Products

Includes the following: 3- 1/4-20 by 3 inch hanger bolts 3- 6mm by 2 inch Phillips head hanger bolts with 2 nuts 6- washers 1- 1/4-20 hanger bolt driver

Havoc Three String Kit $125.00

Kit includes everything needed to complete this attractive 3 string instrument Included are: 8" x 10" x 2" box that is fully machined, reinforced and ready for assembly. 24 inch scale Rosewood and Okume fretted neck predrilled for 3 tuners. Neck reinforcement plate is included. String slots on nut are filed RSG style Micro pup with harness, mounting hardware and knobs. Black jack plate, black strap pins and back cover plate. .017, .026 and .036 strings.

Imitation Pearl Fret Markers $3.00

Imitation pearl fret markers are 1/4 inch in diameter. Easy to install. Mark locations for markers. Drill shallow hole using 1/4 inch flat bottom or brad point drill bit. Test drill depth on a scrap piece of wood. Glue markers in place using super glue. Carefully sand to finished height. If you drill too deep you can stack two markers to fix the problem. Imitation Pearl 10-Pack 1/4" Diameter

Jack Plate $2.00

1.3 inches by 1.3 inches, with a .37 inch hole. Hardware included Available in Chrome or Black

Add to cart

Jumbo Black Knob $6.00

Quality guitar hardware from MGB Guitars. Set Screw style, wrench included .8 inches tall 1.5 diameter Price per each

Jumbo Black Knob with Blue accent $6.50

Quality guitar hardware from MGB Guitars. Set Screw style, wrench included .8 inches tall 1.5 diameter Price per each

K-Nine Bass Flat Pup $13.00

Made for bass builds and measuring 9 Kohms, these new pickups are wide enough for 4 string bass builds. They will also work for guitar installations. These low-profile pickups are designed specifically for surface mounting on cigar boxes. They eliminate the need for cutting a large hole in the box and slotting the neck. Simply mount on the surface of the box and run the wire through a small hole to connect with the rest of the electronics. Make sure the magnets face the strings. Secure the pickup to the cover with double sided tape, hot melt glue or E6000. Cover not included. Dimensions are 1.3" wide, 2.75" tall and .25" thick. Find covers here

K-Nine Bass Flat Pup Covers from $4.00

These covers are made specifically for the K-Nine bass pickups. they measure 3.65" by 2.0" by .32". Hardware included.

Add to cart

Kit Assembly Charge $100.00

The MGB team can assemble any of the kits we sell. Assembly includes: Carefully assembled by experienced technicians at MGB facility in Florida Complete setup including setting action height and intonation. Inspected personally by Mike Breedlove Careful packaging To include gig bag, order HERE Bag does not fit 6 string and Bass Builds.

Kuba Deluxe $125.00

Kit includes everything needed to complete this attractive 3/4 string instrument. Included are: 11" x 7.5" x 2" box that is fully machined, reinforced and ready for assembly. 24 inch scale Easy Neck Rosewood and Okume fretted neck predrilled for 3 of 4 tuners. Neck reinforcement plate is included. String slots on nut are filed Micro Pup with Black cover, mounting hardware and white knobs. Black tuners, bridge, strap pins. Includes a 3 pack of .017, .026 and .036 or .013, .017, .026 and .036 strings. Use a 10 mm deep well socket for the neck hanger bolt and a 10 mm socket or wrench to tighten tuner ferules. Assembly available HERE

Add to cart

LA Aroma De Cuba $95.00

Kit includes everything needed to complete this attractive 3/4 string instrument. Included are: 11" x 6.5" x 2" box that is fully machined, reinforced and ready for assembly. 24 inch scale Deluxe Easy Neck Rosewood and Okume fretted neck predrilled for 3 of four tuners. Neck reinforcement plate is included. String slots on nut are filed Micro Pup with Gold cover, mounting hardware and white knobs. Gold tuners, bridge, strap pins. Includes a 3 pack of .017, .026 and .036 or .013, .017, .026 and .036 strings. Use a 10 mm deep well socket for the neck hanger bolt and a 10 mm socket or wrench to tighten tuner ferules. Assembly available HERE

Add to cart

License Plate Kit $150.00

Easy to assemble kit includes everything needed to build a 3 or 4 string license plate guitar, using your favorite 6x12 inch license plate. Kit includes: Reinforced Sapele body specifically made for license plate builds. The body is reinforced and machined with necessary mounting holes for adding components. Kit includes Super Neck. See here. Lucky 13 pickup with harness ready to install. Pickup has double sided tape and can be mounted on the back of the license plate near the neck. Hardware includes tuners, strings, stainless steel tailpiece, knobs, strap pins and screws. An oak bridge that may need to modified to fit around the letters to obtain the preferred action height. Assembly is easy: Mount harness/jack assembly to box. Feed black ground wire through small hole where tail piece mounts. Affix pickup to back side of plate. Install tuners on headstock, use a small amount of super glue to secure the Rosewood string spacer on at the end of the fretboard just beyond the zero fret. Mount neck on the body using reinforcement plate and hardware. Mount plate to box using screws and finish washers. Install the tailpiece. Install strings and only tighten lightly.

Add to cart

Lip stick Pick-up Trim $2.00

New from MGB, trim rings made specifically for MGB Lipstick Pick-ups. Available in several finishes MGB Lipstick Single Coil Pick-ups here

Add to cart

Loaded Bridge $32.50

Template for string bridge including single coil pickup. Chrome Finish Four string Bottom loading 7.5 K ohm rating Hardware included Template

Loaded Bridge Template $5.00

Provides template for cutout for Loaded Bridge.

