painted stainless base
Laser engraved Sapele medallion
Mounting screws included
Easy Neck with Premium Fret Markers
from $60.00
Quality Crafted Guitar Neck | Easy to Install
24 inch Scale
Predrilled headstock with slotted nut available
Perfect for boxes that are 9" long or longer
Suitable for 3,4 and 5 string builds
9/16" thick headstock
Nut is installed but not slotted as standard
1 3/8" width at nut
1 1/2" width at 12th fret
Fretboard length is 17.5"
Overhang is 1 1/8"
Overall length 23 3/4"
Fin, Keys or Snowflake face fret markers are included
Hanger bolt and hardware included
Okume construction with rosewood fingerboard
Headstock tuner template is available
Available with tuner holes drilled and nut filed for either 3 or 4 strings.
The perfect neck for your next build. The Easy Neck is completely finished and ready to go. Simply reinforce your box and bolt the neck on. Solid Okume construction with a rosewood fret board set for 24 inch scale. The neck is meticulously sanded and the Okume portion has a spray finish. The rosewood fret board is unfinished.
The Easy Neck is similar to the Super Neck and installation techniques are the same so the following video applies.
Bridge placement template
Watch This Video:
Bigfoot Easy Box XL Double Sided Enclosure
$27.50
MGB Guitars is proud to introduce their Easy Box XL enclosure. This innovative enclosure has two sides with two distinct uses. One with a sound hole and one with Bigfoot sound hole. This box was designed and built using the same principles used in acoustic instrument construction. The box is built using purfling and braces to create an incredibly strong and rigid structure. Additional reinforcements were added to key locations to allow when securing bridges. Cover plates are available to cover the sound hole.
Measuring 11 1/2 inches by 8 inches and 2 1/2 thick the box is made from thin ply with a top veneer of Sapele. This box provides a perfect canvass for creating your own piece of musical art. The photo of the box split in two is to show the placement of internal components.
Roughly 11 1/2 inches by 8 inches
Approximately 2 3/8 inches deep
Acoustic side includes 2 5/8 inch sound hole
The box head and tail are a full 5/8 thick
Multiply construction with Sapele veneer
.
Loaded Bridge
$32.50
Template for string bridge including single coil pickup.
Chrome Finish
Four string
Bottom loading
7.5 K ohm rating
Hardware included
Template
ST Style Solid Black Trim Ring
$4.00
Quality guitar hardware from MGB Guitars.
The perfect addition to your build. Made to fit around the pickup for a more finished look or to hide any imperfections in the routing. Also comes in many different colors and styles!
Will fit our blade style pickups
Easy Neck Non-Fretted Neck-Rosewood or Maple finger board
from $0.00
Quality Crafted Guitar Neck | Easy to Install
Perfect for boxes that are short as 9" long
Suitable for 3,4 and 5 string builds
9/16" thick headstock
Nut is installed but not slotted
1 3/8" width at nut
1 1/2" width at 12th fret
Fretboard length is 17.5"
Overhang is 1 1/8"
Overall length 23 3/4"
Bone Nut
Hanger bolt and hardware included
Okume construction with Rosewood or Maple fingerboard
Headstock Tuner template is available
The perfect neck for your next build. The EZNeck is completely finished and ready to go. Simply reinforce your box and bolt the neck on. Solid Okume construction with a rosewood or Maple fret board. The neck is meticulously sanded and the Okume portion has a spray finish. The rosewood fret board is unfinished. The EZNeck is similar to the Super Neck and installation techniques are the same so the following video applies.
Bridge placement template
Watch This Video:
Pick Guard Mounting Screws
$22.50
Pick Guard Mounting Screws
Set of 400 Pick Guard Screws
3mm Screws
Versatile screw that can be used in multiple applications
2 color packages available
All Chrome
Mixed Black, Gold, Chrome
Recessed Input Jack
$7.00
MGB Recessed Input Jack
Unique design element
Practical recessed design makes using boxes with thicker walls easier to install
Super Sixer bridge placement template
$6.00
This template is helpful for locating the bridge when using a Super Sixer bolt on neck.
Always check to confirm 25.5 inch distance from the fret side edge of the nut to front the edge of saddle.
ST Style Pearl Trim Ring
$4.00
Quality guitar hardware from MGB Guitars.
The perfect addition to your build. Made to fit around the pickup for a more finished look or to hide any imperfections in the routing. Also comes in many different colors and styles!
Will fit our blade style pickups
License Plate Guitar Kit
$125.00
Easy to assemble kit includes everything needed to build a 3 or 4 string license plate guitar, using your favorite 6x12 inch license plate.
Kit includes:
Reinforced Sapele body specifically made for license plate builds. The body is reinforced and machined with necessary mounting holes for adding components.
Kit includes Deluxe Easy Neck.
Lucky 13 pickup with harness ready to install. Pickup has double sided tape and can be mounted on the back of the license plate near the neck.
Hardware includes tuners, strings, stainless steel tailpiece, knobs, strap pins and screws.
A rosewood bridge that may need to be modified to fit around the letters to obtain the preferred action height.
Assembly is easy:
Mount harness/jack assembly to box. Feed ground wire through small hole where tail piece mounts.
Affix pickup to back side of plate.
Install tuners on headstock, use a small amount of super glue to secure the Rosewood string spacer on at the end of the fretboard just beyond the zero fret.
Mount neck on the body using reinforcement plate and hardware.
Mount plate to box using screws.
Install the tailpiece.
Install strings and only tighten lightly.
Locate the bridge where the fret saddle on the bridge is 24 inches from the nut. Modify the bridge to get the right action height.
