Newest Products

Versatile, full bodied pickup for all styles. Works great in the neck or bridge. Low noise and wide tonal range. Dimensions: 2.75" x .70'" and .50" tall. Works great as a neck or bridge pickup Low noise 9.0K Rating Note: Also available with our push pull pot harness. This allows you to easily move from a single coil pickup to a humbucker by simply pushing or pulling the tone knob. Soldered sealed and tested. This is our favorite setup at MGB Guitars.

Add to cart

Economy 3-Way Volume/Tone/Jack Harness $7.00

Includes 250 or 500k volume pot and matching tone pot with .047 mfd cap. Harness includes the ground wire for bridge and leads for connection to pickup or piezo. Includes a 3-way installed switch. Mounting hardware included. 500k volume pot 500k tone pot .047 mfd cap Watch this video!

Add to cart

MGB Pickup Router Template $29.50

Get a Perfect pickup cut out every time! No need to worry over dimensions! Creates precise openings without mistakes. Speeds up your building process. MGB Guitars & Parts Supplier is proud to introduce a revolutionary tool that can help builders accurately and quickly create openings for pickups. When used with a router and a Freud 50-98 bit the template will create a perfectly sized opening. The template includes a pattern for most pickups in the MGB line. Avoid mistakes and ensure a perfect cut every time. Watch this video!

Spacer Plate for 4 String Bridges $1.50

This bridge shim is intended for use with 4 string hardtail bridges. This allows for increasing the height of the string on your build!

Spacer Plate for 3 String Bridges $1.50

This bridge shim is intended for use with 3 string hardtail bridges. This allows for increasing the height of the string on your build!

Add to cart

MGB Fat Bottom F-Hole & Box Bucker Pickup Pre-Cut Top $15.00

Note: current Fat Bottom kits do not include the neck notches. This is an optional top to use with our MGB Fat Bottom Guitar Body Kit with pre-cut f-holes and MGB "Box Bucker Gen 2" holes. Ready for sanding and finishing. Current product does not include the slot at the top. Note: Pickup is not included. Compatible with the following pickups: MGB "Box Bucker Gen 2" Humbucker | 3 String Pickup MGB "Box Bucker Gen 2" Humbucker | 4 String Pickup

MGB Fat Bottom F-Hole Pre-Cut Top $15.00

Note: current Fat Bottom kits do not include the neck notches. This is an optional top to use with our MGB Fat Bottom Guitar Body Kit with pre-cut f-holes. Ready for sanding and finishing. Current product does not include the slot at the top.

MGB Fat Bottom Guitar Body Kit $45.00

Note: current Fat Bottom kits do not include the neck notches. MGB Guitars is proud to introduce its Fat Bottom guitar body kit. This is the same body that MGB has used to create his unique cigar box mosaic guitars. Measuring roughly 12 inches by 16 inches the kit includes a 1/4 top panel, two ¾ inch thick center rings and a 1/4 inch bottom panel that includes pilot holes on the back side should you wish to mount with screws. Current product does not include the slot at the top. Approximately 2” in depth/thickness. Shaped more like a traditional guitar this blank box provides a perfect canvass for creating your own piece of art. Check out the gallery of pictures to see what Mike and others have done with these bodies. Veteran Made in the USA Roughly 12 inches by 16 inches Includes a 1/4 top panel with a cut out for a 1 ½ inch neck, two ¾ inch thick center rings and a 1/4 inch bottom panel Approximately 2” in depth/thickness. Includes pilot holes on the back side to mount with screws Plywood construction with birch veneer Note: Sanding & Assembly of this kit is required. Assembly Tips for the MGB Fat Bottom Body Kit: To assemble the 2 inner rings, we recommend applying a generous amount of wood glue on the top of the "inner bottom" layer, apply the "inner top" layer over top of it, and use several clamps to tightly hold in place. Be sure to wipe any excess glue away. Let the glue dry fully before removing from clamps. If the cigar box mosaic look is something you are interested in, this is how we lay it out. After you decide where each piece is going to be placed, use wood glue to apply to the top. The back panel is lined with pre-drilled holes so that you can screw to the inner rings. You can wood glue the back as well if you prefer not to use screws, simply flip the back panel over so that the pre-drilled holes are facing inside and out of view.

ST Style Solid Black Trim Ring $4.00

Quality guitar hardware from MGB Guitars. The perfect addition to your build. Made to fit around the pickup for a more finished look or to hide any imperfections in the routing. Also comes in many different colors and styles! Will fit our blade style pickups

Piezo w/16" Lead & Jack | 35mm / 1-3/8" Disc $4.00

Heavy duty industrial grade piezo disc. Defined solder pads makes soldering easier and minimizes damages. This has been our favorite piezo for many years and used on a large quantity of our builds. 35mm discs / 1-38" diameter 16" Lead Pre-installed Jack w/ Hardware

MGB Micro Pup 3/4 String Single Coil Flat Pickup $10.00

These low-profile pickups are designed specifically for surface mounting on cigar box guitars. They eliminate the need for cutting a large hole in the box and slotting the neck. Simply mount on the surface of the box and run the wire through a small hole to connect with the rest of the electronics. This pickup is rated at 3k, so it's nice and hot for guitar installations! Make sure the magnets face the strings. Dimensions: 1.7" x .96" with a thickness of .23" Covers not included, find covers here.

MGB Micro Pup Cover Aluminum Stamped Plated Black | 3/4 Stringk $3.00

Designed to work with our MGB Micro Pup 3/4 String Single Coil Flat Pickup Dimensions: 1.4" x 2.7" with a thickness of .25" Black finish Includes black hardware Compatible with: MGB Micro Pup 3/4 String Single Coil Flat Pickup

MGB Micro Pup Cover Aluminum Stamped Plated Gold | 3/4 String $3.00

Designed to work with our MGB Micro Pup 3/4 String Single Coil Flat Pickup Dimensions: 1.4" x 2.7" with a thickness of .25" Gold finish Includes gold hardware Compatible with: MGB Micro Pup 3/4 String Single Coil Flat Pickup

MGB Micro Pup Cover Aluminum Stamped | 3/4 String $3.00

Designed to work with our MGB Micro Pup 3/4 String Single Coil Flat Pickup Dimensions: 1.4" x 2.7" with a thickness of .25" Satin Finish Includes chrome hardware Compatible with: MGB Micro Pup 3/4 String Single Coil Flat Pickup

Single Pickup with Cover $8.50

Introducing our single pickup - designed for single stringers or diddley bows. Comes with hardware and also includes a nice wood cover. About 1 inch tall and 1 inch in diameter. This pickup is rated at 1.9k

MGB Mini Box Bucker Cover Aluminum Stamped Plated Black | 3/4 String $4.00

Designed to work with our 3/4 String Mini Box Bucker Pickups. Aluminum stamped Plated black finish Includes black hardware Compatible with: MGB Mini Box Bucker Pickup 2.0 | 3/4 String MGB Mini Box Bucker Pickup 4.0 | 3/4 String

MGB Mini Box Bucker Cover Aluminum Stamped Plated Gold | 3/4 String $4.00

Designed to work with our 3/4 String Mini Box Bucker Pickups. Aluminum stamped Plated gold finish Includes gold hardware Compatible with: MGB Mini Box Bucker Pickup 2.0 | 3/4 String MGB Mini Box Bucker Pickup 4.0 | 3/4 String

MGB Mini Box Bucker Cover Aluminum Stamped Chrome | 3/4 String

MGB Mini Box Bucker Cover Aluminum Stamped| 3/4 String $4.00

Designed to work with our 3/4 String Mini Box Bucker Pickups. Aluminum stamped Satin Finish Includes chrome hardware Compatible with: MGB Mini Box Bucker Pickup 2.0 | 3/4 String MGB Mini Box Bucker Pickup 4.0 | 3/4 String

MGB Mini Box Bucker Stamped Cover Gold | 6 String $4.00

Designed to work with our 6 String Mini Box Bucker pickup. (Pickup not included) Stamped copper gold plated cover Includes gold hardware Dimensions: 3.45" x 2" x .39" Compatible with: MGB Mini Box Bucker Pickup 8.0 | 6 String

MGB Mini Box Bucker Aluminum Stamped Cover Black | 6 String $4.00

Designed to work with our 6 String Mini Box Bucker Pickup 8.0. (Pickup not included) Aluminum cover Includes black hardware Compatible with: MGB Mini Box Bucker Pickup 8.0 | 6 String

MGB Mini Box Bucker Stamped Aluminum Cover | 6 String $4.00

Designed to work with our 6 String Mini Box Bucker pickup. (Pickup not included) Aluminum cover Includes chrome hardware Compatible with: MGB Mini Box Bucker Pickup 8.0 | 6 String

MGB Mini Box Bucker Pickup 8.0 | 6 String $13.00

These low-profile pickups are designed specifically for surface mounting on cigar box guitars. They eliminate the need for cutting a large hole in the box and slotting the neck. Simply mount on the surface of the box and run the wire through a small hole to connect with the rest of the electronics. 8.8k Pickup. Dimensions are 2.5" wide, 1.65" tall and .23" thick. Covers not included, find 6 string covers here.

MGB Rosewood Bridge w/Bone | 3/4 String $3.50

Excellent floating bridge for 3 or 4 string applications. Light sanding required. Overall height with nut is .375". Dimensions: 2" x 1.25" x .25" Rosewood & Bone Pre-assembled

3-Pack Piezo 35mm / 1-3/8" Disc $4.50

Heavy duty industrial grade piezo disc. Defined solder pads makes soldering easier and minimizes damages. This has been our favorite piezo for many years and used on a large quantity of our builds. 3 pack 35mm discs / 1-38" diameter Solder pads

6 String Pre-Cut Bone Nut $5.00

Gold Decorative Protective Corner 2 $4.50

Decorative protective box corners not only add a unique more finished look but also protect your instrument. Comes with 8 corners and matching hardware Gold finish

Black Decorative Protective $4.50

Decorative protective box corners not only add a unique more finished look but also protect your instrument. Comes with 8 corners and matching hardware Black finish

Standard Guitar Jack with Shielded 12” Lead $3.00

Standard jack w/ shielded single conductor lead. Standard jack 12" lead Single conductor wire

20-Pack Small Tie Wraps 3" $1.50

Small tie wraps for wire management. 3" length. 20 per pack.

10-Pack Large Heat Shrink Tubing 3/16” x 1" $1.50

Perfect for heat shrinking two single conductor small wires. 10-pack Black color Measures 3/16” x 1.75 "

10-Pack Small Heat Shrink Tubing 1/8” x 1” $1.50

Perfect for heat shrinking two single conductor small wires. 10-pack Black color Measures 1/8" x 1.125"

Deco Style Tuner | Right | Chrome or Black $3.25

Deco style tuner in chrome or black designed for any type of guitar. Reliable, no-frills design. 16 to 1 ratio. Hardware included. Sold as singles. Fits .6 inch thick headstock

Add to cart

Find anything you need

SIGN ME UP