Newest Products

Minimum box length is 9 inches, box not included. Includes 8 string17 inch scale neck that is sanded and finished. Neck has hanger bolt and hardware for easy mounting on any box. Frets and fret board installed, includes slotted bone nut. Include a right and left tuner set with hardware. Rosewood bridge with bone saddle and two filler plugs. Four labeled nylon strings. Ukulele Kit Includes: Neck w/hanger bolt, reinforcement plate & hardware One right and one left tuners with hardware  Set of 8 strings for ukulele.  Rosewood bridge w/bone saddle (two filler plugs) Building this kit is very similar to all of our other ukulele kits. Please note that with 8 strings the tension is more that double that of a standard ukulele neck. Make sure to have a solid box with reinforcements as necessary. Scale length of 17 inches from inside edge of nut to center of saddle must be maintained. Our standard Tenor template will not work with this kit, use the 8 string template found here. Assembly available HERE This kit pairs well with the 9 Volt preamp (not included).       Watch This Video: Watch This Video:

Quality Crafted Guitar Neck | Easy to Install 24 inch Scale Perfect for boxes that are 9" long Suitable for 3,4 and 5 string builds 9/16" thick headstock Nut is installed but not slotted 1 3/8" width at nut 1 1/2" width at 12th fret Fretboard length is 17.5" Overhang is 1 1/8" Overall length 23 3/4" Face fret markers are included Fret board shim included Bone Nut Hanger bolt and hardware included Use 10MM socket or wrench. Okume construction with rosewood fingerboard Headstock Tuner template is available The perfect neck for your next build. The Easy Neck is completely finished and ready to go. Simply reinforce your box and bolt the neck on. Solid Okume construction with a rosewood fret board set for 24 inch scale. The neck is meticulously sanded and the Okume portion has a spray finish. The rosewood fret board is unfinished. The Easy Neck is similar to the Super Neck and installation techniques are the same so the following video applies.   Bridge placement template Watch This Video:

This template is used to create and opening for our flush mount jacks. It is also helpful in locating holes for pots.

Quality guitar hardware from MGB Guitars. Chrome finish

MGB kits are made for people with a fundamental knowledge of building stringed instruments. There are many videos available on our Youtube Channel that can provide help. We are also available by phone to help.  MGB kits are made to order and can take a few extra days to prepare. They may ship in a few days or could take up to a week. Kit includes everything needed to complete this attractive resonator style box instrument. Available in three or four string. Although this is a little more complicated build we are here to help, just give us a call. Included are: 11" x 7" x 2.5" aluminum box that is fully machined, reinforced and ready for assembly. 24 inch scale Okume and Maple Deluxe Easy Neck predrilled for  three or four tuners. Neck reinforcement plate is included. String slots on nut are filed but may require minimal adjustments after assembly. Powered by an MGB 4.0 Mini Box Bucker pickup. Pickup is pre-soldered to harness and ready for easy installation. Includes tuners, knobs and strap pins. Resonator cone, cover, biscuit bridge with several shims for final action adjustment. Includes a 3 pack of .013, .017 .026 or .013, .017 .026 and .036 strings. Use a 7/16" socket or wrench to tighten hanger bolt and and 10 mm socket or wrench to tighten tuner ferules.  Assembly available HERE Also available in Brass/Gold. Click HERE Remember the price includes free packing and shipping, a $25 value.

Perfect for securing strings to the end of the box. Available in Rosewood or Maple Approximately 1/4 inch thick Available in 3 or 4 string Hardware included

This template is helpful for locating the bridge when using a Super Sixer bolt on neck. Always check to confirm 25.5 inch distance from the fret side edge of the nut to front the edge of saddle.

Quality Crafted Guitar Neck | Easy to Install 25.5 inch Scale Suitable for 6 string builds Head stock is pre-drilled for tuners 22 frets installed and nicely finished Truss rod installed 0.6" thick headstock 1 5/8" width at nut 2" width at 12th fret Overall length 25 3/4" Top and side fret markers are included Plastic slotted Nut Hanger bolt is installed and hardware is included 1/8 inch fret board shim is included as well as thin back angle shim Box should be 10 inches in length Maple construction with rosewood fingerboard Bridge placement template The perfect neck for your next six string build. The neck is completely finished and ready to go. Simply reinforce your box and bolt the neck on. The finger board is radiused just like high end guitar necks. Solid maple construction with a rosewood fret board set for 25.5  inch scale. The neck is meticulously sanded and the maple portion has a spray finish. The rosewood fret board is unfinished. Watch This Video:

The Easy Connector is a quick and easy way to connect electrical components without solder. Strip the wires back 1/4" then press the lever and insert the wire. There are 6 openings along the ground end for connecting all the grounds to a common. There are 4 openings along each side for splicing wires, for example connecting the the hot wire from a pickup to the hotwire on a harness. These spring style connectors provide a solid connection which provide a solid reliable connection. They are sized for 20-24 gauge wires which are commonly used on components.

