Best Selling Cigar Box Guitar Parts – Page 15

Kit includes everything needed to complete this attractive 3 string instrument. Available in three or four string. Available in chrome, black or antique brass finishes. Included are: 10" x 6.5" x 2.5" colorful box that is fully machined, reinforced and ready for assembly. 24 inch scale Okume and Maple fretted neck predrilled for three tuners. Neck reinforcement plate is included. String slots on nut are filed but may require minimal adjustments after assembly. Powered by an MGB 750 pickup. Pickup is pre-soldered to harness and ready for easy assembly. Includes tuners, knobs and strap pins, Includes a jack plate and back cover plate. Includes a 3 pack of .013, .017 and .026 strings. Use a 7/16" socket or wrench to tighten hanger bolt and and 10 mm socket or wrench to tighten tuner ferules.

Add to cart

9 Volt Preamp/Equalizer Kit $21.00

Preamp/equalizer 9v (battery not included) Mounting hardware included Cable Piezo Includes template/trim ring with screws Includes jack plate, drill 1 inch clearance hole Includes modified ukulele saddle Works perfectly with all MGB ukulele kits Preamp/Equalizer router template

Mandolin Style Bridge $11.00

Walnut Adjustable 8 strings Compensated

Blue Cat's Eye over Chrome knob $4.50

Quality guitar hardware from MGB Guitars. Slip on style .825 inches tall .75 diameter Price per each

MGB Big 6 Acoustic Medium Kit | 3 Pack $24.00

Quality Acoustic Guitar Strings | Made in the USA Steel & Phosphor Bronze Wound 6 String Acoustic Pack 13/17/26/35/46/56 About 44" in length Includes a 3-pack of each string Made in the USA

Acoustic Steel 0.013 | 3 Pack $3.25

BD Acoustic Steel 0.013 3 Pack Quality Acoustic Guitar Strings | Made in the USA Steel 0.013 Gauge About 44" in length 3 Pack Made in the USA

Sold out

Chickenhead Knob $4.00

Push on style 10 pack

Easy Connector from $3.00

The Easy Connector is a quick and easy way to connect electrical components without solder. Strip the wires back 1/4" then press the lever and insert the wire. There are 6 openings along the ground end for connecting all the grounds to a common. There are 4 openings along each side for splicing wires, for example connecting the the hot wire from a pickup to the hotwire on a harness. These spring style connectors provide a solid connection which provide a solid reliable connection. They are sized for 20-24 gauge wires which are commonly used on components.

Add to cart

Reamer $25.00

MGB Reamer is made from high quality material and allows precision tapering of bridge pin holes. Standard reamer dimensions T-handle design Suitable to taper pot and switch holes Not suitable for bridge pin holes

MGB Gears 6" Wood Resonator Cover $8.00

MGB Gears 6" Wood Resonator Cover Laser Cut & engraved from 1/8 inch Baltic Birch Plywood. Easy to stain or paint. Some sanding required. 8 Holes for mounting screws (Screws included). Want the matching gear sound hole covers? Click HERE Cover Only. Resonator Cone Available HERE Watch this video!

Fat Bottom Rings $25.00

Includes two rings for adding thickness to the Fat Bottom Body.

MGB Dots 6" Wood Resonator Cover $8.00

MGB Dots 6" Wood Resonator Cover Laser Cut & engraved from 1/8 inch Baltic Birch Plywood. Easy to stain or paint. Some sanding required. 8 Holes for mounting screws (Screws included). Cover Only. Resonator Cone Available HERE Watch this video!

U-Bass Kit with Box $125.00

This kit does include a box. This kit includes all the items needed to build a 20 (see note below on intonation) inch scale electric U-Bass. The neck is made of Okume and the fret board and bridge are made of Walnut. The boxes are made from Sapele and well reinforced for this application. Polyurethane strings are provided as well as a bone nut that is fitted to the strings. The neck includes a preinstalled hanger bolt for mounting to the box. The heavy duty tuners are made specifically for this type of instrument. Unlike other tuners you will need to disassemble the tuner to install it in head stock. Remove the screw, gear and axle before installing the tuner body. Reassemble and and add washer and ferrule. Tighten with a 15mm wrench. Normal string winders will not work and we suggest you use our 24010 winder which will accommodate the oversized knobs on these tuners. Due to the mass and size of the strings we have found that a scale length of 20.3 inches works better for intonation. The strings are anchored on the bridge using knots on the inside of the box. The bridge can be glued to the box however we prefer using screws and finish washers. The electronics package includes a compensated piezo pickup, preamp/equalizer, tuner and battery box. Openings for the preamp and battery box are included. The battery box uses two 2032 (not included) round batteries which are installed positive side up. A plug will need to be installed in the jack for the tuner to operate. Tune to EADG. Special note: As the strings are soft and the leading edge of the nut is quite sharp, oftentimes the strings will bind on the nut and the gears will grind till they fail. The solution is to lift the strings over the nut as you tighten the tuners If you need help feel free to call Eric at 727 212 7221 Check online for videos on installing U-Bass strings.

