All products
3/4 String Mini Box Bucker Covers
Accessories
Bass Guitar Parts
Best Selling Products
Buy Cigar Box Guitar Parts
Buy Guitar Bridges
Buy one, get 50% off a second one
CBGLife™ Accessories & More
CBGLife™ Hats
Cigar Box Guitar Builders
Cigar Box Guitar Kits
Decorative Hardware For Guitars
Discontinued
Guitar Accessories
Guitar Boxes & Bodies
Guitar Control Plates
Guitar Electronics Parts
Guitar Fretboards
Guitar Input Jacks
Guitar Knobs
Guitar Necks
Guitar Pickups
Guitar Resonator Cone & Cover
Guitar Strap Button
Guitar String Retainers
Guitar Strings
Guitar Tailpieces
Guitar Tools
Guitar Tuners
Made in the USA
MGB CBG Collection
MGB Deals
New Guitar Parts
Newest Products
Sound Hole Covers
Trim Rings & Covers
Ukulele Guitar Parts
MGB Sunburst 6" Wood Resonator Cover
$8.00
MGB Sunburst 6" Wood Resonator Cover
Laser Cut & engraved from 1/8 inch Baltic Birch Plywood.
Easy to stain or paint. Some sanding required.
8 Holes for mounting screws (Screws included).
Cover Only. Resonator Cone Available HERE
Watch this video!
Easy Connector
from $3.00
The Easy Connector is a quick and easy way to connect electrical components without solder. Strip the wires back 1/4" then press the lever and insert the wire. There are 6 openings along the ground end for connecting all the grounds to a common. There are 4 openings along each side for splicing wires, for example connecting the the hot wire from a pickup to the hotwire on a harness. These spring style connectors provide a solid connection which provide a solid reliable connection. They are sized for 20-24 gauge wires which are commonly used on components.
9 Volt Preamp/Equalizer Kit
$21.00
Preamp/equalizer 9v (battery not included)
Mounting hardware included
Cable Piezo
Includes template/trim ring with screws
Includes jack plate, drill 1 inch clearance hole
Includes modified ukulele saddle
Works perfectly with all MGB ukulele kits
Preamp/Equalizer router template
Blue Cat's Eye over Chrome knob
$4.50
Quality guitar hardware from MGB Guitars.
Slip on style
.825 inches tall
.75 diameter
Price per each
Bass Thumb Rest
$5.00
Two pack of Rosewood thumb rests.
2 1/2 by 1/2 by 1/2 inches
Mounting Screws included
MGB Big 6 Acoustic Medium Kit | 3 Pack
$24.00
Quality Acoustic Guitar Strings | Made in the USA
Steel & Phosphor Bronze Wound
6 String Acoustic Pack
13/17/26/35/46/56
About 44" in length
Includes a 3-pack of each string
Made in the USA
Acoustic Steel 0.013 | 3 Pack
$3.25
BD Acoustic Steel 0.013 3 Pack
Quality Acoustic Guitar Strings | Made in the USA
Steel
0.013 Gauge
About 44" in length
3 Pack
Made in the USA
Flush Mount Jack and Pot Template
$3.00
This template is used to create and opening for our flush mount jacks. It is also helpful in locating holes for pots.
Reamer
$25.00
MGB Reamer is made from high quality material and allows precision tapering of bridge pin holes.
Standard reamer dimensions
T-handle design
Suitable to taper pot and switch holes
Not suitable for bridge pin holes
MGB Gears 6" Wood Resonator Cover
$8.00
MGB Gears 6" Wood Resonator Cover
Laser Cut & engraved from 1/8 inch Baltic Birch Plywood.
Easy to stain or paint. Some sanding required.
8 Holes for mounting screws (Screws included).
Want the matching gear sound hole covers? Click HERE
Cover Only. Resonator Cone Available HERE
Watch this video!
Tailpiece Maple or Rosewood 3 or 4 string
from $3.00
Perfect for securing strings to the end of the box.