Lucky 13 Flat Pup $15.00

In some builds it is preferred to place the pickup under the lid of the box, this practice is often referred to as "ghosting". Many builders have had good success using the MGB Mini Box Buckers for these applications. MGB is proud to introduce our new Lucky 13 flat pup designed for ghosting. By adding more wire and strengthening the magnetic field we have a solid solution. These new pickups measure 13k ohms plus. We have found in testing that the pickups work well when the distance from the pickup to the strings is .5". Make sure the magnets face the strings. Measuring 2.56" by 1.6" and .3" thick, these pickups can be used on 3,4 and 6 string builds. Works with our 6 string Boxbucker covers. View all available covers here.

Sold out

Mandolin Kit $60.00

This kit includes everything needed to build a Mandolin except for the body. The neck is Okume with a Walnut fretboard. Binding and face and side fret markers are included. The scale length is 13 3/4 inches. The neck also includes a truss rod. A compensated and adjustable Walnut bridge is included along with a chrome tailpiece. Tuners and a truss rod cover are included. Four pairs of stings are provided including .012, .016, .026 and .032 sizes. Tuning is GDAE. Note: Keep in mind the tension created by 8 strings is substantial, all boxes will need additional reinforcement to handle the added stress. Make sure the top where the neck is connected is thick (close to 1/2" is ideal) and rigid. You will note that two hanger bolts are used to provide and solid connection between the neck and the box.

Mandolin Style Tailpiece $4.00

Mandolin style steel tailpiece made for 8 string cigar box mandolins or other homemade instruments. Chrome plated steel construction Hardware included The wide selection of string clips provides lots of flexibility for different instruments.

Sold out

Maple Fret Board | 25.5" Scale $9.50

Beautiful High Quality Maple 0.25 inches thick 19 inches long 1.63 inches wide at the narrow end 2.25 inches wide at the wide end 25.5 inch scale length Suitable for 3 or 4 or 6 string applications Perfect for builders who want to build their necks but want a precisely made finger board. Check the length of the fretboard at the 12th fret down from nut end, it should measure 12 3/4 inches. Trim at nut end as needed.

Sold out

MGB "Box Bucker Gen 2 Humbucker | 3 String Pickup from $25.00

Our 2nd generation humbucker pickup specifically designed for use in cigar box guitars & homemade instruments! The best just got better, we listened to our customers and made some improvements. The cover and frame are now rosewood, we have also added a black fiber baseplate to add strength and style. We still use Alnico 5 magnets which add more focus and enhanced dynamics. Enamel-coated magnet wire delivers warm vintage-style tones. These pickups available in 3 and 4 string configuration measure 8.8k. This new model also includes wiring for split coils for those wanting to separate the coils. Another quality guitar pickup from MGB Guitars. Black wire is hot, green/braid is ground and red/white are where the coils connect. Note: Also available with our push pull pot harness. This allows you to easily move from a single coil pickup to a humbucker by simply pushing or pulling the tone knob. Soldered sealed and tested. This is our favorite setup at MGB Guitars. Quality Guitar Pickup by MGB Guitars Specifically designed for cigar box guitars & homemade instruments. Rosewood cover and trim ring No noise sound Alnico 5 magnets Rosewood / Carbon Fiber Construction Watch Video: Audio Sample of MGB Box Bucker Gen 2

MGB "Box Bucker Gen 2 Humbucker | 4 String Pickup from $26.00

Our 2nd generation humbucker pickup specifically designed for use in cigar box guitars! The best just got better, we listened to our customers and made some improvements. The cover and frame are now rosewood, we have also added a black fiber baseplate to add strength and style. We still use Alnico 5 magnets which add more focus and enhanced dynamics. Enamel-coated magnet wire delivers warm vintage-style tones. These pickups available in 3 and 4 string configuration measure 8.8k. This new model also includes wiring for split coils for those wanting to separate the coils. Another quality guitar pickup from MGB Guitars. Black wire is hot, green/braid is ground and red/white are where the coils connect. Quality Guitar Pickup by MGB Guitars Specifically designed for cigar box guitars Rosewood cover and trim ring No noise sound Alnico 5 magnets Note: Also available with our push pull pot harness. This allows you to easily move from a single coil pickup to a humbucker by simply pushing or pulling the tone knob. Soldered sealed and tested. This is our favorite setup at MGB Guitars. Watch Video: Audio Sample of MGB Box Bucker Gen 2

Add to cart

MGB 2.75" H x 6" W Decal $6.00

Put your MGB pride on display! Measures 2.75"H x 6"W. Available in black and white. MGB Logo Decal Available in black and white Safe for vehicles

Add to cart

MGB 3 String Acoustic Heavy Kit | 3 Pack $15.00

MGB 3 String Acoustic Heavy Kit Quality Acoustic Guitar Strings | Made in the USA Phosphor Bronze Wound Heavy 3 String Acoustic Pack 26/35/46 About 44" in length Includes a 3-pack of each string Made in the USA

MGB 3 String Acoustic Lite Kit | 3 Pack $9.00

Quality Acoustic Guitar Strings | Made in the USA Steel & Phosphor Bronze Wound Lite 3 String Acoustic Pack 13/17/26 About 44" in length Includes a 3-pack of each string Made in the USA

MGB 3 String Acoustic Medium Kit | 3 Pack $12.00

Quality Acoustic Guitar Strings | Made in the USA Steel & Phosphor Bronze Wound Medium 3 String Acoustic Pack 17/26/35 About 44" in length Includes a 3-pack of each string Made in the USA