All products
3/4 String Mini Box Bucker Covers
Accessories
Bass Guitar Parts
Best Selling Products
Buy Cigar Box Guitar Parts
Buy Guitar Bridges
Buy one, get 50% off a second one
CBGLife™ Accessories & More
CBGLife™ Hats
Cigar Box Guitar Builders
Cigar Box Guitar Kits
Decorative Hardware For Guitars
Discontinued
Guitar Accessories
Guitar Boxes & Bodies
Guitar Control Plates
Guitar Electronics Parts
Guitar Fretboards
Guitar Input Jacks
Guitar Knobs
Guitar Necks
Guitar Pickups
Guitar Resonator Cone & Cover
Guitar Strap Button
Guitar String Retainers
Guitar Strings
Guitar Tailpieces
Guitar Tools
Guitar Tuners
Made in the USA
MGB CBG Collection
MGB Deals
New Guitar Parts
Newest Products
Ready to Play
Sound Hole Covers
Trim Rings & Covers
Ukulele Guitar Parts
Bass 4 String Tailpiece Chrome or Black
$12.50
Chrome or black bass 4 string tailpiece. .6 inch or 15mm spacing.
Bass Bridge with Piezo
$20.00
A perfect bridge and piezo combination for four string bass builds. Includes walnut bridge and compensated bar style piezo with four segments. Bridge measures 5.06 by .8 by .35 inches. Overall height of bridge and piezo is .53 inches. Recommended string spacing is .7 inches. Must use preamp with this piezo.
Tailpiece
Bass Jack | Chrome
$5.00
Input jack for bass guitar
Made to fit 1/4 inch instrument cable
Chrome finish
Bass Nut File Set
$30.00
Perfect for filing bone nuts.
Hobby grade files
.045, .065, .075, .085, .105 &.130
Rubber-coated handles create a firm with comfortable control.
Each file list the two strings that it will work.
Durable and sturdy, will not bend. The perfect tool filing bass nuts to just the right size.
Set strings properly and quickly.
Bass Super Neck-Maple and Rosewood Neck | 30 inch Scale
$85.00
Quality Crafted Guitar Neck | Easy to Install
30 inch Scale
Suitable for 4 string builds
Head stock is pre-drilled for bass tuners
22 jumbo frets installed
Truss rod installed
0.6" thick headstock
1 5/8" width at nut
2 3/16" width at 12th fret
Overall length 30"
Top and side fret markers are included
Plastic slotted Nut
Hanger bolt is installed and hardware is included
1/8 inch shim is included
Use MGB short scale (31") bass strings
Box should be 12 inches in length
Maple construction with rosewood fingerboard
The perfect neck for your next bass build. The neck is completely finished and ready to go. Simply reinforce your box and bolt the neck on. The finger board is radiused just like high end guitar necks. Solid maple construction with a rosewood fret board set for 30 inch scale. The neck is meticulously sanded and the maple portion has a spray finish. The rosewood fret board is unfinished.
Buy strings here.
Buy tuners and accessories here.
Template here
Watch This Video:
Bass Tailpiece
$6.00
Perfect for four strings builds. This oak tailpiece measures 3 x 2 by .25 inches. Holes are .05, .065, '095 and .110 but can be easily enlarged if need
Bridge
Bass Thumb Rest
$5.00
Two pack of Rosewood thumb rests.