Available in Rosewood or Maple
Approximately 1/4 inch thick
Available in 3 or 4 string
Hardware included
U-Bass Kit with Box
$125.00
This kit does include a box. This kit includes all the items needed to build a 20 (see note below on intonation) inch scale electric U-Bass. The neck is made of Okume and the fret board and bridge are made of Walnut. The boxes are made from Sapele and well reinforced for this application. Polyurethane strings are provided as well as a bone nut that is fitted to the strings. The neck includes a preinstalled hanger bolt for mounting to the box.
The heavy duty tuners are made specifically for this type of instrument. Unlike other tuners you will need to disassemble the tuner to install it in head stock. Remove the screw, gear and axle before installing the tuner body. Reassemble and and add washer and ferrule. Tighten with a 15mm wrench. Normal string winders will not work and we suggest you use our 24010 winder which will accommodate the oversized knobs on these tuners.
Due to the mass and size of the strings we have found that a scale length of 20.3 inches works better for intonation. The strings are anchored on the bridge using knots on the inside of the box. The bridge can be glued to the box however we prefer using screws and finish washers.
The electronics package includes a compensated piezo pickup, preamp/equalizer, tuner and battery box. Openings for the preamp and battery box are included. The battery box uses two 2032 (not included) round batteries which are installed positive side up. A plug will need to be installed in the jack for the tuner to operate. Tune to EADG.
Special note: As the strings are soft and the leading edge of the nut is quite sharp, oftentimes the strings will bind on the nut and the gears will grind till they fail. The solution is to lift the strings over the nut as you tighten the tuners
If you need help feel free to call Eric at 727 212 7221
Check online for videos on installing U-Bass strings.
MGB Dots 6" Wood Resonator Cover
$8.00
MGB Dots 6" Wood Resonator Cover
Laser Cut & engraved from 1/8 inch Baltic Birch Plywood.
Easy to stain or paint. Some sanding required.
8 Holes for mounting screws (Screws included).
Cover Only. Resonator Cone Available HERE
Watch this video!
Super Sixer Bolt on Neck
$75.00
Quality Crafted Guitar Neck | Easy to Install
25.5 inch Scale
Suitable for 6 string builds
Head stock is pre-drilled for tuners
22 frets installed and nicely finished
Truss rod installed
0.6" thick headstock
1 5/8" width at nut
2" width at 12th fret
Overall length 25 3/4"
Top and side fret markers are included
Plastic slotted Nut
Hanger bolt is installed and hardware is included
1/8 inch fret board shim is included as well as thin back angle shim
Box should be 10 inches in length
Maple construction with rosewood fingerboard
Bridge placement template
The perfect neck for your next six string build. The neck is completely finished and ready to go. Simply reinforce your box and bolt the neck on. The finger board is radiused just like high end guitar necks. Solid maple construction with a rosewood fret board set for 25.5 inch scale. The neck is meticulously sanded and the maple portion has a spray finish. The rosewood fret board is unfinished.
Watch This Video:
MGB 2.75" H x 6" W Decal
$6.00
Put your MGB pride on display!
Measures 2.75"H x 6"W. Available in black and white.
MGB Logo Decal
Available in black and white
Safe for vehicles
Preamp Marking/Router Template
$5.00
Works for the Tuner/Preamp or the 9 volt preamp
Suggest using Amana Tool's 47222 router bit
Acoustic Phosphor Bronze Wound 0.056 | 3 Pack
$6.00
Quality Acoustic Guitar Strings | Made in the USA
Steel
0.056 Gauge
About 44" in length
3 Pack
Made in the USA
MGB Sopranissimo Ukulele Bridge Placement Template
$7.50
Helpful template for placing bridge in perfect alignment with the neck. Check and confirm scale length of 11.5 inches at center of saddle.
• 1/8" Acrylic
Watch This Video:
Easy Fretter Rosewood Diatonic Pre-loaded fretboard
$17.50
The Easy Fretter is a pre loaded and ready to go fretboard that is sized to fit the 2 inch material found at the big box stores. It is made from Rosewood.