Add to cart

Flush Mount Jack and Pot Template $3.00

This template is used to create and opening for our flush mount jacks. It is also helpful in locating holes for pots.

Tailpiece Maple or Rosewood 3 or 4 string from $3.00

Perfect for securing strings to the end of the box. Available in Rosewood or Maple Approximately 1/4 inch thick Available in 3 or 4 string Hardware included

Add to cart

Steel Guitar Slide $9.50

Stainless Steel Highly Polished

MGB 2.75" H x 6" W Decal $6.00

Put your MGB pride on display! Measures 2.75"H x 6"W. Available in black and white. MGB Logo Decal Available in black and white Safe for vehicles

Add to cart

Super Sixer Bolt on Neck $75.00

Quality Crafted Guitar Neck | Easy to Install 25.5 inch Scale Suitable for 6 string builds Head stock is pre-drilled for tuners 22 frets installed and nicely finished Truss rod installed 0.6" thick headstock 1 5/8" width at nut 2" width at 12th fret Overall length 25 3/4" Top and side fret markers are included Plastic slotted Nut Hanger bolt is installed and hardware is included 1/8 inch fret board shim is included as well as thin back angle shim Box should be 10 inches in length Maple construction with rosewood fingerboard Bridge placement template The perfect neck for your next six string build. The neck is completely finished and ready to go. Simply reinforce your box and bolt the neck on. The finger board is radiused just like high end guitar necks. Solid maple construction with a rosewood fret board set for 25.5 inch scale. The neck is meticulously sanded and the maple portion has a spray finish. The rosewood fret board is unfinished. Watch This Video:

Acoustic Phosphor Bronze Wound 0.056 | 3 Pack $6.00

Quality Acoustic Guitar Strings | Made in the USA Steel 0.056 Gauge About 44" in length 3 Pack Made in the USA

MGB Sopranissimo Ukulele Bridge Placement Template $7.50

Helpful template for placing bridge in perfect alignment with the neck. Check and confirm scale length of 11.5 inches at center of saddle. • 1/8" Acrylic Watch This Video:

Preamp Marking/Router Template $5.00

Works for the Tuner/Preamp or the 9 volt preamp Suggest using Amana Tool's 47222 router bit

CBGLIFE 4.5" H x 10" W Decal $12.50

Put your CBG pride on display! Measures 4.5"H x 10"W. Available in black and white. CBGLIFE Decal Available in black and white Safe for vehicles

Add to cart

Sold out

Four on plate engraved Mandolin Style Tuners $10.50

Includes one set right and one set left. Nickel plated with white pearloid knobs. Bushings and screws are included, 15 to 1 gear ratio. Shafts are .25 diameter and spaced one inch apart,

Bridge Pin/ End Pin/Saddle Kit $5.00

Quality guitar hardware from MGB Guitars. Plastic Saddle is compensated

Easy Fretter Rosewood Diatonic Pre-loaded fretboard $17.50

The Easy Fretter is a pre loaded and ready to go fretboard that is sized to fit the 2 inch material found at the big box stores. It is made from Rosewood. Ultra smooth satin finished composite fretboard 25 1/2 inch scale 19 3/8 inches long 1 1/2 inches wide .24 inch thick 13 Frets on Diatonic Zero fret installed Zero fret is .020 taller than other frets Rosewood string spacer included for either 3 or 4 strings Use woodworking glue to secure the fretboard to the neck. Strongly encourage using a clamping caul to help keep the neck and fret board straight. The string spacers mount at the end to keep the strings aligned.

Add to cart

Sold out

ST Style White Trim Ring $4.00

Quality guitar hardware from MGB Guitars. The perfect addition to your build. Made to fit around the pickup for a more finished look or to hide any imperfections in the routing. Also comes in many different colors and styles! Will fit our blade style pickups

ST Style Blue Trim Ring $4.00

Quality guitar hardware from MGB Guitars. The perfect addition to your build. Made to fit around the pickup for a more finished look or to hide any imperfections in the routing. Also comes in many different colors and styles! Will fit our blade style pickups

Super Sixer bridge placement template $6.00

This template is helpful for locating the bridge when using a Super Sixer bolt on neck. Always check to confirm 25.5 inch distance from the fret side edge of the nut to front the edge of saddle.

Bass Nut File Set $30.00

Perfect for filing bone nuts. Hobby grade files .045, .065, .075, .085, .105 &.130 Rubber-coated handles create a firm with comfortable control. Each file list the two strings that it will work. Durable and sturdy, will not bend. The perfect tool filing bass nuts to just the right size. Set strings properly and quickly.

Find anything you need

Best Selling Products

SIGN ME UP