Easy Neck Diatonic 24 inch Scale Easy Neck Diatonic 24 inch Scale
Easy Neck Diatonic 24 inch Scale $45.00
Quality Crafted Guitar Neck | Easy to Install 24 inch Scale Perfect for boxes that are 9" long Suitable for 3,4 and 5 string builds 9/16" thick headstock Nut is installed but not slotted 1 3/8" width at nut 1 1/2" width at 12th fret Fretboard length is 17.5" Overhang is 1 1/8" Overall length 23 3/4" Face fret markers are included Fret board shim included Bone Nut Hanger bolt and hardware included Use 10MM socket or wrench. Okume construction with rosewood fingerboard Headstock Tuner template is available The perfect neck for your next build. The Easy Neck is completely finished and ready to go. Simply reinforce your box and bolt the neck on. Solid Okume construction with a rosewood fret board set for 24 inch scale. The neck is meticulously sanded and the Okume portion has a spray finish. The rosewood fret board is unfinished. The Easy Neck is similar to the Super Neck and installation techniques are the same so the following video applies.   Bridge placement template Watch This Video:
Super Sixer Bolt on Neck Super Sixer Bolt on Neck
Super Sixer Bolt on Neck $75.00
Quality Crafted Guitar Neck | Easy to Install 25.5 inch Scale Suitable for 6 string builds Head stock is pre-drilled for tuners 22 frets installed and nicely finished Truss rod installed 0.6" thick headstock 1 5/8" width at nut 2" width at 12th fret Overall length 25 3/4" Top and side fret markers are included Plastic slotted Nut Hanger bolt is installed and hardware is included 1/8 inch fret board shim is included as well as thin back angle shim Box should be 10 inches in length Maple construction with rosewood fingerboard Bridge placement template The perfect neck for your next six string build. The neck is completely finished and ready to go. Simply reinforce your box and bolt the neck on. The finger board is radiused just like high end guitar necks. Solid maple construction with a rosewood fret board set for 25.5  inch scale. The neck is meticulously sanded and the maple portion has a spray finish. The rosewood fret board is unfinished. Watch This Video:
Deluxe Easy Neck 24 inch Scale
Deluxe Easy Neck 24 inch Scale $60.00
Quality Crafted Guitar Neck | Easy to Install This deluxe kit is similar to the standard product but includes white banding along both sides of the neck and black side fret markers. 24 inch Scale Perfect for boxes that are 9" long Suitable for 3,4 and 5 string builds 9/16" thick headstock Nut is installed but not slotted 1 3/8" width at nut 1 1/2" width at 12th fret Fretboard length is 17.5" Overhang is 1 1/8" Overall length 23 3/4" Face fret markers are included, side markers not included  Bone Nut Hanger bolt and hardware included Okume construction with rosewood fingerboard Headstock Tuner template is available The perfect neck for your next build. The Easy Neck is completely finished and ready to go. Simply reinforce your box and bolt the neck on. Solid Okume construction with a rosewood fret board set for 24 inch scale. The neck is meticulously sanded and the Okume portion has a spray finish. The rosewood fret board is unfinished. The Easy Neck is similar to the Super Neck and installation techniques are the same so the following video applies.   Bridge placement template Watch This Video:
Mandolin Kit Mandolin Kit
Mandolin Kit $60.00
This kit includes everything needed to build a Mandolin except for the body. The neck is Okume with a Walnut fretboard. Binding and face and side fret markers are included. The scale length is 13 3/4 inches. The neck also includes a truss rod. A compensated and adjustable Walnut bridge is included along with a chrome tailpiece. Tuners and a truss rod cover are included.  Four pairs of stings are provided including .012, .016, .026 and .032 sizes. Tuning is GDAE. Note: Keep in mind the tension created by 8 strings is substantial, all boxes will need additional reinforcement to handle the added stress. Make sure the top where the neck is connected is thick (close to 1/2" is ideal) and rigid. You will note that two hanger bolts are used to provide and solid connection between the neck and the box.