Remember the price includes free packing and shipping, a $25 value.
Mini Box Bucker Pickup 8.0 | 6 String | 3-Pack Bundle
$22.50
$58.50
$7.50 each
These low-profile pickups are designed specifically for surface mounting on cigar box guitars. They eliminate the need for cutting a large hole in the box and slotting the neck.
Simply mount on the surface of the box and run the wire through a small hole to connect with the rest of the electronics. 8.8k Pickup. Dimensions are 2.5" wide, 1.65" tall and .23" thick.
Looking for covers? Click HERE for a wide variety of pickup covers.
MGB Spokes 6" Wood Resonator Cover
$8.00
MGB Spokes Wood resonator cover
Laser Cut & engraved from 1/8 inch Baltic Birch Plywood.
Easy to stain or paint. Some sanding required.
8 Holes for mounting screws (Screws included).
Cover Only. Resonator Cone Available HERE
Watch this video!
Bass Nut File Set
$30.00
Perfect for filing bone nuts.
Hobby grade files
.045, .065, .075, .085, .105 &.130
Rubber-coated handles create a firm with comfortable control.
Each file list the two strings that it will work.
Durable and sturdy, will not bend. The perfect tool filing bass nuts to just the right size.
Set strings properly and quickly.
T-Plate template
$10.00
Use this template for marking locations of the 6 mounting holes for the MGB T-Plates. The template also provides location and shape of holes for the pickups. Hot Rail or blades style pickups are used near bridge and a single coil can be used in the neck position.
The template includes notches for lining up with both the center-line of the box and the scale length location.
Made from 1/8 inch acrylic. Product ships with protective mask in place.
Bass Thumb Rest
$5.00
Two pack of Rosewood thumb rests.
2 1/2 by 1/2 by 1/2 inches
Mounting Screws included
Bass Tailpiece
$6.00
Perfect for four strings builds. This oak tailpiece measures 3 x 2 by .25 inches. Holes are .05, .065, '095 and .110 but can be easily enlarged if need
Bridge
White Knob Volume or Tone
$0.75
Quality guitar hardware from MGB Guitars.
Perfect for any style guitar
Plastic construction
White finish
Gibson style look
Pocket Neck Router Template
$7.50
1/4 inch acrylic router template for pocket neck. Also includes small template for marking mounting neck screws.
ST Style Gold Trim Ring
$4.00
Quality guitar hardware from MGB Guitars.
The perfect addition to your build. Made to fit around the pickup for a more finished look or to hide any imperfections in the routing. Also comes in many different colors and styles!
Will fit our blade style pickups
Blue Cat's Eye over Chrome knob
$4.50
Quality guitar hardware from MGB Guitars.
Slip on style
.825 inches tall
.75 diameter
Price per each
Carillo Pledge Box and Neck
$75.00
This kit includes a neck, box, cover plate and neck reinforcement plate ready to assemble. The kit is available in 3 or 4 string models predrilled and ready for MGB enclosed tuners. These are limited addition as we never know if or when we will find additional boxes. Simply add your choice of electronics, tuners and trim pieces to finish. Ghosting a Lucky 13 of Point Five O work well with this combination. The kit includes a 24 inch scale Easy Neck with Maple fretboard drilled for 3 or 4 tuners. Use the neck spacer to raise the neck when using a standard hard tail bridge.
Easy Bridge Placement Template
$5.00
New from MGB, a quick and easy way to precisely position the bridge on your next build. This template will all allow you to mark the proper locations for the mounting holes on your bridge onto the box. It works with standard 3,4 and 6 string bridges. It will also work with MGB 3 string XL bridges.
First mark your box with a centerline then a line for the scale length. Position the template on over these lines. Drill the appropriate holes along with the ground wire hole.
Smoothie Single Coil Pickups -- Buy One Get One HALF OFF
$14.25
Smoothie Single Coil Pickup
New MGB pickup with a signature mat look that is also versatile and can be used for a variety of builds.
Smoothie Single Coil
Ceramic magnet
Works with 3, 4, and 6 string builds
Works with ALL MGB ST trim rings
Perfectly flat top
Mat finish
Comes in 2 colors, white and black
Trim rings sold separately
MGB Seven Fitty Screamin Pickup Birch Ply Cover | 3/4/6 String
$3.00
Designed to work with our MGB Seven Fitty Screamin Pickup
Birch Ply (Sand & Stain Ready)
Includes hardware
Compatible with:
MGB Seven Fitty Screamin Pickup
Tabak Three String Kit
$125.00
Kit includes everything needed to complete this attractive 3 string instrument.
Included are
9" x 8 x 3" box that is fully machined, reinforced and ready for assembly.
24 inch scale Easy Neck Rosewood and Okume fretted neck predrilled for 3 tuners. Neck reinforcement plate is included. String slots on nut are filed
Micro Pup with cover , mounting hardware and knobs.
Black tuners, bridge, strap pins and back cover.
Includes a black jack plate.
Includes a 3 pack of .017, .026 and .036 strings.
Use a 7/16 inch deep well socket for the neck hanger bolt and a 10 mm socket or wrench to tighten tuner ferules.
Remember the price includes free packing and shipping, a $25 value.
Assembly available HERE
MGB Bucks (Select Amount) | Store Gift Card
from $20.00
Shopping for someone else but not sure what to give them? Give them the gift of choice with a MGB Guitars & Parts Supplier gift card.
Gift cards are delivered by email and contain instructions to redeem them at checkout. Our gift cards have no additional processing fees.
