Newest Products

4-String Black Pickup Vol/Tone/Jack -- Buy One Get One HALF OFF $12.75

Designed specifically for 4 string CBGs, this pre wired pickup includes volume/tone pots and the input jack making it ready to go right out of the box. Designed for 4 string CGBs Pre wired and ready to go right into a guitar Includes volume and tone pots.

Frisco Bridge 3 or 4 string Maple -- Buy One Get One FREE $3.00

Quality guitar hardware from MGB Guitars. Perfect for homemade instruments. Reminiscent of the Frisco bridge that spans the Mississippi at Memphis. At .6 inches this bridge is taller than most but can be cut or sanded to the right height. String location notches are provided along the top edge. 3 string slots are spaced .5 inches apart and 4 string are .4 inches. Make sure to file the slots to provide a back angle falling off toward the tailpiece. 2 3/4 Inches wide and .6 inch tall. Easily sanded to get the right height. Light sanding required, suitable for staining or painting

Add to cart

Mandolin Kit -- Buy One Get One HALF OFF $90.00

For this deal simply order one and we will ship two, the price includes one at full price and one at half price. This kit includes everything needed to build a Mandolin except for the body. The neck is Okume with a Walnut fretboard. Binding and face and side fret markers are included. The scale length is 13 3/4 inches. The neck also includes a truss rod. A compensated and adjustable Walnut bridge is included along with a chrome tailpiece. Tuners and a truss rod cover are included. Four pairs of stings are provided including .012, .016, .026 and .032 sizes. Tuning is GDAE. Note: Keep in mind the tension created by 8 strings is substantial, all boxes will need additional reinforcement to handle the added stress. Make sure the top where the neck is connected is thick (close to 3/8" is ideal) and rigid. You will note that two hanger bolts are used to provide and solid connection between the neck and the box.

Carillo Pledge Box and Neck $75.00

This kit includes a neck, box, cover plate and neck reinforcement plate ready to assemble. The kit is available in 3 or 4 string models predrilled and ready for MGB enclosed tuners. These are limited addition as we never know if or when we will find additional boxes. Simply add your choice of electronics, tuners and trim pieces to finish. Ghosting a Lucky 13 of Point Five O work well with this combination. The kit includes a 24 inch scale Easy Neck with Maple fretboard drilled for 3 or 4 tuners. Use the neck spacer to raise the neck when using a standard hard tail bridge.

Add to cart

Mandolin Kit $60.00

This kit includes everything needed to build a Mandolin except for the body. The neck is Okume with a Walnut fretboard. Binding and face and side fret markers are included. The scale length is 13 3/4 inches. The neck also includes a truss rod. A compensated and adjustable Walnut bridge is included along with a chrome tailpiece. Tuners and a truss rod cover are included. Four pairs of stings are provided including .012, .016, .026 and .032 sizes. Tuning is GDAE. Note: Keep in mind the tension created by 8 strings is substantial, all boxes will need additional reinforcement to handle the added stress. Make sure the top where the neck is connected is thick (close to 3/8" is ideal) and rigid. You will note that two hanger bolts are used to provide and solid connection between the neck and the box.

6-String Black Pickup Vol/Tone/Jack $9.50

Designed specifically for 6 string CBGs, this pre wired pickup includes volume/tone pots and the input jack making it ready to go right out of the box. Pre wired and ready to go right into a guitar Includes volume and tone pots.

Frisco Bridge 3 or 4 string $3.00

Quality guitar hardware from MGB Guitars. Perfect for homemade instruments. Reminiscent of the Frisco bridge that spans the Mississippi at Memphis. At .6 inches this bridge is taller than most but can be cut or sanded to the right height. String location notches are provided along the top edge. 3 string slots are spaced .5 inches apart and 4 string are .4 inches. Make sure to file the slots to provide a back angle falling off toward the tailpiece. 2 3/4 Inches wide and .6 inch tall. Easily sanded to get the right height. Light sanding required, suitable for staining or painting

Add to cart

3-String Chrome Hinge Style Tailpiece $3.50

Hinge style steel tailpiece made for 3 string cigar box guitars or other homemade instruments. Chrome plated steel construction Hardware included Made specifically for 3 string cigar box guitars or other homemade instruments

MGB T Plate- bridge and pickup mounting plate $7.50

This plate is perfect for mounting a hard-tail bridge and a rail style pickup. Available in chrome, black or gold finish. Available for 3 and 4 string MGB bridges Made from 1/8 inch sturdy acrylic Includes mounting screws Works with MGB Hot Rail (20631) and blade style pickups Use the T-Plate template for help in locating mounting holes

Add to cart

-17% sale

MGB Mini Box Bucker Cover Stamped Antique Brass | 3/4 String | 3-Pack Bundle $10.00 $12.00

