All products
3/4 String Mini Box Bucker Covers
Accessories
Bass Guitar Parts
Best Selling Products
Buy Cigar Box Guitar Parts
Buy Guitar Bridges
Buy one, get 50% off a second one
CBGLife™ Accessories & More
CBGLife™ Hats
Cigar Box Guitar Builders
Cigar Box Guitar Kits
Decorative Hardware For Guitars
Discontinued
Guitar Accessories
Guitar Boxes & Bodies
Guitar Control Plates
Guitar Electronics Parts
Guitar Fretboards
Guitar Input Jacks
Guitar Knobs
Guitar Necks
Guitar Pickups
Guitar Resonator Cone & Cover
Guitar Strap Button
Guitar String Retainers
Guitar Strings
Guitar Tailpieces
Guitar Tools
Guitar Tuners
Made in the USA
MGB CBG Collection
MGB Deals
New Guitar Parts
Newest Products
Ready to Play
Sound Hole Covers
Trim Rings & Covers
Ukulele Guitar Parts
MGB 4 String Acoustic Lite Kit | 3 Pack
$14.00
Quality Acoustic Guitar Strings | Made in the USA
Steel & Phosphor Bronze Wound
Lite 4 String Acoustic Pack
13/17/26/35
About 44" in length
Includes a 3-pack of each string
Made in the USA
MGB 4 String Acoustic Medium Kit | 3 Pack
$17.00
Quality Acoustic Guitar Strings | Made in the USA
Steel & Phosphor Bronze Wound
Medium 4 String Acoustic Pack
17/26/35/46
About 44" in length
Includes a 3-pack of each string
Made in the USA
MGB 6" Aluminum Resonator Cone Chrome
$6.00
This aluminum resonator cone is great for adding that unique resonator sound to your next build!
Dimensions: 6" Diameter x 0.47" Height/Depth.
It creates a unique sound & has great tone.
Fits 5 1/4 inch hole
Made from aluminum for durability.
Learn more about this Resonator by watching the below video!
MGB 6" Brass Resonator Cone
$12.50
This Brass resonator cone is great for adding that unique resonator sound to your next build!
Dimensions: 6" Diameter x 0.47" Height/Depth.
It creates a unique sound & has great tone.
Fits hole 5.25.
Made from from Brass for durability.
Shiny bright finish can be softened with steel wool
Brass can be acid etched for exciting finishes.
Remove existing finish with lacquer thinner before adding special finishes.
Learn more about this Resonator by watching the below video!
MGB 6" Paint Can Lid Resonator Cone Steel
$7.50
This paint can lid resonator cone is great for adding that unique resonator sound to your next build!
Dimensions: 6" Diameter x 0.375" Height/Depth.
It creates a unique sound & has great tone.
Made from steel for durability.
Hand crafted in the U.S.A.
Learn more about this Resonator by watching the below video!
MGB 8 String Tenor Ukulele Bridge Placement Template
$7.50
Helpful template for placing bridge in perfect alignment with the neck.
• 1/8" acrylic board
Watch This Video:
MGB 8 string Tenor Ukulele Kit
$65.00
Minimum box length is 9 inches, box not included. Includes 8 string17 inch scale neck that is sanded and finished. Neck has hanger bolt and hardware for easy mounting on any box. Frets and fret board installed, includes slotted bone nut. Include a right and left tuner set with hardware. Rosewood bridge with bone saddle and two filler plugs. Four labeled nylon strings.
Ukulele Kit Includes:
Neck w/hanger bolt, reinforcement plate & hardware
One right and one left tuners with hardware
Set of 8 strings for ukulele.
Rosewood bridge w/bone saddle (two filler plugs)
Building this kit is very similar to all of our other ukulele kits. Please note that with 8 strings the tension is more that double that of a standard ukulele neck. Make sure to have a solid box with reinforcements as necessary. Scale length of 17 inches from inside edge of nut to center of saddle must be maintained. Our standard Tenor template will not work with this kit, use the 8 string template found here.