The Easy Fretter is a pre loaded and ready to go fretboard that is sized to fit the 2 inch material found at the big box stores. 25 1/2 inch scale 19 3/8 inches long 1 1/2 inches wide  .24 inch thick Available in Maple or Rosewood 21 frets Face fret markers  Zero fret installed  Zero fret is .020 taller than other frets Rosewood string spacer included for either 3 or 4 strings Use woodworking glue to secure the fretboard to the neck. Strongly encourage using a clamping caul to help keep the neck and fret board straight. The string spacers mount at the end to keep the strings aligned. 

1/4 inch acrylic router template for pocket neck. Also includes small template for marking mounting neck screws.

1/4 inch acrylic router template for pocket neck. Also includes small template for marking mounting neck screws.

Preamp/equalizer 9v (battery not included) Mounting hardware included Cable Piezo Includes template/trim ring with screws Includes jack plate, drill 1 inch clearance hole Includes modified ukulele saddle Works perfectly with all MGB ukulele kits Preamp/Equalizer router template

Works for the Tuner/Preamp or the 9 volt preamp Suggest using Amana Tool's 47222 router bit

Walnut Adjustable 8 strings Compensated

In some builds it is preferred to place the pickup under the lid of the box, this practice is often referred to as "ghosting". Many builders have had good success using the MGB flat pups for these applications.  MGB is proud to introduce our new Ghost Pups. These flat pups/harness assemblies are ideal for ghosting. The pickups include a high qualit adhesive pad for securing the pup to the lid of the box. They work best if the surface of the box is relatively smooth. Additional adhesive such as E6000 may be needed for rough surfaces. The harnesses includes volume and tone pots along with a jack. A ground wire for the the bridge and the hardware are also included.  500k pots are used on the double coil pickups and 250k pots are included on the single coil pickups. The Lucky 13s are stronger pickups and best suited where the distance to the string is greater than 1/4 inch.

Push on style 10 pack

3 ply black with white center.  Screws included Two Pack

Provides template for cutout for Loaded Bridge.

Template for string bridge including single coil pickup.  Chrome Finish Four string Bottom loading 7.5 K ohm rating  Hardware included  Template   

Quality guitar hardware from MGB Guitars. Set Screw style, wrench included .8 inches tall 1.5 diameter Price per each  

Quality guitar hardware from MGB Guitars. Set Screw style, wrench included .8 inches tall 1.5 diameter Price per each  

Quality guitar hardware from MGB Guitars. Slip on style .825 inches tall .75 diameter Price per each  

Quality guitar hardware from MGB Guitars. Slip on style .825 inches tall .75 diameter Price per each  

Quality guitar hardware from MGB Guitars. Slip on style .825 inches tall .75 diameter Price per each  

Deco style tuner in chrome or black designed for any type of guitar. Reliable, no-frills design. 16 to 1 ratio. Hardware included. Sold as singles.  Fits .6 inch thick headstock  

Decorative protective box corners not only add a unique more finished look but also protect your instrument. Comes with 8 corners and matching hardware Antique Brass finish

Measuring 1.4 inches wide, .3 inches all and .2 inches thick these nuts are well suited for ukuleles and other builds with thinner fretboards. They are available blank, three or four string slots.

Two way action can correct either a backbow or upbow on a neck.  Twin steel rods and brass threaded blocks allow for precise adjustments to get the perfect alignment on the neck. 4mm hex wrench included. We suggest creating a slot about .25 inches wide .5 inches deep in the neck. Make sure the slot is deep enough so that fretboard does not rest on the brass nuts. Also use a dab of E6000 or silicone caulk under each nut to prevent them from moving, do not glue the rods. The slot should be long enough to conceal the adjustment nut under the neck and/or nut.

These covers are made specifically for the K-Nine bass pickups. they measure 3.65" by 2.0" by .32". Hardware included. Shim available here.