Newest Products

MGB Recessed Input Jack Unique design element Practical recessed design makes using boxes with thicker walls easier to install

Paint Can Lid Trim Ring $7.00

MGB paint can lid trim ring Trim ring fits used with MGB paint can lid reso Trim ring also used as template to make the perfect cutout for the paint can lid Available in two colors, maple and walnut

Add to cart

6 String Pre-Cut Acoustic Bone Nut $5.00

Mini Top Hat Knob $1.00

MGB Mini Top Hat Knob Smaller than standard knob Fits standard v/t pots Lower profile and shorter width allow unobtrusive access to v/t

Wire Harness with Volume/Tone/Blending $5.50

MGB wire harness for multiple pickups with volume/tone/blending allows infinite pickup placement and broader range of sound and tone. Presoldered v/t/blending pots and input jack Wire harness designed for multi pickup set up

Reamer $25.00

MGB Reamer is made from high quality material and allows precision tapering of bridge pin holes. Standard reamer dimensions T-handle design Suitable to taper pot and switch holes Not suitable for bridge pin holes

Nut string spacing template $5.00

Use this template for marking locations of string slots on the nut. Has suggested locations for both 3 and 4 string builds.

MGB Ukulele Black Tuner Set of 4 $6.00

Set of 4 ukulele enclosed tuners, black finish. For 1/2" headstock thickness. Two Right Tuners & 2 Left Tuners. Recommend using the MGB 10mm Tuner Drill Bit for drilling the opening.

MGB 3” Cover Plate Finished Walnut $2.00

Walnut 3 inch cover plate with hardware.

MGB 3” Cover Plate Finished Cherry $2.00

Cherry 3 inch cover plate with hardware.

MGB 3” Cover Plate Finished Maple $2.00

Maple 3 inch cover plate with hardware.

MGB Tenor Ukulele Bridge Placement Template $7.50

Helpful template for placing bridge in perfect alignment with the neck. • 1/8" acrylic board Watch This Video:

MGB Super Neck/ Easy Neck Headstock Tuner Hole Template $7.50

Makes bridge placement a breeze This acrylic template is specifically made for use with the Super Necks and Easy Necks. Provides a template for laying out tuner holes. The large number of holes provide ultimate flexibility in laying out holes for tuners as need for each build. Warning: make sure to check spacing if tuners are placed closely on one side.

MGB Super Neck Template $7.50

Makes bridge placement a breeze This template is specifically made for use with the Super Neck. Provides a the right location for a 3 or 4 string hard tail bridge. Always check to make sure the scale length is 25.5".

MGB Super Neck-Maple and Rosewood Neck | 25.5 inch Scale w zero fret $70.00

Quality Crafted Guitar Neck | Easy to Install 25.5 inch Scale Includes zero fret and zero fret string spacers for 3 and 4 strings Suitable for 3,4 and 5 string builds 0.6" thick headstock 1 3/8" width at nut 1 3/4" width at 12th fret Top and side fret markers are included Bone Nut Hanger bolt and hardware included Hanger bolts are installed. Maple construction with rosewood fingerboard Note: these neck now include a zero fret to aid in getting perfect action height. Make sure to notch the bone nut to align strings. Strings should rest fully on the zero nut, see pics. The perfect neck for your next build. The Super Neck is completely finished and ready to go. Simply reinforce your box and bolt the neck on. Solid maple construction with a rosewood fret board set for 25.5 inch scale. The neck is meticulously sanded and the maple portion has a spray finish. The rosewood fret board is unfinished. Watch This Video:

10 Pack Mini Knob Inserts $2.50

Molded plastic knob suitable for all knob applications. Fits snugly and securely on standard pots. Part is .47 inches long and measures .44 on the large end and .397 on the small end. Fits nicely in 45 and 44 casings and also fits in a 410 shotgun shell. Plastic