Ultra smooth satin finished composite fretboard
25 1/2 inch scale
19 3/8 inches long
1 1/2 inches wide
.24 inch thick
13 Frets on Diatonic
Zero fret installed
Zero fret is .020 taller than other frets
Rosewood string spacer included for either 3 or 4 strings
Use woodworking glue to secure the fretboard to the neck. Strongly encourage using a clamping caul to help keep the neck and fret board straight. The string spacers mount at the end to keep the strings aligned.
CBGLIFE 4.5" H x 10" W Decal
$12.50
Put your CBG pride on display!
Measures 4.5"H x 10"W. Available in black and white.
CBGLIFE Decal
Available in black and white
Safe for vehicles
Four on plate engraved Mandolin Style Tuners
$10.50
Includes one set right and one set left. Nickel plated with white pearloid knobs. Bushings and screws are included, 15 to 1 gear ratio. Shafts are .25 diameter and spaced one inch apart,
Bridge Pin/ End Pin/Saddle Kit
$5.00
Quality guitar hardware from MGB Guitars.
Plastic
Saddle is compensated
Super Sixer bridge placement template
$6.00
This template is helpful for locating the bridge when using a Super Sixer bolt on neck.
Always check to confirm 25.5 inch distance from the fret side edge of the nut to front the edge of saddle.
ST Style White Trim Ring
$4.00
Quality guitar hardware from MGB Guitars.
The perfect addition to your build. Made to fit around the pickup for a more finished look or to hide any imperfections in the routing. Also comes in many different colors and styles!
Will fit our blade style pickups
ST Style Blue Trim Ring
$4.00
Quality guitar hardware from MGB Guitars.
The perfect addition to your build. Made to fit around the pickup for a more finished look or to hide any imperfections in the routing. Also comes in many different colors and styles!
Will fit our blade style pickups
Bass Nut File Set
$30.00
Perfect for filing bone nuts.
Hobby grade files
.045, .065, .075, .085, .105 &.130
Rubber-coated handles create a firm with comfortable control.
Each file list the two strings that it will work.
Durable and sturdy, will not bend. The perfect tool filing bass nuts to just the right size.
Set strings properly and quickly.
2 Pack Easy Box Unfinished Double Sided Enclosure
$30.00
$39.00
MGB Guitars is proud to introduce their Easy Box enclosure. This innovative enclosure has two sides with two distinct uses. One with a sound hole and one with out. This box was designed and built using the same principles used in acoustic instrument construction. The box is built using purfling and braces to create an incredibly strong and rigid structure. Additional reinforcements were added to key locations to allow when securing bridges. Cover plates are available to cover the sound hole when it is on the back side.
Measuring 9 3/4 inches by 7 inches and 2 1/2 thick the box is made from thin ply with a top veneer of unfinished Sapele. This box provides a perfect canvass for creating your own piece of musical art. The photo of the box split in two is to show the placement of internal components.
Roughly 7 inches by 9.75 inches
Approximately 2 1/2 inches deep
Acoustic side includes 2 3/8 inch sound hole
The box head is a full 5/8 thick
Multiply construction with Sapele veneer
.
Easy Neck Diatonic 24 inch Scale
$45.00
Quality Crafted Guitar Neck | Easy to Install
24 inch Scale
Perfect for boxes that are 9" long
Suitable for 3,4 and 5 string builds
9/16" thick headstock
Nut is installed but not slotted
1 3/8" width at nut
1 1/2" width at 12th fret
Fretboard length is 17.5"
Overhang is 1 1/8"
Overall length 23 3/4"
Face fret markers are included
Fret board shim included
Bone Nut
Hanger bolt and hardware included Use 10MM socket or wrench.
Okume construction with rosewood fingerboard
Headstock Tuner template is available
The perfect neck for your next build. The Easy Neck is completely finished and ready to go. Simply reinforce your box and bolt the neck on. Solid Okume construction with a rosewood fret board set for 24 inch scale. The neck is meticulously sanded and the Okume portion has a spray finish. The rosewood fret board is unfinished. The Easy Neck is similar to the Super Neck and installation techniques are the same so the following video applies.
Bridge placement template
Watch This Video:
