Buy Cigar Box Guitar Parts

Included is a preamp/equalizer, tuner and battery box. Works with all piezos that connect with a 2.5mm plug.  Included are template/trim rings for mounting the components. The battery box uses two 2032  round batteries (not included) which are installed positive side up. Wire management components are included. A plug will need to be installed in the jack for the tuner to operate.  Click here for Router Template

Quality Acoustic Guitar Strings | Made in the USA Steel & Phosphor Bronze Wound Medium 4 String Acoustic Pack 17/26/35/46 About 44" in length  Includes a 3-pack of each string Made in the USA

Many builders are not musicians and have limited musical skills. It is often to difficult to know exactly how to tune strings on various instruments. MGB is not a musician and created his own cheat sheet to help him with set ups. While many musicians can get pretty close with tuning a string by ear, others (like MGB) have no idea where they are on the scale. MGB quickly realized it was helpful to use the corelating frequency for tuning. The A note has  frequency of 440HZ. The Pano tuner app is very helpful, it provides the note and the frequency. The 88 keys on the piano are listed on the left, moving to the right are popular note tuning for a number of instruments.  While there are many tuning possibilities for cbgs listed are a few popular choices.

Quality Acoustic Guitar Strings | Made in the USA Steel 0.026 Gauge About 44" in length  3 Pack Made in the USA

Chrome bass string retainer Chrome finish

Quality guitar hardware from MGB Guitars. Slip on style .825 inches tall .75 diameter Price per each  

Deco style tuner in chrome or black designed for any type of guitar. Reliable, no-frills design. 16 to 1 ratio. Hardware included. Fits .6 inch thick headstock

Designed specifically for 6 string CBGs, this pre wired pickup includes volume/tone pots and the input jack making it ready to go right out of the box. Pre wired and ready to go right into a guitar Includes volume and tone pots.

Quality guitar hardware from MGB Guitars. Perfect for any style guitar Black finish Plastic Construction Speed knob style

High quality padded ukulele carry bag. Heavy padded Cordura construction Waterproof and dust proof Front panel pocket Carry handle and back pack straps 24 x 9 x 3 inches Sized for Concert Ukuleles and smaller instruments

Wider strap buttons for better strap stability. Modern style strap button for mounting guitar straps. Can be installed anywhere on your guitar. Comes with felts and matching hardware. Wider mouth for better strap stability Matching hardware included One felt per button Also comes in Chrome

Quality guitar hardware from MGB Guitars. The perfect addition to your build. Made to fit around the pickup for a more finished look or to hide any imperfections in the routing. Also comes in black and chrome.

Quality guitar hardware from MGB Guitars. Perfect for any style guitar Chrome finish

A perfect bridge and piezo combination for four string bass builds. Includes walnut bridge and compensated bar style piezo with four segments. Bridge measures 5.06 by .8 by .35 inches. Overall height of bridge and piezo is .53 inches. Recommended string spacing is .7 inches. Must use preamp with this piezo. Tailpiece

Quality Crafted Guitar Neck | Easy to Install This deluxe kit is similar to the standard product but includes white banding along both sides of the neck and black side fret markers. 24 inch Scale Perfect for boxes that are 9" long Suitable for 3,4 and 5 string builds 9/16" thick headstock Nut is installed but not slotted 1 3/8" width at nut 1 1/2" width at 12th fret Fretboard length is 17.5" Overhang is 1 1/8" Overall length 23 3/4" Face fret markers are included, side markers not included  Bone Nut Hanger bolt and hardware included Okume construction with rosewood fingerboard Headstock Tuner template is available The perfect neck for your next build. The Easy Neck is completely finished and ready to go. Simply reinforce your box and bolt the neck on. Solid Okume construction with a rosewood fret board set for 24 inch scale. The neck is meticulously sanded and the Okume portion has a spray finish. The rosewood fret board is unfinished. The Easy Neck is similar to the Super Neck and installation techniques are the same so the following video applies.   Bridge placement template Watch This Video:

Set includes 4 30 inch strings for baritone ukuleles. Strings are numbered 1-4 and sizes included are .026 and .031 in nylon and .029 and .037 in metal wrapped strings. Tuning is dgbe.

If we do a special item, use this to pay for it in increments of $5.00

Available in 3 and 4 string models, these new MGB Pitch Benders can add a new dimension to your CBGs. Includes all of the chrome finished components and hardware needed. Also includes a template to provide accurate location and sizing of hole for the bridge and locations for mounting screws. Critical steps for installation: Use the template (included) for accurate lay-out of holes. Make sure to line up the box center line and scale length line.  Secure anchor block (2 1/2 x 4  inches) to inside of lid. It should meet with edge of hole. The bridge screws will need to go through the lid and into the block. Do not over tighten screws that secure the bridge. The bridge must lay flat against the box, see pic. The bridge will need to pivot to shorten the strings and bend the pitch. Anchor the springs to provide tension, you can use the spring bracket or install screws in the anchor block. Our experience shows that stretching the strings about 1/2 inch from the normal state provides the right tension. This tension will will keep the bridge flat and allow tuning. Bending the bar will further stretch the springs and allow the bridge to pivot. The 3 string uses two springs and the 4 string uses three springs. The strings are bottom loading so access through the back of the box is needed.

Walnut 3 inch cover plate with hardware. 

Quality Acoustic Guitar Strings | Made in the USA Steel 0.046 Gauge About 44" in length  3 Pack Made in the USA

MGB paint can lid trim ring Trim ring fits used with MGB paint can lid reso Trim ring also used as template to make the perfect cutout for the paint can lid Available in two colors, maple and walnut

Includes 2  6mm by 2 inch hanger bolts, 4 nuts and 4 washers. Includes a 1.25 inch by 2 inch reinforcement plate

Cable piezo Piezo section is 3.5 inches long Cable section is 12 inches long 2.5mm plug  Plug can be removed wire can be connected to other components

Maple 3 inch cover plate with hardware. 

Quality Acoustic Guitar Strings | Made in the USA Steel 0.035 Gauge About 44" in length  3 Pack Made in the USA

Beautiful High Quality Maple 0.25 inches thick 19 inches long 1.63 inches wide at the narrow end 2.25 inches wide at the wide end 25.5 inch scale length Suitable for 3 or 4 or 6 string applications   Perfect for builders who want to build their necks but want a precisely made finger board.    Check the length of the fretboard at the 12th fret down from nut end, it should measure 12 3/4 inches. Trim at nut end as needed.

Designed to work with our 3/4 String Mini Box Bucker Pickups. Dimensions: 2-3/4" x 2" x 0.25" Gold finish Includes gold hardware Compatible with: MGB Mini Box Bucker Pickup 2.0 | 3/4 String MGB Mini Box Bucker Pickup 4.0 | 3/4 String

Polypropylene mesh strap material perfect for all MGB guitar body kits. 1-7/8" x 52" Roll.

Quality Acoustic Guitar Strings | Made in the USA Steel 0.017 Gauge About 44" in length  3 Pack Made in the USA