MGB Tenor Ukulele Guitar Kit from $42.50

Minimum box length is 9 inches. Includes 17 inch scale neck that is sanded and finished. Neck has hanger bolt and hardware for easy mounting on any box. Frets and fret board installed, includes bone nut. Four high quality enclosed tuners with hardware. Rosewood bridge with bone saddle and two filler plugs. Four labeled nylon strings. Ukulele Kit Includes: Neck w/hanger bolt & hardware 4 Enclosed Tuners (2 left & 2 right) & tuner hardware Nylon strings (labeled) Rosewood bridge w/bone saddle (two filler plugs) Note: Box/body not included! Watch This Video: Watch This Video:

Add to cart

4-String Formed Tailpiece | Stainless Steel $5.50

Stainless steel formed stainless steel tailpiece made for 4 string cigar box guitars or other homemade instruments. Stainless steel construction Made specifically for 4 string cigar box guitars or other homemade instruments

3-String Formed Tailpiece | Stainless Steel $5.50

Stainless steel formed stainless steel tailpiece made for 3 string cigar box guitars or other homemade instruments. Stainless steel construction Made specifically for 3 string cigar box guitars or other homemade instruments

MGB 3” Cover Plate Birch $1.50

Birch 3 inch cover plate with hardware.

10 Pack 1/4” Economy Jack | Chrome $7.50

Quality guitar hardware from MGB Guitars. Chrome finish

MGB Soprano Ukulele Bridge Placement Template $7.50

Helpful template for placing bridge in perfect alignment with the neck. • 1/8" Acrylic Watch This Video:

MGB Soprano Ukulele Kit from $35.00

Minimum box length is 9 inches. Includes 13.5 inch scale neck that is sanded and finished. Neck has hanger bolt and hardware for easy mounting on any box. Frets and real Rosewood fret board installed, includes pre-slotted nut. Four high quality enclosed tuners with hardware. Rosewood bridge with saddle and two filler plugs. Four labeled nylon strings. Watch the Concert Ukulele kit video but make sure to check for 13.5 inch scale length. Ukulele Kit Includes: Neck w/hanger bolt & hardware 4 Enclosed Tuners (2 left & 2 right) & tuner hardware Nylon strings (labeled) Rosewood bridge w/bone saddle (two filler plugs) Note: Box/body not included! Watch This Video: Watch This Video:

Add to cart

Zippy 3 String Neck | 20 Inch Scale from $40.00

Quality Crafted Guitar/Ukulele Neck | Install Ready Easy to Install 20 Inch Scale 19 Frets 3 String Ready Sanded, Finished and ready to use Overall Length 19” Nut and Tuners Included, Some Assembly Required Hardwood Construction with Rosewood Fingerboard Ready to go out of the box. Solid hardwood construction with a synthetic fret board. The neck is sanded and has a spray finish. The Rosewood fret board is unfinished. The overall length is 16 inches and the fret board overhangs the neck by 2-3/4 inches. The neck is 1-3/8 inches wide at the nut and 1 -7/8 inches wide at other end. The nut is set to the right height. Mounting is easy using the hanger style bolt.

Add to cart

Zippy 4 String Neck | 20 Inch Scale from $40.00

Quality Crafted Guitar Neck | Install Ready Easy to Install 20 Inch Scale 19 Frets 4 String Ready Sanded, Finished and ready to use Overall Length 19" Pre-slotted Nut, Some Assembly Required Available with Chrome, Gold or Black tuners. Hardwood Construction with Rosewood Fingerboard Ready to go out of the box. Solid hardwood construction with a synthetic fret board. The neck is sanded and has a spray finish. The Rosewood fret board is unfinished. The overall length is 16 inches and the fret board overhangs the neck by 2-3/4 inches. The neck is 1-3/8 inches wide at the nut and 1 -7/8 inches wide at other end. The nut is set to the right height and is pre-slotted. Mounting is easy using the hanger style bolt.

Add to cart

Shotgun Shell Knob Insert Pair $3.00

Shotgun shell knob inserts. Add your shotgun shell to your desired build! These bottle cap knob inserts can be easily used with any used 12 gauge shotgun shell. We suggest using Gorilla Glue. Note: Shotgun shell not included. Includes 2 shotgun shell inserts.