Easy Neck Okume & Maple Fretted Neck | 24 inch Scale Easy Neck Okume & Maple Fretted Neck | 24 inch Scale
Easy Neck Okume & Maple Fretted Neck | 24 inch Scale $47.50
Quality Crafted Guitar Neck | Easy to Install 24 inch Scale Perfect for boxes that are 9" long Suitable for 3,4 and 5 string builds 9/16" thick headstock Nut is installed but not slotted 1 3/8" width at nut 1 1/2" width at 12th fret Fretboard length is 17.5" Overhang is 1 1/8" Overall length 23 3/4" Face fret markers are included Bone Nut Hanger bolt and hardware included Okume construction with Maple Fretboard Headstock Tuner template is available The perfect neck for your next build. The Easy Neck is completely finished and ready to go. Simply reinforce your box and bolt the neck on. Solid Okume construction with a Maple fret board set for 24 inch scale. The neck is meticulously sanded and the Okume portion has a spray finish. The Maple fret board is unfinished. Headstock has a male veneer layer showing.  The Easy Neck is similar to the Super Neck and installation techniques are the same so the following video applies.   Bridge Placement Template
Bass Super Neck-Maple and Rosewood Neck | 30 inch Scale Bass Super Neck-Maple and Rosewood Neck | 30 inch Scale
Bass Super Neck-Maple and Rosewood Neck | 30 inch Scale $85.00
Quality Crafted Guitar Neck | Easy to Install 30 inch Scale Suitable for 4 string builds Head stock is pre-drilled for bass tuners 22 jumbo frets installed Truss rod installed 0.6" thick headstock 1 5/8" width at nut 2 3/16" width at 12th fret Overall length 30" Top and side fret markers are included Plastic slotted Nut Hanger bolt is installed and hardware is included 1/8 inch shim is included  Use MGB short scale (31") bass strings Box should be 12 inches in length Maple construction with rosewood fingerboard The perfect neck for your next bass build. The neck is completely finished and ready to go. Simply reinforce your box and bolt the neck on. The finger board is radiused just like high end guitar necks. Solid maple construction with a rosewood fret board set for 30 inch scale. The neck is meticulously sanded and the maple portion has a spray finish. The rosewood fret board is unfinished.  Buy strings here. Buy tuners and accessories here. Watch This Video:
U-Bass Template U-Bass Template
U-Bass Template $10.00
Makes bridge placement a breeze This template is specifically made for use with the U-Bass kit. Provides a the right location for the bridge. Always check to make sure the scale length is 20 5/16" at the bottom of the saddle where the lowest string rests.
Easy Neck Non-Fretted Neck-Rosewood or Maple finger board Easy Neck Non-Fretted Neck-Rosewood or Maple finger board
Easy Neck Non-Fretted Neck-Rosewood or Maple finger board from $47.50
Quality Crafted Guitar Neck | Easy to Install Perfect for boxes that are short as 9" long Suitable for 3,4 and 5 string builds 9/16" thick headstock Nut is installed but not slotted 1 3/8" width at nut 1 1/2" width at 12th fret Fretboard length is 17.5" Overhang is 1 1/8" Overall length 23 3/4" Bone Nut Hanger bolt and hardware included Okume construction with Rosewood or Maple fingerboard Headstock Tuner template is available The perfect neck for your next build. The EZNeck is completely finished and ready to go. Simply reinforce your box and bolt the neck on. Solid Okume construction with a rosewood or Maple fret board. The neck is meticulously sanded and the Okume portion has a spray finish. The rosewood fret board is unfinished. The EZNeck is similar to the Super Neck and installation techniques are the same so the following video applies. Bridge placement template   Watch This Video:
Easy Neck 24 inch Scale Easy Neck 24 inch Scale
Easy Neck 24 inch Scale $45.00
Quality Crafted Guitar Neck | Easy to Install 24 inch Scale Perfect for boxes that are 9" long Suitable for 3,4 and 5 string builds 9/16" thick headstock Nut is installed but not slotted 1 3/8" width at nut 1 1/2" width at 12th fret Fretboard length is 17.5" Overhang is 1 1/8" Overall length 23 3/4" Face fret markers are included Bone Nut Hanger bolt and hardware included Okume construction with rosewood fingerboard Headstock Tuner template is available The perfect neck for your next build. The Easy Neck is completely finished and ready to go. Simply reinforce your box and bolt the neck on. Solid Okume construction with a rosewood fret board set for 24 inch scale. The neck is meticulously sanded and the Okume portion has a spray finish. The rosewood fret board is unfinished. The Easy Neck is similar to the Super Neck and installation techniques are the same so the following video applies.   Bridge placement template Watch This Video:
MGB Super Neck/ Easy Neck Headstock Tuner Hole Template
MGB Super Neck/ Easy Neck Headstock Tuner Hole Template $7.50
Makes bridge placement a breeze This acrylic template is specifically made for use with the Super Necks and Easy Necks. Provides a template for laying out tuner holes. The large number of holes provide ultimate flexibility in laying out holes for tuners as need for each build. Warning: make sure to check spacing if tuners are placed closely on one side.