Designed to work with our 3/4 String Mini Box Bucker Pickups. Stamped Antique Brass Stamped Cover Includes hardware Compatible with: MGB Mini Box Bucker Pickup 4.0 | 3/4 String

-17% sale

MGB Mini Box Bucker Cover Aluminum Stamped Plated Gold | 3/4 String | 3-Pack Bundle $10.00 $12.00

Designed to work with our 3/4 String Mini Box Bucker Pickups. Aluminum stamped Plated gold finish Includes gold hardware Compatible with: MGB Mini Box Bucker Pickup 4.0 | 3/4 String

-17% sale

MGB Mini Box Bucker Cover Aluminum Stamped Plated Black | 3/4 String | 3-Pack Bundle $10.00 $12.00

Designed to work with our 3/4 String Mini Box Bucker Pickups. Aluminum stamped Plated black finish Includes black hardware Compatible with: MGB Mini Box Bucker Pickup 4.0 | 3/4 String

-17% sale

MGB Mini Box Bucker Cover Aluminum Stamped | 3/4 String | 3-Pack Bundle $10.00 $12.00

Designed to work with our 3/4 String Mini Box Bucker Pickups. Aluminum stamped Aluminum finish Includes chrome hardware Compatible with: MGB Mini Box Bucker Pickup 4.0 | 3/4 String

MGB Micro Pup Cover Aluminum Stamped | 3/4 String | 3-Pack Bundle $9.00

Designed to work with our MGB Micro Pup 3/4 String Single Coil Flat Pickup Dimensions: 1.4" x 2.7" with a thickness of .25" Chrome finish Includes chrome hardware Compatible with: MGB Micro Pup 3/4 String Single Coil Flat Pickup

MGB Micro Pup Cover Gold | 3/4 String | 3-Pack Bundle $9.00

Designed to work with our MGB Micro Pup 3/4 String Single Coil Flat Pickup Dimensions: 1.4" x 2.7" with a thickness of .25" Gold finish Includes gold hardware Compatible with: MGB Micro Pup 3/4 String Single Coil Flat Pickup

MGB Micro Pup Cover Aluminum Stamped Plated Black | 3/4 String | 3-Pack Bundle $9.00

Designed to work with our MGB Micro Pup 3/4 String Single Coil Flat Pickup Dimensions: 1.4" x 2.7" with a thickness of .25" Black finish Includes black hardware Compatible with: MGB Micro Pup 3/4 String Single Coil Flat Pickup

MGB Micro Pup Cover Antique Brass | 3/4 String | 3-Pack Bundle $9.00

Designed to work with our MGB Micro Pup 3/4 String Single Coil Flat Pickup Dimensions: 1.4" x 2.7" with a thickness of .25" Antique Brass finish Includes hardware Compatible with: MGB Micro Pup 3/4 String Single Coil Flat Pickup

-17% sale

Micro Pup Single Coil Flat Pickup | 3-Pack Bundle $25.00 $30.00

These low-profile pickups are designed specifically for surface mounting on cigar box guitars. They eliminate the need for cutting a large hole in the box and slotting the neck. Simply mount on the surface of the box and run the wire through a small hole to connect with the rest of the electronics. This pickup is rated at 3k, so perfect for CBG installations! Dimensions: 1.7" x .96" with a thickness of .23" Mini Box Bucker Mounting Ring or Covers not included Looking for covers? Click HERE for a wide variety of pickup covers.

-17% sale

MGB Mini Box Bucker Pickup 4.0 | 3/4 String | 3-Pack

Mini Box Bucker Pickup 4.0 | 3/4 String | 3-Pack Bundle $30.00 $36.00

These low-profile pickups are designed specifically for surface mounting on cigar box guitars. They eliminate the need for cutting a large hole in the box and slotting the neck. Simply mount on the surface of the box and run the wire through a small hole to connect with the rest of the electronics. Dimensions are 1.75" wide, 1.65" tall and .23" thick. Looking for covers? Click HERE for a wide variety of pickup covers. Mini Box Bucker Mounting Ring or Covers not included

4-String Formed Tailpiece | Stainless Steel $5.50

Stainless steel formed stainless steel tailpiece made for 4 string cigar box guitars or other homemade instruments. Stainless steel construction Made specifically for 4 string cigar box guitars or other homemade instruments

Zippy 3 String Neck | 20 Inch Scale from $45.00

Quality Crafted Guitar/Ukulele Neck | Install Ready Easy to Install 20 Inch Scale 19 Frets 3 String Ready Sanded, Finished and ready to use Overall Length 19” Nut and Tuners Included, Some Assembly Required Hardwood Construction with Rosewood Fingerboard Ready to go out of the box. Solid hardwood construction with a synthetic fret board. The neck is sanded and has a spray finish. The Rosewood fret board is unfinished. The overall length is 16 inches and the fret board overhangs the neck by 2-3/4 inches. The neck is 1-3/8 inches wide at the nut and 1 -7/8 inches wide at other end. The nut is set to the right height. Mounting is easy using the hanger style bolt.