2 1/2 by 1/2 by 1/2 inches
Mounting Screws included
Bass Tuner Open | Left Chrome or Black
$5.75
Open chrome bass guitar tuner
One left side tuner
Chrome or black finish
Fits .6 inch thick headstock
Bass Tuner Open | Right Chrome or Black
$5.75
Open chrome bass guitar tuner
One right side tuner
Chrome or black finish
Fits .6 inch thick headstock
Bass Tuner | Left Chrome or Black
$5.75
Closed chrome bass guitar tuner
One left side tuner
Chrome or Black finish
Fits .6 inch thick headstock
Bass Tuner | Right Chrome or Black
$5.75
Closed chrome bass guitar tuner
One right side tuner
Chrome or black finish
Fits .6 inch thick headstock
Bigfoot Easy Box Double Sided Enclosure
$25.00
MGB Guitars is proud to introduce their Bigfoot Easy Box enclosure. This innovative enclosure has two sides with two distinct uses. One with a sound hole and one with a Bigfoot sound hole. This box was designed and built using the same principles used in acoustic instrument construction. The box is built using purfling and braces to create an incredibly strong and rigid structure. Additional reinforcements were added to key locations to allow when securing bridges. Cover plates are available to cover the sound hole.
Measuring 9 3/4 inches by 7 inches and 2 1/2 thick the box is made from thin ply with a top veneer of Sapele. IT comes in two versions one is unfinished and the other has several coats of spray finish. This box provides a perfect canvass for creating your own piece of musical art. The photo of the box split in two is to show the placement of internal components.
Roughly 7 inches by 9.75 inches
Approximately 2 1/2 inches deep
Acoustic side includes 2 3/8 inch sound hole
The box head is a full 5/8 thick
Multiply construction with Sapele veneer
.
Bigfoot Easy Box XL Double Sided Enclosure
$27.50
MGB Guitars is proud to introduce their Easy Box XL enclosure. This innovative enclosure has two sides with two distinct uses. One with a sound hole and one with Bigfoot sound hole. This box was designed and built using the same principles used in acoustic instrument construction. The box is built using purfling and braces to create an incredibly strong and rigid structure. Additional reinforcements were added to key locations to allow when securing bridges. Cover plates are available to cover the sound hole.
Measuring 11 1/2 inches by 8 inches and 2 1/2 thick the box is made from thin ply with a top veneer of Sapele. This box provides a perfect canvass for creating your own piece of musical art. The photo of the box split in two is to show the placement of internal components.
Roughly 11 1/2 inches by 8 inches
Approximately 2 3/8 inches deep
Acoustic side includes 2 5/8 inch sound hole
The box head and tail are a full 5/8 thick
Multiply construction with Sapele veneer
.
BK2000 Quad Humbucker pickup
from $17.50
Our newest humbucker pickup specifically designed for use in cigar box guitars & homemade instruments!
The BK2000 humbucker will rock your socks off! This pickup is a quad rail that tests at 18 kilohms that will fit your next 3, 4, or 6 string builds. This new model is also easy to wire and includes wiring for split coils for those wanting to separate the coils. Another quality guitar pickup from MGB Guitars that we're proud of offer!
Quality Guitar Pickup by MGB Guitars
Specifically designed for cigar box guitars & homemade instruments.
Split coil wiring that's easy to connect
Black = hot
Green with braid = ground
Red/White = coil connection to split the coils if desired
No noise sound
Trim ring sold separately
Note: Also available with our push pull pot harness. This allows you to easily move from a single coil pickup to a humbucker by simply pushing or pulling the tone knob. Soldered sealed and tested. This is our favorite setup at MGB Guitars.
BK2000 Trim Ring
$3.50
BK2000 Trim Ring
Fits MGB BK2000 pickup
Available in 4 colors
Black, Maple, Cherry, and Rosewood
Black Brickhouse 3 or 4 String Kit
$125.00
MGB kits are made for people with a fundamental knowledge of building stringed instruments. There are many videos available on our Youtube Channel that can provide help. We are also available by phone to help.
Kit includes everything needed to complete this attractive 3/4 string instrument.
Included are:
9 1/2" x 7 1/4" x 2" box that is fully machined, reinforced and ready for assembly.
24 inch scale Easy Neck Rosewood and Okume fretted neck predrilled for 3/4 tuners. Neck reinforcement plate is included. String slots on nut are filed
Hot Rail pickup with harness installed. Push/pull switch on tone pot allows selecting between single coil and humbucker.