Assembly available HERE
This kit pairs well with the 9 Volt preamp (not included).
Watch This Video:
Watch This Video:
MGB Baritone Ukulele Bridge Placement Template
$7.50
Helpful template for placing bridge in perfect alignment with the neck.
• 1/8" Acrylic board
Watch This Video:
MGB Baritone Ukulele Guitar Kit
from $42.50
Includes 20 inch scale neck that is sanded and finished. Neck has hanger bolt and hardware for easy mounting on any box. Fretboard is Rosewood. Frets and fret board installed, includes bone nut. Four high quality enclosed tuners with hardware. Rosewood bridge with bone saddle and two filler plugs. Four labeled nylon strings.
Baritone Ukulele Kit Includes:
Neck w/hanger bolt & hardware
4 Enclosed Tuners (2 left & 2 right) & tuner hardware
Nylon strings (labeled)
Rosewood bridge w/bone saddle (two filler plugs)
Note: Box/body not included!
Watch This Video:
Watch This Video:
MGB Big 6 Acoustic Medium Kit | 3 Pack
$24.00
Quality Acoustic Guitar Strings | Made in the USA
Steel & Phosphor Bronze Wound
6 String Acoustic Pack
13/17/26/35/46/56
About 44" in length
Includes a 3-pack of each string
Made in the USA
MGB Big 6 Electric Kit | 3 Pack
$20.00
Quality Electric Guitar Strings | Made in the USA
Steel
10/13/17/26/36/46 Gauge
About 44" in length
Includes a 3-pack of each string
Made in the USA
MGB Bucks (Select Amount) | Store Gift Card
from $20.00
Shopping for someone else but not sure what to give them? Give them the gift of choice with a MGB Guitars & Parts Supplier gift card.
Gift cards are delivered by email and contain instructions to redeem them at checkout. Our gift cards have no additional processing fees.
MGB CBG Cheat Sheet
$1.00
Many builders are not musicians and have limited musical skills. It is often to difficult to know exactly how to tune strings on various instruments. MGB is not a musician and created his own cheat sheet to help him with set ups. While many musicians can get pretty close with tuning a string by ear, others (like MGB) have no idea where they are on the scale. MGB quickly realized it was helpful to use the corelating frequency for tuning. The A note has frequency of 440HZ. The Pano tuner app is very helpful, it provides the note and the frequency. The 88 keys on the piano are listed on the left, moving to the right are popular note tuning for a number of instruments. While there are many tuning possibilities for cbgs listed are a few popular choices.
MGB Concert Ukulele Bridge Placement Template
$7.50
Helpful template for placing bridge in perfect alignment with the neck.
• 1/8" MDF board
Watch This Video:
MGB Concert Ukulele Guitar Kit
from $40.00
Minimum box length is 8 inches. Includes 15 inch scale neck that is sanded and finished. Neck has hanger bolt and hardware for easy mounting on any box. Fretboards is Rosewood. Frets and fret board installed, includes bone nut. Four high quality enclosed tuners with hardware. Rosewood bridge with bone saddle and two filler plugs. Four labeled nylon strings.
Ukulele Kit Includes:
Neck w/hanger bolt & hardware
4 Enclosed Tuners (2 left & 2 right) & tuner hardware
Nylon strings (labeled)
Rosewood bridge w/bone saddle (two filler plugs)
Available with Chrome, Black or Gold tuners
Note: Box/body not included!
Check out the Deluxe Concert kit.
Watch This Video:
Watch This Video:
050
MGB Control Plate Birch
$2.00
Birch control plate. 3.6" x 1". Includes hardware (not photographed).
Control plate trim not included. Optional add-on.
MGB Dots 6" Wood Resonator Cover
$8.00
MGB Dots 6" Wood Resonator Cover
Laser Cut & engraved from 1/8 inch Baltic Birch Plywood.
Easy to stain or paint. Some sanding required.
8 Holes for mounting screws (Screws included).
Cover Only. Resonator Cone Available HERE
Watch this video!