MGB Super Neck Template
MGB Super Neck Template $7.50
Makes bridge placement a breeze This template is specifically made for use with the Super Neck. Provides a the right location for a 3 or 4 string hard tail bridge. Always check to make sure the scale length is 25.5".
MGB Super Neck-Maple and Rosewood Neck | 25.5 inch Scale w zero fret MGB Super Neck-Maple and Rosewood Neck | 25.5 inch Scale w zero fret
MGB Super Neck-Maple and Rosewood Neck | 25.5 inch Scale w zero fret $70.00
Quality Crafted Guitar Neck | Easy to Install 25.5 inch Scale Includes zero fret and zero fret string spacers for 3 and 4 strings Suitable for 3,4 and 5 string builds 0.6" thick headstock 1 3/8" width at nut 1 3/4" width at 12th fret Top and side fret markers are included Bone Nut Hanger bolt and hardware included Hanger bolts are installed. Maple construction with rosewood fingerboard Note: these neck now include a zero fret to aid in getting perfect action height. Make sure to notch the bone nut to align strings. Strings should rest fully on the zero nut, see pics. The perfect neck for your next build. The Super Neck is completely finished and ready to go. Simply reinforce your box and bolt the neck on. Solid maple construction with a rosewood fret board set for 25.5 inch scale. The neck is meticulously sanded and the maple portion has a spray finish. The rosewood fret board is unfinished.  Watch This Video:
Zippy 3 String Neck | 20 Inch Scale Zippy 3 String Neck | 20 Inch Scale
Zippy 3 String Neck | 20 Inch Scale from $40.00
Quality Crafted Guitar/Ukulele Neck | Install Ready Easy to Install 20 Inch Scale 19 Frets 3 String Ready Sanded, Finished and ready to use Overall Length 19” Nut and Tuners Included,  Some Assembly Required Hardwood Construction with Rosewood Fingerboard Ready to go out of the box. Solid hardwood construction with a synthetic fret board.  The neck is sanded and has a spray finish. The Rosewood fret board is unfinished. The overall length is 16 inches and the fret board overhangs the neck by 2-3/4 inches. The neck is 1-3/8 inches wide at the nut and 1 -7/8 inches wide at other end. The nut is set to the right height. Mounting is easy using the hanger style bolt. 
Zippy 4 String Neck | 20 Inch Scale Zippy 4 String Neck | 20 Inch Scale
Zippy 4 String Neck | 20 Inch Scale from $40.00
Quality Crafted Guitar Neck | Install Ready Easy to Install 20 Inch Scale 19 Frets 4 String Ready Sanded, Finished and ready to use Overall Length 19" Pre-slotted Nut,  Some Assembly Required Available with Chrome, Gold or Black tuners. Hardwood Construction with Rosewood Fingerboard Ready to go out of the box. Solid hardwood construction with a synthetic fret board.  The neck is sanded and has a spray finish. The Rosewood  fret board is unfinished. The overall length is 16 inches and the fret board overhangs the neck by 2-3/4 inches. The neck is 1-3/8 inches wide at the nut and 1 -7/8 inches wide at other end. The nut is set to the right height and is pre-slotted. Mounting is easy using the hanger style bolt. 
3 or 4 String Maple and Rosewood Neck | 25.5 inch Scale 3 or 4 String Maple and Rosewood Neck | 25.5 inch Scale
3 or 4 String Maple and Rosewood Neck | 25.5 inch Scale $85.00
Quality Crafted Guitar Neck | Install Ready 25.5 Inch Scale 3 or 4 String Ready 3.75" x 6" Paddle Size Overall Length 35.5" 10" Tailpiece Maple Construction with Rosewood Fingerboard The perfect neck for your next build. Suitable for 3 and 4 string cigar box guitars. Solid maple construction with a rosewood fret board set for 25.5 inch scale. A 3 and 3/4 by 6 inch paddle style headstock provides the perfect blank to create the shape you want. The neck is meticulously sanded and the maple portion has a spray finish. The rosewood fretboard is unfinished. The overall length is 35 1/2 inches and the tailpiece is 10 inches long. The main portion of the neck is 1-1/2 inches wide.