Mounting hardware and knobs.
Black tuners, bridge, strap pins and back cover.
Includes a black jack plate.
Includes appropriate packs of .013, .017, .026 and .036 strings.
Use a 7/16 inch deep well socket for the neck hanger bolt and a 10 mm socket or wrench to tighten tuner ferules.
Helpful video HERE.
Assembly available HERE
Frank McGrogan gives it a spin.
Black Classic Tuner | Left
$2.75
Classic style tuning key in black designed for any type of guitar. Reliable, no frills design. 16 to 1 ratio. Hardware included.
Fits .6 inch thick headstock
Black Classic Tuner | Right
$2.75
Classic style tuning key in black designed for any type of guitar. Reliable, no frills design. 16 to 1 ratio. Hardware included.
Fits .6 inch thick headstock
Black Decorative Protective
$4.50
Decorative protective box corners not only add a unique more finished look but also protect your instrument.
Comes with 8 corners and matching hardware
Black finish
Black Dice Knobs 3 Pack
$4.50
Quality guitar hardware from MGB Guitars.
Perfect for any style guitar
Plastic construction
Black finish
Comes in a 3 pack
Black Domed Top Knurl Knob
$2.00
Black Domed Top Knurl Knob
Extremely common knob thats often found on more modern guitars.
Perfect for any style guitar.
Black finish
Quality guitar hardware from MGB Guitars.
Black Flat Top Knurl Knob
$2.50
Extremely common knob that often found on more modern guitars.
Quality guitar hardware from MGB Guitars.
Perfect for any style guitar
Black finish
Black Flat Top Knurl Knob
$1.50
Black Flat Top Knurl Knob
Extremely common knob that are often found on more modern guitars.
Perfect for any style guitar.
Black finish
Quality guitar hardware from MGB Guitars.
Black Fret Markers
$2.50
<p>Black fret markers are 1/4 inch in diameter. Easy to install. Mark locations for markers. Drill shallow hole using 1/4 inch flat bottom or brad point drill bit. Test drill depth on a scrap piece of wood. Glue markers in place using super glue. Carefully sand to finished height. If you drill too deep you can stack two markers to fix the problem.</p><ul><li>Black</li><li>10-Pack</li><li>1/4" Diameter</li></ul>
Black Half Moon Tuner | Left
$2.75
Half moon style tuning key in black designed for any type of guitar. Reliable, no frills design. 16 to 1 ratio. Hardware included.
Fits .6 inch thick headstock
Black Half Moon Tuner | Right
$2.75
Half moon style tuning key in black designed for any type of guitar. Reliable, no frills design. 16 to 1 ratio. Hardware included.
Fits .6 inch thick headstock
Black Locking Tuner | Left
$3.75
Standard peg style Locking tuner in black designed for any type of guitar. Locking tuners offer much more stability than standard tuners. 16 to 1 ratio. Hardware included.
Fits .6 inch thick headstock
Get our 11MM drill bit sized perfectly for MGB tuners.
Black Locking Tuner | Right
$3.75
Standard peg style Locking tuner in black designed for any type of guitar. Locking tuners offer much more stability than standard tuners. 16 to 1 ratio. Hardware included.
Fits .6 inch thick headstock
Get our 11MM drill bit sized perfectly for MGB tuners.
Black Tone Knob
$1.00
Black Tone Knob
Perfect for any style guitar
Plain black finish.
Name and numbers in contrasting white.
Quality guitar hardware from MGB Guitars.
Black Tuner Mini | Left
$2.50
Quality guitar hardware from MGB Guitars. Smaller knob than standard tuner.
Get our 11MM drill bit sized perfectly for MGB tuners.
Black Tuner Mini | Right
$2.50
Quality guitar hardware from MGB Guitars. Smaller knob than standard tuner.
Get our 11MM drill bit sized perfectly for MGB tuners.
