All products
3/4 String Mini Box Bucker Covers
Accessories
Bass Guitar Parts
Best Selling Products
Buy Cigar Box Guitar Parts
Buy Guitar Bridges
Buy one, get 50% off a second one
CBGLife™ Accessories & More
CBGLife™ Hats
Cigar Box Guitar Builders
Cigar Box Guitar Kits
Decorative Hardware For Guitars
Discontinued
Guitar Accessories
Guitar Boxes & Bodies
Guitar Control Plates
Guitar Electronics Parts
Guitar Fretboards
Guitar Input Jacks
Guitar Knobs
Guitar Necks
Guitar Pickups
Guitar Resonator Cone & Cover
Guitar Strap Button
Guitar String Retainers
Guitar Strings
Guitar Tailpieces
Guitar Tools
Guitar Tuners
Made in the USA
MGB CBG Collection
MGB Deals
New Guitar Parts
Newest Products
Ready to Play
Sound Hole Covers
Trim Rings & Covers
Ukulele Guitar Parts
Electric Steel 0.017 | 3 Pack
$3.50
Quality Electric Guitar Strings | Made in the USA
Steel
0.017 Gauge
About 44" in length
3 Pack
Made in the USA
F Hole Template
$7.00
Traditional and Modern F hole template, includes 8 shapes sized from 3 inches to 7 inches. Use one side for one hole then flip the template for a mirrored shape. Made from 1/8 inch acrylic.
Fancy Easy Fretter Rosewood Fretboard
$23.50
NEW Style Easy Fretters! The Easy Fretter is a pre loaded and ready to go fretboard that is sized to fit the 2 inch material found at the big box stores.
25 1/2 inch scale
19 3/8 inches long
1 1/2 inches wide
.24 inch thick
21 frets
Face fret markers
Zero fret installed
Zero fret is .020 taller than other frets
Rosewood string spacer included for either 3 or 4 strings
Use woodworking glue to secure the fretboard to the neck. Strongly encourage using a clamping caul to help keep the neck and fret board straight. The string spacers mount at the end to keep the strings aligned.
Faux Striker Plate Tailpiece
$4.50
Replica tailpiece.
Plated Steel Chrome or Black Chrome
For 3 and 4 string installations
Includes hardware
Includes strap pin pocket
Filligree Easy Box XL Enclosure
$32.00
Measuring 12 inches by 8 inches and 2 1/2 thick the box is made from thin ply with a top veneer of Sapele. Attractive filigree pattern is laser engraved in top. Box includes matching back cover and control plate.
Roughly 12 inches by 8 inches
Approximately 2 3/8 inches deep
The box head is a full 5/8 thick
Multiply construction with Sapele veneer
.
Five String Bass Bridge | Chrome or Black
$15.00
5 string bridge for bass guitar
Chrome or black finish
16.5 mm string spacing
Easy Bridge Placement Template HERE
Flange Jack | Black
$5.00
Quality guitar hardware from MGB Guitars. Connect ground to long tab with barbs and connect hot to shortest terminal.
Black finish
Flange Jack | Chrome
$5.00
Quality guitar hardware from MGB Guitars. Connect ground to long tab with barbs and connect hot to shortest terminal.
Chrome finish
Flange Jack | Gold
$6.00
Quality guitar hardware from MGB Guitars. Connect ground to long tab with barbs and connect hot to shortest terminal.
Gold finish
Fleur Floating Bridge with Piezo
$12.50
Floating bridge with cable Piezo and Saddle.
Works with guitars, ukuleles and other instruments
Includes cable piezo
Works perfectly with MGB Preamp/Tuner
Available in Maple or Cherry
Genuine bone saddle
Made for 2,3 or 4 string instruments
Flush Mount Jack and Pot Template
$3.00
This template is used to create and opening for our flush mount jacks. It is also helpful in locating holes for pots.
Four on plate engraved Mandolin Style Tuners
$10.50
Includes one set right and one set left. Nickel plated with white pearloid knobs. Bushings and screws are included, 15 to 1 gear ratio. Shafts are .25 diameter and spaced one inch apart,
Four Pack Zero Frets
$3.00
Included are 4- 3 inch lengths of Jumbo fret wire. These can be placed in the zero fret slot. they are the perfect height when used with medium frets in the remaining slots.
Four String Bass Bridge | Chrome or Black
from $12.00
4 string bridge for bass guitar
Chrome or black finish
19mm string spacing on chrome 20mm on black
Easy Bridge Placement Template HERE
Four String Wraparound Bridge
$14.50
Chrome four string wrap around bridge suitable for cbg builds. Saddles are spaced .6 inches apart and string width at bridge is 1.8 inches. Requires a larger than standard neck, one that is close to 2 inches and the box end.
These bridges are taller than standard bridges requiring the the stagger between the box face and fret height to be near .5 inches. The mounting post allow for fine adjustment to get the action height correct.
Template is included for laying out mounting hole locations. Simply line up the template on the centerline an scale length. Mark the holes and drill with a 12mm drill bit. You can use a smaller bit and file to size. Add backer to make sure top is close to .750 inches thick at the hole position.
Fret Alignment Gauge
$7.00
Easily and quickly identify problem frets.
More accurate frets make for better playability.
4 different lengths of measurement.
Made of stainless steel with a durable finish.
Quickly and accurately identify problem frets for repair. The quality of the frets dramatically affect playability for most players. This is an essential tool for every builder workshop or guitar tech alike.
Fret File
$15.00
Shape fret ends perfectly!
35 degree angle
7 inches long
Hardened file dresses frets perfectly
No-slip, comfortable Birch body for excellent gripping power.
Simplifies fret shaping to save time and provide uniform and consistent shape on fret ends
Fret Hammer
$5.00
One Of THE Essential Tools For Working On Guitar Necks
Works great with stainless steel frets
Sturdy build
Comfortable grip handle
One of the most important tools when it comes to fretting a neck. Lightweight - meaning more precision where it counts. The sturdy build, comfort grip, and low price make this a must-have for the workshop if getting into fretwork is even a possibility.