MGB Fat Bottom F-Hole & Box Bucker Pickup Pre-Cut Top
$15.00
Note: current Fat Bottom kits do not include the neck notches. This is an optional top to use with our MGB Fat Bottom Guitar Body Kit with pre-cut f-holes and MGB "Box Bucker Gen 2" holes. Ready for sanding and finishing. Current product does not include the slot at the top.
Note: Pickup is not included.
Compatible with the following pickups:
MGB "Box Bucker Gen 2" Humbucker | 3 String Pickup
MGB "Box Bucker Gen 2" Humbucker | 4 String Pickup
MGB Fat Bottom F-Hole Pre-Cut Top
$15.00
Note: current Fat Bottom kits do not include the neck notches. This is an optional top to use with our MGB Fat Bottom Guitar Body Kit with pre-cut f-holes. Ready for sanding and finishing. Current product does not include the slot at the top.
MGB Fat Bottom Guitar Body Kit
$45.00
Note: current Fat Bottom kits do not include the neck notches. MGB Guitars is proud to introduce its Fat Bottom guitar body kit. This is the same body that MGB has used to create his unique cigar box mosaic guitars. Measuring roughly 12 inches by 16 inches the kit includes a 1/4 top panel, two ¾ inch thick center rings and a 1/4 inch bottom panel that includes pilot holes on the back side should you wish to mount with screws. Current product does not include the slot at the top. Approximately 2” in depth/thickness. Shaped more like a traditional guitar this blank box provides a perfect canvass for creating your own piece of art. Check out the gallery of pictures to see what Mike and others have done with these bodies.
Veteran Made in the USA
Roughly 12 inches by 16 inches
Includes a 1/4 top panel with a cut out for a 1 ½ inch neck, two ¾ inch thick center rings and a 1/4 inch bottom panel
Approximately 2” in depth/thickness.
Includes pilot holes on the back side to mount with screws
Plywood construction with birch veneer
Note: Sanding & Assembly of this kit is required.
Assembly Tips for the MGB Fat Bottom Body Kit:
To assemble the 2 inner rings, we recommend applying a generous amount of wood glue on the top of the "inner bottom" layer, apply the "inner top" layer over top of it, and use several clamps to tightly hold in place. Be sure to wipe any excess glue away. Let the glue dry fully before removing from clamps.
If the cigar box mosaic look is something you are interested in, this is how we lay it out. After you decide where each piece is going to be placed, use wood glue to apply to the top.
The back panel is lined with pre-drilled holes so that you can screw to the inner rings. You can wood glue the back as well if you prefer not to use screws, simply flip the back panel over so that the pre-drilled holes are facing inside and out of view.
MGB Five Dolla Make It Holla Aluminum Stamped Black Cover | 3/4/6 String
$2.00
Designed to work with our MGB Five Dolla Make It Holla Pickup.
Black finish
Includes black hardware
Compatible with:
MGB Five Dolla Make It Holla Pickup | 3/4/6 String
MGB Five Dolla Make It Holla Aluminum Stamped Cover | 3/4/6 String
$2.00
Designed to work with our MGB Five Dolla Make It Holla Pickup.
Aluminum finish
Includes hardware
Compatible with:
MGB Five Dolla Make It Holla Pickup | 3/4/6 String
MGB Five Dolla Make It Holla Birch Ply Cover | 3/4/6 String
$3.00
Designed to work with our MGB Five Dolla Make It Holla Pickup.
Birch Ply (Sand & Stain Ready)
Includes hardware
Compatible with:
MGB Five Dolla Make It Holla Pickup | 3/4/6 String
MGB Five Dolla Make It Holla Pickup | 3/4/6 String
$5.00
The perfect single coil pickup for those builds where cost is an issue. Don't let the low price fool you, this 4.5K pickup has lots of snap, check the video for a sound sample. The coil measures 2 1/2 inches long by 3/8 inches wide and 3/8 inches tall. You can select an optional cover or create your own. To install, cut a small slot in the top and install the pickup assembly. Hardware included. Connect to our Volume/Tone/Jack Harness and you have a great electronics package at a very reasonable price.
