All products
3/4 String Mini Box Bucker Covers
Accessories
Bass Guitar Parts
Best Selling Products
Buy Cigar Box Guitar Parts
Buy Guitar Bridges
Buy one, get 50% off a second one
CBGLife™ Accessories & More
CBGLife™ Hats
Cigar Box Guitar Builders
Cigar Box Guitar Kits
Decorative Hardware For Guitars
Discontinued
Guitar Accessories
Guitar Boxes & Bodies
Guitar Control Plates
Guitar Electronics Parts
Guitar Fretboards
Guitar Input Jacks
Guitar Knobs
Guitar Necks
Guitar Pickups
Guitar Resonator Cone & Cover
Guitar Strap Button
Guitar String Retainers
Guitar Strings
Guitar Tailpieces
Guitar Tools
Guitar Tuners
Made in the USA
MGB CBG Collection
MGB Deals
New Guitar Parts
Newest Products
Sound Hole Covers
Trim Rings & Covers
Ukulele Guitar Parts
Easy Neck Diatonic 24 inch Scale
$45.00
Quality Crafted Guitar Neck | Easy to Install
24 inch Scale
Perfect for boxes that are 9" long
Suitable for 3,4 and 5 string builds
9/16" thick headstock
Nut is installed but not slotted
1 3/8" width at nut
1 1/2" width at 12th fret
Fretboard length is 17.5"
Overhang is 1 1/8"
Overall length 23 3/4"
Face fret markers are included
Fret board shim included
Bone Nut
Hanger bolt and hardware included Use 10MM socket or wrench.
Okume construction with rosewood fingerboard
Headstock Tuner template is available
The perfect neck for your next build. The Easy Neck is completely finished and ready to go. Simply reinforce your box and bolt the neck on. Solid Okume construction with a rosewood fret board set for 24 inch scale. The neck is meticulously sanded and the Okume portion has a spray finish. The rosewood fret board is unfinished. The Easy Neck is similar to the Super Neck and installation techniques are the same so the following video applies.
Bridge placement template
Watch This Video:
2 Pack Easy Box Unfinished Double Sided Enclosure
$30.00
$39.00
MGB Guitars is proud to introduce their Easy Box enclosure. This innovative enclosure has two sides with two distinct uses. One with a sound hole and one with out. This box was designed and built using the same principles used in acoustic instrument construction. The box is built using purfling and braces to create an incredibly strong and rigid structure. Additional reinforcements were added to key locations to allow when securing bridges. Cover plates are available to cover the sound hole when it is on the back side.
Measuring 9 3/4 inches by 7 inches and 2 1/2 thick the box is made from thin ply with a top veneer of unfinished Sapele. This box provides a perfect canvass for creating your own piece of musical art. The photo of the box split in two is to show the placement of internal components.
Roughly 7 inches by 9.75 inches
Approximately 2 1/2 inches deep
Acoustic side includes 2 3/8 inch sound hole
The box head is a full 5/8 thick
Multiply construction with Sapele veneer
.
License Plate Kit
$150.00
Easy to assemble kit includes everything needed to build a 3 or 4 string license plate guitar, using your favorite 6x12 inch license plate.
Kit includes:
Reinforced Sapele body specifically made for license plate builds. The body is reinforced and machined with necessary mounting holes for adding components.
Kit includes Super Neck. See here.
Lucky 13 pickup with harness ready to install. Pickup has double sided tape and can be mounted on the back of the license plate near the neck.
Hardware includes tuners, strings, stainless steel tailpiece, knobs, strap pins and screws.
An oak bridge that may need to modified to fit around the letters to obtain the preferred action height.
Assembly is easy:
Mount harness/jack assembly to box. Feed black ground wire through small hole where tail piece mounts.
Affix pickup to back side of plate.
Install tuners on headstock, use a small amount of super glue to secure the Rosewood string spacer on at the end of the fretboard just beyond the zero fret.
Mount neck on the body using reinforcement plate and hardware.
Mount plate to box using screws and finish washers.
Install the tailpiece.
Install strings and only tighten lightly.
Jumbo Black Knob with Blue accent
$6.50
Quality guitar hardware from MGB Guitars.
Set Screw style, wrench included
.8 inches tall
1.5 diameter
Price per each
La Gloria Cubana Kit
$75.00
Kit includes box, neck, reinforcement plate and back cover plate. The attractive box which measures 9 x 8 1/2 by 2 1/4 inches has a faux rosewood finish and is predrilled for neck and cover plate. The kit is available in 3 and 4 string versions. The box is long enough to allow use of standard hardtail bridges. The neck is a Deluxe Easy Neck with Rosewood fretboard. It is a 24 inch scale neck with 22 frets. This kit is ready for you to add your favorite tuners, electronics, strings and hardware. Neck includes spacer to lift the fretboard to allow the strings to pass over the Mini Box Bucker covers. You might want to use a shim on your bridge as well.
MGB Tron 6" Wood Resonator Cover
$8.00
Cut from 1/8 inch Baltic Birch Plywood. Easy to stain or paint. Some sanding required.
Cover Only. Resonator Cone Available HERE
Watch this video!