Add to cart

Zippy 4 String Neck | 20 Inch Scale from $45.00

Quality Crafted Guitar Neck | Install Ready Easy to Install 20 Inch Scale 19 Frets 4 String Ready Sanded, Finished and ready to use Overall Length 19" Pre-slotted Nut, Some Assembly Required Available with Chrome, Gold or Black tuners. Hardwood Construction with Rosewood Fingerboard Ready to go out of the box. Solid hardwood construction with a synthetic fret board. The neck is sanded and has a spray finish. The Rosewood fret board is unfinished. The overall length is 16 inches and the fret board overhangs the neck by 2-3/4 inches. The neck is 1-3/8 inches wide at the nut and 1 -7/8 inches wide at other end. The nut is set to the right height and is pre-slotted. Mounting is easy using the hanger style bolt.

Add to cart

MGB Micro Pup Cover Aluminum Stamped Antique Brass | 3/4 String $4.00

Designed to work with our MGB Micro Pup 3/4 String Single Coil Flat Pickup Dimensions: 1.4" x 2.7" with a thickness of .25" Antique Brass finish Includes hardware Compatible with: MGB Micro Pup 3/4 String Single Coil Flat Pickup Shim Available here.

MGB Mini Box Bucker Cover Aluminum Stamped Antique Brass | 3/4 String

MGB Mini Box Bucker Cover Stamped Antique Brass | 3/4 String $4.00

Designed to work with our 3/4 String Mini Box Bucker Pickups. Stamped Antique Brass Stamped Cover Includes hardware Compatible with: MGB Mini Box Bucker Pickup 4.0 | 3/4 String Shim Available here.

MGB Micro Pup 3/4 String Single Coil Flat Pickup $10.00

These low-profile pickups are designed specifically for surface mounting on cigar box guitars. They eliminate the need for cutting a large hole in the box and slotting the neck. Simply mount on the surface of the box and run the wire through a small hole to connect with the rest of the electronics. This pickup is rated at 3k, so it's nice and hot for guitar installations! Make sure the magnets face the strings. Dimensions: 1.7" x .96" with a thickness of .23" Covers not included, find covers here. Cover template HERE.

MGB Micro Pup Cover Aluminum Stamped Plated Black | 3/4 Stringk $4.00

Designed to work with our MGB Micro Pup 3/4 String Single Coil Flat Pickup Dimensions: 1.4" x 2.7" with a thickness of .25" Black finish Includes black hardware Compatible with: MGB Micro Pup 3/4 String Single Coil Flat Pickup Shim available here.

MGB Micro Pup Cover Aluminum Stamped Plated Gold | 3/4 String $4.00

Designed to work with our MGB Micro Pup 3/4 String Single Coil Flat Pickup Dimensions: 1.4" x 2.7" with a thickness of .25" Gold finish Includes gold hardware Compatible with: MGB Micro Pup 3/4 String Single Coil Flat Pickup Shim available here.

MGB Micro Pup Cover Aluminum Stamped | 3/4 String $3.00

Designed to work with our MGB Micro Pup 3/4 String Single Coil Flat Pickup Dimensions: 1.4" x 2.7" with a thickness of .25" Satin Finish Includes chrome hardware Compatible with: MGB Micro Pup 3/4 String Single Coil Flat Pickup Shim available here.

MGB Mini Box Bucker Cover Aluminum Stamped Plated Black | 3/4 String $4.00

Designed to work with our 3/4 String Mini Box Bucker Pickups. Aluminum stamped Plated black finish Includes black hardware Compatible with: MGB Mini Box Bucker Pickup 4.0 | 3/4 String Shim available here.

MGB Mini Box Bucker Cover Aluminum Stamped Plated Gold | 3/4 String $4.00

Designed to work with our 3/4 String Mini Box Bucker Pickups. Aluminum stamped Plated gold finish Includes gold hardware Compatible with: MGB Mini Box Bucker Pickup 4.0 | 3/4 String Shim available here.

MGB Mini Box Bucker Cover Aluminum Stamped Chrome | 3/4 String

MGB Mini Box Bucker Cover Aluminum Stamped| 3/4 String $4.00

Designed to work with our 3/4 String Mini Box Bucker Pickups. Aluminum stamped Satin Finish Includes chrome hardware Compatible with: MGB Mini Box Bucker Pickup 4.0 | 3/4 String Shim available here.

MGB Rosewood Bridge w/Bone | 3/4 String $3.50

Excellent floating bridge for 3 or 4 string applications. Light sanding required. Overall height with nut is .375". Dimensions: 2" x 1.25" x .25" Rosewood & Bone Pre-assembled

Find anything you need

SIGN ME UP