Quality Guitar Pickups from MGB Guitars & Parts.
4.5K Pickup
Single Coil Pickup Measures: 2-1/2" x 3/8" x 3/8"
Dovydas on a CBG w/ MGB Five Dolla Make it Holla Pickup:
Josh Barter on the MGB Classico Fat Bottom Guitar MGB Five Dolla Make it Holla Pickup:
MGB Five Dolla Make It Holla Rosewood Cover | 3/4/6 String
$3.00
Designed to work with our MGB Five Dolla Make It Holla Pickup.
Rosewood (Color & Grain Varies)
Includes hardware
Compatible with:
MGB Five Dolla Make It Holla Pickup | 3/4/6 String
MGB Five Dolla Make It Holla Stamped Antique Brass Cover | 3/4/6 String
$2.00
Designed to work with our MGB Five Dolla Make It Holla Pickup.
Antique Brass finish
Includes hardware
Compatible with:
MGB Five Dolla Make It Holla Pickup | 3/4/6 String
MGB Five Dolla Make It Holla Stamped Gold Cover | 3/4/6 String
$2.50
Designed to work with our MGB Five Dolla Make It Holla Pickup.
Gold finish
Includes gold hardware
Compatible with:
MGB Five Dolla Make It Holla Pickup | 3/4/6 String
MGB Gears 6" Wood Resonator Cover
$8.00
MGB Gears 6" Wood Resonator Cover
Laser Cut & engraved from 1/8 inch Baltic Birch Plywood.
Easy to stain or paint. Some sanding required.
8 Holes for mounting screws (Screws included).
Want the matching gear sound hole covers? Click HERE
Cover Only. Resonator Cone Available HERE
Watch this video!
MGB Hot Tuna Mini Humbucker Antique Brass Finish
from $18.50
What's a Hot Tuna? Let's talk about it!
Mini Humbucker
Split coil wiring
Available in chrome, gold, black, antique brass finish
1 1/2 by 3 5/8 by 7/8
Watch Video: MGB Hot Tuna Mini Humbucker
The Hot Tuna with its crazy name is pretty straightforward mini humbucker. It's small in scale and works out perfect for a lot of cigar box guitars. This humbucker has split coil wiring and is a little bit different than some of the wirings you'll see on some of our other pickups. Make sure to watch our video on that above. We've got four colors including chrome, gold, black, and antique brass.
The Hot Tuna is a new pickup that we've designed and we are really proud of we've done, we hope you guys like it and help make The Hot Tunas a household name.
Black wire is hot, green/braid is ground and red/white are where the coils connect.
Note: Also available with our push pull pot harness. This allows you to easily move from a single coil pickup to a humbucker by simply pushing or pulling the tone knob. Soldered sealed and tested. This is our favorite setup at MGB Guitars.
MGB Hot Tuna Mini Humbucker Black
from $17.50
What's a Hot Tuna? Let's talk about it!
Mini Humbucker
Split coil wiring
Available in chrome, gold, black, antique brass finish
1 1/2 by 3 5/8 by 7/8
Watch Video: MGB Hot Tuna Mini Humbucker
The Hot Tuna with its crazy name is pretty straightforward mini humbucker. It's small in scale and works out perfect for a lot of cigar box guitars. This humbucker has split coil wiring and is a little bit different than some of the wirings you'll see on some of our other pickups. Make sure to watch our video on that above. We've got four colors including chrome, gold, black, and antique brass.
The Hot Tuna is a new pickup that we've designed and we are really proud of we've done, we hope you guys like it and help make The Hot Tunas a household name.
Black wire is hot, green/braid is ground and red/white are where the coils connect.
Note: Also available with our push pull pot harness. This allows you to easily move from a single coil pickup to a humbucker by simply pushing or pulling the tone knob. Soldered sealed and tested. This is our favorite setup at MGB Guitars.
